Pioneer XW-BTSP70 User manual

Category
Bluetooth music receivers
Type
User manual
Wireless Speaker System
Enceinte sans fil
XW-BTSP70
Instruction Manual
Manuel d’instructions
Manual de Instrucciones
Manuale di istruzioni
Bedienungsanleitung
Gebruiksaanwijzing
XW-BTSP70.book 1 ページ 2015年6月29日 月曜日 午前11時33分
2
Bundled items
/ Éléments inclus / Accesorios suministrados / Accessori in dotazione / Lieferumfang / Gebundelde artikelen
XW-BTSP70.book 2 ページ 2015年6月29日 月曜日 午前11時33分
3
En
Fr
Es
It
De
Nl
Red blinking
Green blinking
Green lit
CHARGING
/ Chargement / Carga / Carica / Aufladevorgang / Laden
XW-BTSP70.book 3 ページ 2015年6月29日 月曜日 午前11時33分
7
En
Fr
Es
It
De
Nl
EN 1 Press the button so that the indicator blinks.
2 Turn the Bluetooth function on and select “XW-BTSP70” on your
device.
3 The indicator stops blinking and lights up.
4 Play back music on your device.
5 Adjust the volume.
FR 1 Appuyez sur la touche pour que le témoin clignote.
2 Activez la fonction Bluetooth et sélectionnez “XW-BTSP70” sur
votre périphérique.
3 Le témoin arrête de clignoter et devient fixe.
4 Lisez la musique sur votre périphérique.
5 Régler le volume.
ES 1 Pulse el botón de modo que el indicador parpadee.
2 Encienda la función Bluetooth y seleccione “XW-BTSP70” en su
dispositivo.
3 El indicador deja de parpadear y se enciende.
4 Reproduzca música en su dispositivo.
5 Ajuste el volumen.
IT 1 Premere il pulsante in modo che l'indicatore lampeggi.
2 Attivare la funzione Bluetooth e selezionare “XW-BTSP70” sul
proprio dispositivo.
3 L'indicatore smette di lampeggiare e rimane acceso.
4 Riprodurre la musica sul proprio dispositivo.
5 Regolazione del volume.
DE 1 Drücken Sie die -Taste, bis die -Anzeige blinkt.
2 Schalten Sie die Bluetooth Funktion ein und wählen Sie am Gerät
“XW-BTSP70” aus.
3 Die -Anzeige hört zu blinken auf und leuchtet.
4 Starten Sie die Musikwiedergabe auf dem Gerät.
5 Passen Sie die Lautstärke an.
NL 1 Druk op de -knop zodat het -controlelampje knippert.
2 Schakel de Bluetooth functie in en selecteer “XW-BTSP70” op uw
apparaat.
3 Het -controlelampje stopt met knipperen en gaat branden.
4 Muziek op uw apparaat afspelen.
5 Regel het volume.
XW-BTSP70.book 7 ページ 2015年6月29日 月曜日 午前11時33分
8
Power indicator
0 (When running on the battery) The indicator lights green when the
power is turned on. It turns red when the remaining charge in the
battery becomes low. It goes out when the unit is on standby.
0 (During recharging) The indicator blinks either red (when battery charge
is low) or green, irrespective of whether the unit is on or on standby. The
indicator turns green when recharging is complete.
0 When the battery runs out of charge, the indicator blinks alternating
between red and green.
Regarding the pairing
0 The pairing mode takes about 5 minutes.
0 This unit can store the data of up to eight paired devices. The
information for the oldest paired device is deleted when you try to pair a
ninth device. The procedure for pairing for other devices is the same as
for the first device.
0 All pairing information is deleted if you press and hold the button for
10 seconds or more. To pair a device again, first delete the pairing
information for the unit on the Bluetooth enabled device.
Regarding the playback
0 If the volume setting on the Bluetooth enabled device is low, the sound
will not be output from this unit, so adjust the volume to an appropriate
level.
0 If the unit receives no input signal for 20 minutes, it switches to standby
automatically (auto-standby feature). If there is no Bluetooth connection
with the unit for 5 minutes, it also switches to standby automatically.
0 If you are playing at near the maximum volume and the battery charge
becomes low, the volume is automatically reduced.
0 Due to the characteristics of Bluetooth wireless technology, the sound
produced on this unit may slightly be behind the sound played on the
Bluetooth enabled device.
Advanced instructions
English
XW-BTSP70.book 8 ページ 2015年6月29日 月曜日 午前11時33分
En
9
Smart standby mode (disabled by default)
This mode enables the unit to come on automatically even if it is on
standby when a Bluetooth enabled device is connected or there is a signal
input through the AUDIO IN jack. This works only when the recharging AC
adapter is connected. To enable this feature, while the power is on, press
and hold the button for about 3 seconds until the power indicator blinks
orange twice. When enabled, the power indicator will light orange when
the unit is on standby. To disable this feature, press and hold the button
for about 3 seconds until the power indicator blinks orange once.
0 To switch the unit to standby when smart standby mode is enabled, first
disable the connection with any Bluetooth enabled devices.
Multipoint feature
You can connect two Bluetooth enabled devices at the same time to this
unit.
0 When playing from one and you want to start play from the other, first
stop the device playing. Note that the multipoint feature does not work
together with the TWS feature.
0 To connect a third device, you must first disable the connection of one
of the connected devices.
Playing a device connected to the AUDIO IN jack
You can play the audio from an external player by connecting the audio
output jack of the player to the AUDIO IN jack of this unit using a stereo
mini plug cable.
0 Audio input automatically switches to AUDIO IN jack connection when
a cable is connected to the AUDIO IN jack. To play from a Bluetooth
device again after this, either remove the cable from the AUDIO IN jack
or press the button to switch to B lu etooth playback.
XW-BTSP70.book 9 ページ 2015年6月29日 月曜日 午前11時33分
10
True Wireless Stereo (TWS) feature
You can use one of these units as the speaker for the right side and one
for the left side.
Setting
1. Press the
button to turn the unit on. If a Bluetooth enabled device is
connected, disable the connection.
2. On the unit that will be on the right side, press and hold the
button
and the “+” button for 3 or more seconds until the muting indicator blinks
orange.
0 Make the TWS settings starting with the unit that will be on the right.
If you have already paired devices with one of these units, make that
unit the right side.
3. On the unit that will be on the left side, press and hold the
button
and the “–” button for 3 or more seconds until the muting indicator blinks
white.
4. When the connection of the right and left side is completed, the muting
indicator lights orange on the right side and white on the left side.
5. Pair Bluetooth enabled devices with the right side device.
0 To disable the TWS feature, first turn both units on, then, on either of
the units, press and hold the and the button for 3 or more
seconds. The muting indicator goes out when the feature is disabled.
The feature is also disabled automatically on the other unit, but if the
muting indicator on the other unit does not go out, repeat the above
disabling procedure.
Play
When you operate one of the units, the other unit also operates, allowing
you to turn both off or to adjust the volume of both units at the same time.
0 Connect to the unit on the right when you want to play an audio by
connecting to the AUDIO IN jack with the TWS feature.
0 The delay in the playback sound when using the TWS feature increases
compared to when you are using just one unit. The maximum
communication range (distance) is also reduced by about half.
XW-BTSP70.book 10 ページ 2015年6月29日 月曜日 午前11時33分
En
11
Protection circuit
The protection circuit has worked if the power indicator is blinking red fast.
Switch the unit to standby then request repairs.
Resetting the unit to its default status
If the unit stops working properly, you may be able to restore correct
operation by resetting it to its default status. Turn the unit on, then press
and hold the button for 10 seconds or more until the power indicator
goes out.
0 If you have enabled the TWS feature, reset both of the units.
Restarting
When the unit is not responding to operations, you may
be able to restore proper operation by restarting the
unit. Use the point of a pin or other similarly thin item
and push into the small hole (reset hole) to the left of
the AUDIO IN jack.
Specifications
General
Power supply: AC 100 - 240 V, 50/60 Hz (Main unit: DC 5 V, 2.0 A) / Power
consumption (when using the AC adapter for recharging the main unit): 8 W, 5 W
(No-sound), 0.2 W (Stand-by) / Charging time: Approx. 4 hours / Battery operation
time: Approx. 5 hours / Dimensions (WkHkD): 180 mm k 53.5 mm k 59 mm /
Weight: 740 g / Audio inputs: Bluetooth, Analog AUDIO IN (stereo mini jack,
φ
3.5 mm)
Speaker Section
Speakers used: 40 mm driver k 2
Bluetooth Section
Bluetooth standard specification: Ver. 4.0 / Maximum communication range: 10 m
(Class 2) / Compatible Bluetooth profiles: A2DP / Supported Codecs: SBC, aptX
®
/
Supported content protection technology: SCMS-T / Maximum multi point devices: 2 /
Maximum multi pairing devices: 8 / TWS (True Wireless Stereo) supported
*
Specifications and features are subject to change without notice.
XW-BTSP70.book 11 ページ 2015年6月29日 月曜日 午前11時33分
© 2015 Onkyo & Pioneer Corporation. All rights reserved.
© 2015 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés.
“Pioneer” is a trademark of Pioneer Corporation, and is used under license.
SN 29402126
<U.S.A.>
18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.
Tel: 1-201-785-2600
<Germany>
Hanns-Martin-Schleyer-Straße 35, 47877 Willich, Germany
Tel: +49(0)2154 913222
<UK>
Anteros Building, Odyssey Business Park, West End Road, South Ruislip,
Middlesex, HA4 6QQ United Kingdom
Tel: +44(0)208 836 3612
<France>
6, Avenue de Marais F - 95816 Argenteuil Cedex FRANCE
Tel: +33(0)969 368 050
*29402126*
F1506-0
Discover the benefits of registering your product online at
http://www.pioneer.co.uk (or http://www.pioneer.eu).
Découvrez les nombreux avantages offerts en enregistrant votre produit
en ligne maintenant sur http://www.pioneer.fr (ou http://www.pioneer.eu).
Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres Produktes unter
http://www.pioneer.de (oder http://www.pioneer.eu)
Registra il tuo prodotto su http://www.pioneer.it (o http://www.pioneer.eu)
e scopri subito quali vantaggi puoi ottenere!
Ontdek nu de voordelen van online registratie! Registreer uw Pioneer product via
http://www.pioneer.nl - http://www.pioneer.be (of http://www.pioneer.eu).
Registre su producto en http://www.pioneer.es (o en http://www.pioneer.eu)
Descubra los beneficios de registrarse on-line:
XW-BTSP70.book 12 ページ 2015年6月29日 月曜日 午前11時33分
1 / 1

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document