Emerson C1300 Datasheet

Emerson
Brand
Emerson
Model
C1300
Category
Water dispensers
Type
Datasheet

Emerson C1300 is a hot water dispenser designed for large volume usage, providing up to 100 cups of near-boiling water per hour. It features a swiveling gooseneck spout, easy-action lever with automatic shut-off, and adjustable temperature control. Installation is easy with tool-free tank connections and dry start protection. The dispenser mounts in a standard sink opening or 1-1/4" drilled hole.

Emerson C1300 is a hot water dispenser designed for large volume usage, providing up to 100 cups of near-boiling water per hour. It features a swiveling gooseneck spout, easy-action lever with automatic shut-off, and adjustable temperature control. Installation is easy with tool-free tank connections and dry start protection. The dispenser mounts in a standard sink opening or 1-1/4" drilled hole.

INLET
TUBE
6-1/8"
FLEXIBLE
VENT TUBE
DRAIN PLUG
FLEXIBLE
OUTLET TUBE
2/3 GALLON
TANK (2.5 LITERS)
ADJUSTABL
E
THERMOSTAT
1/4" INCOMING
WATER SUPPL
Y
11
"
MIN.
5
1
/
2
"
3" MAX.
MATERIAL
THICKNESS
DISPENSER
LEVE
R
WATER PASSAGE
UNIT DEPTH
6-3/4" MA
X
14-1/2" MAX
9-7/8"
4-3/8"
7"
1-1/4"
TO
1-1/2"
HOLE
PROJECT:
MODEL C1300
Hot Water Dispenser
APPLICATION: Designed for large volume usage of
steaming hot water. Up to 100 cups of 200˚ hot water pe
r
hour are provided by the system’s 2/3 gallon tank. Saves
time, work and water — you only heat the water you use.
FEATURES
• Foodservice grade heating element provides
100 cups of near-boiling water per hour
• Swiveling gooseneck spout travels 90° to provide
clearance for large vessels
• Easy-action lever with automatic shut-off
• Durable all brass faucet with polished chrome finish
• 2/3 gallon Stainless Steel Tank construction for longer life
• Easy-to-adjust temperature control on front panel
• Mounts in standard sink opening or 1-1/4" drilled hole
• Tool-free tank connections and dry start protection
for easy installation
• 1-year full warranty on parts and labor
SPECIFICATIONS
Capacity 2/3 gallon tank dispenses
100 cups of 200ºF water per hour
Electrical 120 volts A.C., 1300 watts,
10.8 amp heating element with
36" cord and grounded plug
Thermostat Snap action, adjustable fro
m
160°F to 210ºF (factory pre-set
at approximately 200°F)
Insulatio
n Meets U.L. 94HF-1
flammability specification
Valve Instant, self-closing
Recommended
Supply Pressure 30-125 ps
i
Shipping Weight Approximately 11.5 lbs.
To ensure optimum performance, maximum distanc
e
between tank and dispenser head should be 16" or less
© InSinkErator Printed in USA Form No.F294-06E-19-02
InSinkErator is a division of Emerson Electric Co.
4700 21st STREE
T
RACINE, WI 53406
TEL: 800-845-8345
FAX: 262-554-3620
www.insinkerator.com
The Emerson logo is a
trademark and a
service mark of
Emerson Electric Co
.
ITEM NO.:
  • Page 1 1

Emerson C1300 Datasheet

Emerson
Brand
Emerson
Model
C1300
Category
Water dispensers
Type
Datasheet

Emerson C1300 is a hot water dispenser designed for large volume usage, providing up to 100 cups of near-boiling water per hour. It features a swiveling gooseneck spout, easy-action lever with automatic shut-off, and adjustable temperature control. Installation is easy with tool-free tank connections and dry start protection. The dispenser mounts in a standard sink opening or 1-1/4" drilled hole.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents