InSinkErator F-HC1100SN Specification

  • Hello! I am an AI chatbot trained to assist you with the InSinkErator F-HC1100SN Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
6-1/8"
10-7/8"
6-3/4"
2 1/4"
12 1/2
"
5-1/ 4"
5-1/ 2"
8-3/4"
NOTE: Max counter thickness is 3".
Cold Side
Water Supply
Hot Side
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
1/4" Incoming
Water Supply
Minimum 2-5/8" required
from sink hole center
to backsplash
Dimensions
WDT512-16C-83-10
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model F-HC1100 with 2/3-gallon
hot water tank, adjustable temperature from
160°F to 210°F and instant, self-closing hot valve.
Warranty:
5-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
Printed in USA
The Next
Necessity
Our finest line of instant hot water dispensers
for use with our Hot Water Tank for filtered
near-boiling 200°F and cool drinking water
Tank with filter sold separately (HWT-F1000S)
Instant Hot Water Dispensers
F-HC1100
Submittal Sheet
Hot & Cool – Dispenses near-boiling
200°F water and cool drinking water
• Graceful high-arching spout swivels for
greater convenience and stylish integrated
levers provides a dramatic look
• Hot lever automatically shuts off, while
Stay-On
cool lever remains on for easy use
• Durable all brass faucet construction
5-Year In-Home
Limited Warranty*
• For use with InSinkErator Hot Water
Tank and F-1000S Filtration System
Available in these designer finishes:
white, biscuit, French gold, satin nickel,
polished nickel, chrome, brushed chrome,
mocha bronze, oil rubbed bronze, matte
black, gloss black, classic oil-rubbed bronze
and brushed bronze
• Unit not for commercial/industrial use
Specifications
Shipping Weight
Instant, self-closing
Required
Hole Diameter
1 -3/8" – 1 -1/2"
standard sink hole
Hot Valve
Manual return
Cold Valve
Approximately
4.0 lbs.
1-800-558-5700
USA
www.insinkerator.com
Complies with
California Lead
Plumbing Law
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
©2016 InSinkErator, InSinkErator
®
is a business
unit of Emerson Electric Co. All Rights Reserved.
1-800-558-5700
Canada
www.insinkerator.ca
Certified to
NSF/ANSI 372
0.25% lead
We Come To You
®
/