Philips 22PFK4209/12, 42PFT5509 User manual

  • Hello! I am an AI chatbot trained to assist you with the Philips 22PFK4209/12 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
English
1 InserttheUSBashdriveintoaUSBport
onyourPC.
2 FromyourPC,navigatetowww.philips.
com/support.
3 Findyourproductandlocatethe
softwareanddriversavailableforyourTV
set.
Thesoftwareisavailableasaziple.
4 Ifthesoftwareversionishigherthanthe
versiononyourTV,clickthesoftware
updatelink.
5 Acceptthelicenseagreementandsave
theZIPletotheUSBashdrive.
6 Usingthearchiveutility,extract‘autorun.
upg’totherootdirectoryoftheUSB
ashdrive.
7 DisconnecttheUSBashdrivefromthe
PC.
Step 3: Update the TV software
Warning
DonotswitchofftheTVorremovetheUSBash
driveduringthesoftwareupdate.
Ifapowerfailureoccursduringtheupdate,donot
removetheUSBashdrivefromtheTV.TheTVwill
continuetheupdateassoonaspowerisrestored.
Ifanerroroccursduringtheupdate,retrythe
procedure.Iftheerrorreoccurs,contactPhilips
ConsumerCare.
1 SwitchofftheTVanddisconnectallUSB
storagedevices.
2 ConnecttheUSBashdrive(containing
thesoftwareupdate)totheUSB
connectorontheTV.
3 SwitchontheTV.
TheTVdetectstheUSBashdrive
andstartstoscanforsoftware
version.
Amessagepromptsyoutoupdate
thesoftware.
»
»
»
Update the TV
software
P
Philips continuouslytriestoimproveits
productsandwerecommendthatyouupdate
theTVsoftwarewhenupdatesareavailable.
What you need
ToupdatewithaUSBstoragedevice,you
need:
AnemptyUSBashdrive.TheUSBash
drivemustbeFATorDOS-formatted.
DonotuseaUSBharddrive.
AcomputerwithInternetaccess
AnarchiveutilitythatsupportstheZIP
leformat(forexample,WinZip®for
Microsoft®Windows®orStuft®for
Macintosh®).
Step 1: Check the current software
version
1 Press .
2 Select[Setup] > [Software settings] >
[Current software info],thenpressOK.
Thecurrentsoftwareinformationis
displayed.
3 Writedownthesoftwareversion
number.
4 Toreturn,pressOK.
5 Toexit,press .
Step 2: Download the latest software
Caution
Donotinstallalowerversionofsoftwarethanthe
currentversioninstalledonyourproduct.Philips
cannotbeheldliableorbemaderesponsiblefor
problemscausedbyasoftwaredowngrade.
»
EN
Note
IftheUSBashdriveisnotdetected,disconnectit
andreconnectagain.
4 Followtheon-screeninstructionsto
updatetheTVsoftware.
5 Oncecomplete,disconnecttheUSBash
drivefromtheTV.
6 Select[Restart],thenpressOKto
restarttheTV.
Note
TopreventaccidentalupdatestotheTVsoftware,
deletethe‘autorun.upg’lefromtheUSBashdrive.
2 EN
/