V-ZUG 286 Installation guide

Brand: V-ZUG

Model: 286

Type: Installation guide

This manual is also suitable for

284

V-ZUG 286 is a washer-dryer column with a Pronto-Combi connection, suitable for one-family households. It features a drain connector with a cover, a hose retainer, and a connector housing with a clamp. The rear leveling feet can be adjusted. The tumble dryer has a pump cover, a blanking plug, and a cover that can be mounted with screws.

V-ZUG 286 is a washer-dryer column with a Pronto-Combi connection, suitable for one-family households. It features a drain connector with a cover, a hose retainer, and a connector housing with a clamp. The rear leveling feet can be adjusted. The tumble dryer has a pump cover, a blanking plug, and a cover that can be mounted with screws.

Page is loading ...

Page is loading ...

Page is loading ...

Installation instructions

Tumble-dryer tower with Pronto-Combi connection

One-family hausehold

J284.551

20.12.07 PUK

4/4

These installation instructions apply to the models: 284, 286

Validity

Installation

1. Remove cover A at rear.

2. Mount connector housing B to drain connector C and

screw firmly (moisten drain connector).

3. Place hose in retainer D.

4. Attach retainer D with hose to installation plate and secure

firmly with 2 screws (4 × 16).

5. Fit hose to connector housing and secure with clamp E.

ProntoCombi connection set: W5.0040

Screw rear levelling feet – where present – back as far as stop.

Preaparatory work on tumbledryer

6. Cut off cover F at socket, using a knife (marking).

7. Remove pump cover G.

8. Remove plug H from pump and insert in socket at position

provided.

9. Mount blanking plug J from the set on pump connector.

10. Mount cover K to pump cover G with 2 screws (3 × 9) and

then refit the pump cover to the tumble-dryer.

A

B

C

D

E

Cut off, using knife

View from below

View from rear

F

K

G

Plug in on other side

H

J

1
2
3
4

V-ZUG 286 Installation guide

Brand: V-ZUG

Model: 286

Type: Installation guide

This manual is also suitable for

284

V-ZUG 286 is a washer-dryer column with a Pronto-Combi connection, suitable for one-family households. It features a drain connector with a cover, a hose retainer, and a connector housing with a clamp. The rear leveling feet can be adjusted. The tumble dryer has a pump cover, a blanking plug, and a cover that can be mounted with screws.

in other languages

italiano: V-ZUG 286 Guida d'installazione
français: V-ZUG 286 Guide d'installation
Deutsch: V-ZUG 286 Installationsanleitung

Related papers

Other documents