Body-Solid SR-HEXDBLP4 Assembly Manual

Brand: Body-Solid

Model: SR-HEXDBLP4

Category: Fitness, gymnastics & weight training

Type: Assembly Manual

This manual is also suitable for

Body-Solid SR-HEXDBLP4 Functional Training Rig is a versatile piece of exercise equipment that allows for a wide range of workouts, targeting various muscle groups and improving overall body conditioning. Its sturdy construction and multiple attachment points make it suitable for various exercises, including pull-ups, dips, squats, and Olympic lifts. With its adjustable height and multiple grip positions, the SR-HEXDBLP4 accommodates users of different heights and fitness levels, making it an excellent choice for home gyms and fitness centers.

Assembly Instructions

OWNER’S MANUAL

V. SR-HEX-052114

THE HEXAGON

FUNCTIONAL TRAINING RIG

MODEL # SR-HEX

Pro

Club

Line

ProClubLine

Warning, Safety & Maintenance

Be sure that all users carefully read and understand all

warning, safety and maintenance labels on the machine

before each use. Failure to do so may result in death or

serious injury.

It is imperative that you retain this Owner’s Manual and be

sure all warning labels are legible and intact. Replacement

Owner’s Manuals and warning labels are available from your

local Body-Solid dealer.

If you have any questions about the operation, set up or

maintenance of this machine please call our customer service

department at 1 (800) 556-3113.

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.

TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:

Inspect equipment before each workout.

Check that all nuts and bolts are in place and fully tightened.

Also, before use, check for signs of wear. Replace all worn parts immediately.

Never use equipment if any parts are damaged or missing.

FAILURE TO FOLLOW THESE RULES MAY RESULT IN INJURY.

Exercise with care. Perform your exercise at a smooth, moderate pace; never perform jerky or

uncoordinated movements that may cause injury.

DO NOT allow children or minors to play on or around this equipment.

If unsure of proper use of equipment, call your local Body-Solid distributor or the Body-Solid

customer service center at (800) 556-3113.

Consult your physician before starting your exercise program.

For your own safety, DO NOT begin any exercise program without proper instruction.

Table of Contents

• SAFETY INSTRUCTIONS.............................. PAGE 4

• PREPARATION............................................... PAGE 5

• HARDWARE LIST........................................... PAGE 6

• PART LIST....................................................... PAGE 7

• HARDWARE ILLUSTRATION......................... PAGE 8

• PARTS ILLUSTRATION ................................. PAGE 10

• ASSEMBLY INSTRUCTIONS......................... PAGE 12

• EXPLODED VIEW.......................................... PAGE 25

• CONTACT PAGE............................................ PAGE 26

Important Safety Instructions

Beforebeginninganytnessprogram,youshouldobtainacompletephysicalexaminationfromyourphysician.

Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise.

Si vous avez des etourdissements ou des faiblesses, arretez les exercices immediatement.

Antes de comenzar cualquier programma de ejercicios, deberias tener un examen sico con su doctor.

When using exercise equipment, you

should always take basic precautions,

including the following:

m ReadallinstructionsbeforeusingtheSR-HEX.

Theseinstructionsarewrittentoensureyoursafety

andtoprotecttheunit.

m Do not remove any safety labels from the

machine.

m Donotallowchildrenonorneartheequipment.

m Usetheequipmentonlyforitsintendedpurpose

asdescribedinthisguide.Donotuseaccessory

attachmentsthatarenotrecommendedbythe

manufacturer.Suchattachmentsmightcause

injuries.

m Wearproperexerciseclothingandshoesforyour

workout,nolooseclothing.

m Keephands,limbs,looseclothing,andlonghairwell

outofthewayofallmovingparts.

m Usecarewhengettingonorofftheunit.

m Donotoverexertyourselforworktoexhaustion.

m Ifyoufeelanypainorabnormalsymptoms,stop

yourworkoutimmediatelyandconsultyour

physician.

m Neveroperateunitwhenithasbeendroppedor

damaged.Returntheequipmenttoaservice

centerforexaminationandrepair.

m Donotusetheequipmentoutdoorsornearwater.

Personal Safety During Assembly

m Beforebeginningassembly,pleasetakethetime

toreadtheinstructionsthoroughly.

m Readeachstepintheassemblyinstructionsand

followthestepsinsequence.Donotskipahead.

Ifyouskipahead,youmaylearnlaterthatyou

havetodisassemblecomponentsandthatyou

mayhavedamagedtheequipment.

m Assembleandoperatethe SR-HEXonasolid,

levelsurface.Locatetheunitafewfeetfromthe 

wallsorfurnituretoprovideeasyaccess.

TheSR-HEX isdesignedforyourenjoyment.By

followingtheseprecautionsandusingcommonsense,

youwillhavemanysafeandpleasurablehoursof

healthfulexercisewithyourPro Club Line by

Body-Solid, Hexagon Functional Training Rig.

Afterassembly,youshouldcheckallfunctionsto

ensurecorrectoperation.Ifyouexperienceproblems,

rstrechecktheassemblyinstructionstolocateany

possibleerrorsmadeduringassembly.Ifyouareunable

tocorrecttheproblem,callthedealerfromwhomyou

purchasedthemachineorcall1-800-556-3113forthe

dealernearestyou.

Obtaining Service

PleaseusethisOwner’sManualtomakesurethatall

partshavebeenincludedinyourshipment.When

orderingparts,youmustusethepartnumberand

descriptionfromthisOwner’sManual.Useonly

Body-Solidreplacementpartswhenservicingthis

machine.Failuretodosowillvoidyourwarrantyand

couldresultinpersonalinjury.

Forinformationaboutproductoperationorservice,

checkouttheofcialBody-SolidInc.websiteat

www.bodysolid.comorcontactanauthorized

Body-SoliddealeroraBody-Solidfactory-authorized

servicecompanyorcontactBody-Solidcustomer

serviceatoneofthefollowing:

Toll Free: 1-800-556-3113

Phone: 1-708-427-3555

Fax: 1-708-427-3556

Hours: M-F 8:30-5:00 CST

E-Mail: [email protected]

Or write to: Body-Solid, Inc.

Service Department

1900 S. Des Plaines Ave.

Forest Park, IL 60130 USA

Retain this Owner’s Manual for future

reference. If you need to order replacement

parts please be prepared to provide the

following information when contacting us so

that we can assist you better.

1. Model Number

2. Place of Purchase

3. Serial Number (S/N)

4. Part # and Description

Preparation

ThankyouforpurchasingtheSR-HEX.ThisRigispartofProClubLinebyBody-Solidofqualitystrengthtraining

machines,whichletsyoutargetspecicmusclegroupstoachievebettermuscletoneandoverallbody

conditioning.TomaximizeyouruseoftheequipmentpleasestudythisOwner’sManualthoroughly.

Body-Solidcontinuallyseekswaystoimprovetheperformance,specicationsandproductmanualsinordertoensurethatonly

superiorproductsarereleasedfromourfactories.Pleasetakethetimetocarefullyreadthroughthismanualthoroughly.Instructions

containedinthisdocumentarenotintendedtocoveralldetailsorvariationspossiblewithBody-Solidequipment,ortocoverevery

contingencythatmaybemetinconjunctionwithinstallation,operation,maintenanceortroubleshootingoftheequipment.Even

thoughwehavepreparedthismanualwithextremecare,neitherthepublishernortheauthorcanacceptresponsibilityforanyerrors

in,oromissionfrom,theinformationgiven.Shouldadditionalinformationberequired,orshouldsituationsarisethatarenotcovered

bythismanual,themattershouldbedirectedtoyourlocalBody-Solidrepresentative,ortheServiceDepartmentatBody-SolidInc.

inForestPark,Illinois.

Required Tools

Thebasictoolsthatyoumustobtainbeforeassembling

theSR-HEXincludebutarenotlimitedto:

m MetricWrenchSet

m AdjustableWrench

m BoltsandNutsrequire30mmWrenches

Installation Requirements

Followtheseinstallationrequirementswhenassembling

theSR-HEX:

SetuptheSR-HEXonasolid,atsurface.Asmooth,

atsurfaceunderthemachinehelpskeepitlevel.Alevel

machinehasfewermalfunctions.

Provideamplespacearoundthemachine.Open

spacearoundthemachineallowsforeasieraccess.

Insertallboltsinthesamedirection.Foraesthetic

purposes,insertallboltsinthesamedirectionunless

specied(intextorillustrations)todootherwise.

Leaveroomforadjustments.Tightenfastenerssuchas

bolts,nuts,andscrewssotheunitisstable,butleave

roomforadjustments.Donotfullytightenfasteners

untilinstructedintheassemblystepstodoso.TheRig

mustbeboltedtotheoorandinstalledprofessionally.

Fill out and mail the warranty card.

Assembly Tips

Readall“Notes”oneachpagebeforebeginningeach

step.

WhileyoumaybeabletoassembletheSR-HEX

usingtheillustrationsonly,importantsafetynotesand

othertipsareincludedinthetext.

Somepiecesmayhaveextraholesthatyouwillnotuse.

Useonlythoseholesindicatedintheinstructionsand

illustrations.

NOTE: Withsomanyassembledparts,proper

 alignmentandadjustmentiscritical.While

 tighteningthenutsandbolts,besuretoleave

 roomforadjustments.

NOTE: Thebottlesthataremarked“Poison”areyour

 touchuppaint.Keepawayfromchildren.

CAUTION: Obtainassistance!Donotassemblethe 

SR-HEXbyyourself.Thiscouldresultin 

 injury.Reviewtheinstallationrequirements 

 beforeproceedingwiththefollowingsteps.

YourS/N#can

befoundhere

↑

Part# Size Description Quantity

SR-HEX Hardware List

M10X115mm

M20

M20x3T

M20x8T

M12x105mm

M12

HEX HEAD BOLT

NYLON LOCK NUT

FLAT WASHER

HEX HEAD BOLT

NYLON LOCK NUT

FLAT WASHER

24 PCS.

32PCS.

16 PCS.

16 PCS

32PCS

SR-HEX Part List

Part# Description Quantity

UPRIGHT

END CROSS FRAME

MID CROSS FRAME

END FOOT PLATE

MID FOOT PLATE

6 PCS.

4 PCS.

2 PCS.

4 PCS.

2 PCS

SR-HEX Hardware Illustration

Part#1  HEXHEADBOLTM20x115mm     QTY.24

Part#2  NYLONLOCKNUTM20      QTY.24

Part#3  FLATWASHERM20x3T      QTY.32

Part#4  FLATWASHERM20x8T      QTY.16

SR-HEX Hardware Illustration

Part#5  HEXHEADBOLTM12x105mm     QTY.16

Part#6  NYLONLOCKNUTM12      QTY.16

Part#7  FLATWASHERM12      QTY.32









































































































































































































































































































































































SR-HEX Parts Illustration

Part#8-UPIGHT,6pcs    

Part#10-MIDCROSSFRAME,2pcs    

Part#9-ENDCROSSFRAME,4pcs    

Part#11-ENDFOOTPLATE,4pcs    

SR-HEX Parts Illustration

Part#12-MIDFOOTPLATE,2pcs    

STEP

Be careful to assemble all components

in the sequence they are presented.

NOTE:

Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.

Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully

go on.

1A. AttachEndCrossFrame(9)toUprights(8)using:

2 - (#1) M20x115mm Hex Head Bolt

2 - (#3) M20x3T Flat Washer

2 - (#4) M20x8T Flat Washer

2 - (#2) M20 Nylon Lock Nut

1B. AttachEndCrossFrame(9),anotherUpright(8)andMidCross

 Frame(10)togetherusing

4 - (#1) M20x115mm Hex Head Bolt

6 - (#3) M20x3T Flat Washer

2 - (#4) M20x8T Flat Washer

4 - (#2) M20 Nylon Lock Nut

NOTE: Two persons are required for installing the Rig.

STEP

AboveshowsStep1assembledandcompleted.

STEP

Be careful to assemble all components

in the sequence they are presented.

NOTE:

Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.

Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully

go on.

2A. AttachEndCrossFrame(9),Upright(8)andMidCrossFrame(10)

 togetherusing

4 - (#1) M20x115mm Hex Head Bolt

6 - (#3) M20x3T Flat Washer

2 - (#4) M20x8T Flat Washer

4 - (#2) M20 Nylon Lock Nut

STEP

AboveshowsStep2assembledandcompleted.

STEP

3A. AttachUpright(8)toEndCrossFrame(9 in gray color)using:

2 - (#1) M20x115mm Hex Head Bolt

2 - (#3) M20x3T Flat Washer

2 - (#4) M20x8T Flat Washer

2 - (#2) M20 Nylon Lock Nut

3B. AttachUpright(8)toEndCrossFrame(9)using:

2 - (#1) M20x115mm Hex Head Bolt

2 - (#3) M20x3T Flat Washer

2 - (#4) M20x8T Flat Washer

2 - (#2) M20 Nylon Lock Nut

Be careful to assemble all components

in the sequence they are presented.

NOTE:

Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.

Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully

go on.

STEP

AboveshowsStep3assembledandcompleted.

STEP

4A. AttachEndCrossFrame(9),Upright(8)andMidCrossFrame(10)

 togetherusing

4 - (#1) M20x115mm Hex Head Bolt

6 - (#3) M20x3T Flat Washer

2 - (#4) M20x8T Flat Washer

4 - (#2) M20 Nylon Lock Nut

Be careful to assemble all components

in the sequence they are presented.

NOTE:

Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.

Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully

go on.

STEP

AboveshowsStep4assembledandcompleted.

STEP

5A. AttachEndCrossFrame(9),Uprights(8)andMidCrossFrame(10)

 togetherusing

6- (#1) M20x115mm Hex Head Bolt

8 - (#3) M20x3T Flat Washer

4 - (#4) M20x8T Flat Washer

6 - (#2) M20 Nylon Lock Nut

Be careful to assemble all components

in the sequence they are presented.

NOTE:

Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.

Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully

go on.

Page is loading ...

Body-Solid SR-HEXDBLP4 Assembly Manual

Brand: Body-Solid

Model: SR-HEXDBLP4

Category: Fitness, gymnastics & weight training

Type: Assembly Manual

This manual is also suitable for

Download PDF

report

Body-Solid SR-HEXDBLP4 Assembly Manual

This manual is also suitable for

Body-Solid SR-HEXDBLP4 Assembly Manual

Related papers

Other documents