Body-Solid HEXAGONPRO Assembly Manual

Brand
Body-Solid
Model
HEXAGONPRO
Category
Fitness, gymnastics & weight training
Type
Assembly Manual

This manual is also suitable for

&
Assembly Instructions
OWNER’S MANUAL
V. SR-HEXP-050114
THE HEXAGON PRO
FUNCTIONAL TRAINING RIG
MODEL # SR-HEXP
Pro
Club
Line
ProClubLine
Warning, Safety & Maintenance
2
Be sure that all users carefully read and understand all
warning, safety and maintenance labels on the machine
before each use. Failure to do so may result in death or
serious injury.
It is imperative that you retain this Owner’s Manual and be
sure all warning labels are legible and intact. Replacement
Owner’s Manuals and warning labels are available from your
local Body-Solid dealer.
If you have any questions about the operation, set up or
maintenance of this machine please call our customer service
department at 1 (800) 556-3113.
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
Inspect equipment before each workout.
Check that all nuts and bolts are in place and fully tightened.
Also, before use, check for signs of wear. Replace all worn parts immediately.
Never use equipment if any parts are damaged or missing.
FAILURE TO FOLLOW THESE RULES MAY RESULT IN INJURY.
Exercise with care. Perform your exercise at a smooth, moderate pace; never perform jerky or
uncoordinated movements that may cause injury.
DO NOT allow children or minors to play on or around this equipment.
If unsure of proper use of equipment, call your local Body-Solid distributor or the Body-Solid
customer service center at (800) 556-3113.
Consult your physician before starting your exercise program.
For your own safety, DO NOT begin any exercise program without proper instruction.
WARNING
Upright must be attached to
oor before use. Inspect all
foot attachments prior to use.
Do not use if any of the foot
attachments are loose.
Table of Contents
3
• SAFETY INSTRUCTIONS.............................. PAGE 4
• PREPARATION............................................... PAGE 5
• HARDWARE LIST........................................... PAGE 6
• PART LIST....................................................... PAGE 7
• HARDWARE ILLUSTRATION......................... PAGE 8
• PARTS ILLUSTRATION ................................. PAGE 9
• ASSEMBLY INSTRUCTIONS......................... PAGE 10
• EXPLODED VIEW.......................................... PAGE 21
• CONTACT PAGE............................................ PAGE 22
Important Safety Instructions
4
Beforebeginninganytnessprogram,youshouldobtainacompletephysicalexaminationfromyourphysician.
Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise.
Si vous avez des etourdissements ou des faiblesses, arretez les exercices immediatement.
Antes de comenzar cualquier programma de ejercicios, deberias tener un examen sico con su doctor.
When using exercise equipment, you
should always take basic precautions,
including the following:
m ReadallinstructionsbeforeusingtheSR-HEXP.
Theseinstructionsarewrittentoensureyoursafety
andtoprotecttheunit.
m Do not remove any safety labels from the
machine.
m Donotallowchildrenonorneartheequipment.
m Usetheequipmentonlyforitsintendedpurpose
asdescribedinthisguide.Donotuseaccessory
attachmentsthatarenotrecommendedbythe
manufacturer.Suchattachmentsmightcause
injuries.
m Wearproperexerciseclothingandshoesforyour
workout,nolooseclothing.
m Keephands,limbs,looseclothing,andlonghairwell
outofthewayofallmovingparts.
m Usecarewhengettingonorofftheunit.
m Donotoverexertyourselforworktoexhaustion.
m Ifyoufeelanypainorabnormalsymptoms,stop
yourworkoutimmediatelyandconsultyour
physician.
m Neveroperateunitwhenithasbeendroppedor
damaged.Returntheequipmenttoaservice
centerforexaminationandrepair.
m Donotusetheequipmentoutdoorsornearwater.
Personal Safety During Assembly
m Beforebeginningassembly,pleasetakethetime
toreadtheinstructionsthoroughly.
m Readeachstepintheassemblyinstructionsand
followthestepsinsequence.Donotskipahead.
Ifyouskipahead,youmaylearnlaterthatyou
havetodisassemblecomponentsandthatyou
mayhavedamagedtheequipment.
m Assembleandoperatethe SR-HEXPonasolid,
levelsurface.Locatetheunitafewfeetfromthe
wallsorfurnituretoprovideeasyaccess.
Itmustbeprofessionallymountedtotheground.
TheSR-HEXP isdesignedforyourenjoyment.By
followingtheseprecautionsandusingcommonsense,
youwillhavemanysafeandpleasurablehoursof
healthfulexercisewithyourPro Club Line by
Body-Solid, Hexogan Functional Training Rig.
Afterassembly,youshouldcheckallfunctionsto
ensurecorrectoperation.Ifyouexperienceproblems,
rstrechecktheassemblyinstructionstolocateany
possibleerrorsmadeduringassembly.Ifyouareunable
tocorrecttheproblem,callthedealerfromwhomyou
purchasedthemachineorcall1-800-556-3113forthe
dealernearestyou.
Obtaining Service
PleaseusethisOwner’sManualtomakesurethatall
partshavebeenincludedinyourshipment.When
orderingparts,youmustusethepartnumberand
descriptionfromthisOwner’sManual.Useonly
Body-Solidreplacementpartswhenservicingthis
machine.Failuretodosowillvoidyourwarrantyand
couldresultinpersonalinjury.
Forinformationaboutproductoperationorservice,
checkouttheofcialBody-SolidInc.websiteat
www.bodysolid.comorcontactanauthorized
Body-SoliddealeroraBody-Solidfactory-authorized
servicecompanyorcontactBody-Solidcustomer
serviceatoneofthefollowing:
Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
Fax: 1-708-427-3556
Hours: M-F 8:30-5:00 CST
E-Mail: [email protected]
Or write to: Body-Solid, Inc.
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Retain this Owner’s Manual for future
reference. If you need to order replacement
parts please be prepared to provide the
following information when contacting us so
that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
Preparation
5
ThankyouforpurchasingtheSR-HEXP.ThisRigispartofProClubLinebyBody-Solidofqualitystrengthtraining
machines,whichletsyoutargetspecicmusclegroupstoachievebettermuscletoneandoverallbody
conditioning.TomaximizeyouruseoftheequipmentpleasestudythisOwner’sManualthoroughly.
Body-Solidcontinuallyseekswaystoimprovetheperformance,specicationsandproductmanualsinordertoensurethatonly
superiorproductsarereleasedfromourfactories.Pleasetakethetimetocarefullyreadthroughthismanualthoroughly.Instructions
containedinthisdocumentarenotintendedtocoveralldetailsorvariationspossiblewithBody-Solidequipment,ortocoverevery
contingencythatmaybemetinconjunctionwithinstallation,operation,maintenanceortroubleshootingoftheequipment.Even
thoughwehavepreparedthismanualwithextremecare,neitherthepublishernortheauthorcanacceptresponsibilityforanyerrors
in,oromissionfrom,theinformationgiven.Shouldadditionalinformationberequired,orshouldsituationsarisethatarenotcovered
bythismanual,themattershouldbedirectedtoyourlocalBody-Solidrepresentative,ortheServiceDepartmentatBody-SolidInc.
inForestPark,Illinois.
Required Tools
Thebasictoolsthatyoumustobtainbeforeassembling
theSR-HEXPincludebutarenotlimitedto:
m MetricWrenchSet
m AdjustableWrench
m HexBoltsandNutsrequire30mmWrenches
Installation Requirements
Followtheseinstallationrequirementswhenassembling
theSR-HEXP:
SetuptheSR-HEXPonasolid,atsurface.Asmooth,
atsurfaceunderthemachinehelpskeepitlevel.A
levelmachinehasfewermalfunctions.
Provideamplespacearoundthemachine.Open
spacearoundthemachineallowsforeasieraccess.
Insertallboltsinthesamedirection.Foraesthetic
purposes,insertallboltsinthesamedirectionunless
specied(intextorillustrations)todootherwise.
Leaveroomforadjustments.Tightenfastenerssuchas
bolts,nuts,andscrewssotheunitisstable,butleave
roomforadjustments.Donotfullytightenfasteners
untilinstructedintheassemblystepstodoso.TheRig
mustbeboltedtotheoorandinstalledprofessionally.
Fill out and mail the warranty card.
Assembly Tips
Readall“Notes”oneachpagebeforebeginningeach
step.
WhileyoumaybeabletoassembletheSR-HEXP
usingtheillustrationsonly,importantsafetynotesand
othertipsareincludedinthetext.
Somepiecesmayhaveextraholesthatyouwillnotuse.
Useonlythoseholesindicatedintheinstructionsand
illustrations.
NOTE: Withsomanyassembledparts,proper
alignmentandadjustmentiscritical.While
tighteningthenutsandbolts,besuretoleave
roomforadjustments.
NOTE: Thebottlesthataremarked“Poison”areyour
touchuppaint.Keepawayfromchildren.
CAUTION: Obtainassistance!Donotassemblethe
SR-HEXPbyyourself.Thiscouldresultin
injury.Reviewtheinstallationrequirements
beforeproceedingwiththefollowingsteps.
YourS/N#can
befoundhere
↑
Part# Size Description Quantity
6
SR-HEXP Hardware List
1
2
3
4
M20X115mm
M20
M20x3T
M20x8T
HEX HEAD BOLT
NYLON LOCK NUT
FLAT WASHER
FLAT WASHER
24 PCS.
24 PCS.
32PCS.
16 PCS.
7
SR-HEXP Part List
Part# Description Quantity
5
6
7
8
UPRIGHT
END CROSS FRAME
MID CROSS FRAME RIGHT
MID CROSS FRAME LEFT
6 PCS.
4 PCS.
1 PCS.
1 PCS.
45
8
SR-HEXP Hardware Illustration
Part#1 HEXHEADBOLTM20x115mm QTY.24
Part#2 NYLONLOCKNUTM20 QTY.24
Part#3 FLATWASHERM20x3T QTY.32
Part#4 FLATWASHERM20x8T QTY.16
45
9
SR-HEXP Parts Illustration
Part#5-UPIGHT,6pcs
Part#7-MIDCROSSFRAMERIGHT,1pcs
Part#6-ENDCROSSFRAME,4pcs
Part#8-MIDCROSSFRAMELEFT,1pcs
10
STEP
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.
Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully
go on.
1. AttachEndCrossFrame(6)toUprights(5)using:
4 - (#1) M20x115mm Hex Head Bolt
6 - (#3) M20x3T Flat Washer
2 - (#4) M20x8T Flat Washer
4 - (#2) M20 Nylon Lock Nut
NOTE: Two persons are required for installing the Rig.
STEP
1
AboveshowsStep1assembledandcompleted.
11
12
STEP
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.
Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully
go on.
2A. AttachEndCrossFrame(6)toUpright(5), in gray color from Step 2
drawingusing:
2 - (#1) M20x115mm Hex Head Bolt
2 - (#3) M20x3T Flat Washer
2 - (#4) M20x8T Flat Washer
2 - (#2) M20 Nylon Lock Nut
2B. AttachEndCrossFrame(6),Upright(5)andMidCrossFrameLeft(8)
togetherusing:
4 - (#1) M20x115mm Hex Head Bolt
6 - (#3) M20x3T Flat Washer
2 - (#4) M20x8T Flat Washer
4 - (#2) M20 Nylon Lock Nut
13
STEP
2
AboveshowsStep2assembledandcompleted.
14
STEP
3
3A. AttachMidCrossFrameLeft(8),Upright(5)andEndCrossFrame(6)
togetherusing:
4 - (#1) M20x115mm Hex Head Bolt
6 - (#3) M20x3T Flat Washer
2 - (#4) M20x8T Flat Washer
4 - (#2) M20 Nylon Lock Nut
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.
Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully
go on.
15
STEP
3
AboveshowsStep3assembledandcompleted.
16
STEP
4
4A. AttachEndCrossFrames(6),Upright(5)togetherusing:
4 - (#1) M20x115mm Hex Head Bolt
4 - (#3) M20x3T Flat Washer
4 - (#4) M20x8T Flat Washer
4 - (#2) M20 Nylon Lock Nut
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.
Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully
go on.
17
STEP
4
AboveshowsStep4assembledandcompleted.
18
STEP
5
5A. AttachEndCrossFrames(6),Uprights(5)andMidCrossFrameRight(7)
togetherusing:
8 - (#1) M20x115mm Hex Head Bolt
12 - (#3) M20x3T Flat Washer
4 - (#4) M20x8T Flat Washer
8 - (#2) M20 Nylon Lock Nut
5B. Haveeachuprightprofessionallyattachedtotheoor.
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of STEP 5A. Nylon lock nuts will not fully
screw onto bolts, they must be wrench tightened to fully go on.
19
STEP
5
AboveshowsStep4assembledandcompleted.
WARNING
Upright must be attached to
oor before use. Inspect all
foot attachments prior to use.
Do not use if any of the foot
attachments are loose.
45
20
Notes
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Body-Solid HEXAGONPRO Assembly Manual

Brand
Body-Solid
Model
HEXAGONPRO
Category
Fitness, gymnastics & weight training
Type
Assembly Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents