3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Stud Wall
Place brackets (A) on the wall at the
desired locations, and mark drilling
locations with a pencil. Use of a stud
finder and level is recommended.
Drill 1.55” (40mm) deep holes using a
5/32” (4mm) drill bit. Attach brackets
to wall using M5x40 screws (B).
OPTION B: Brick/Concrete Wall
or Drywall
Place brackets (A) on the wall at the
desired locations, and mark drilling
locations with a pencil. Use of a level
is recommended. Drill 1.75” (45mm)
deep holes using a 5/16” (8mm) drill bit.
Insert anchors (C) into holes, then attach
brackets to wall using M5x40 screws (B).
STEP 2
Place shelf on brackets and mark drilling locations
with a pencil. Drill 1/2” (13mm) deep holes using a
5/32” (4mm) drill bit. Mount shelf to brackets using
M5x16 screws (D).