Green Feathers BBLED3 User guide

Quick start guide

12V inline power

Other voltage

If you have a 12-volt camera the lamp goes ‘inline’

between the camera and power supply. Before

mounting in the bird box, plug the power supply

jack into the female input (A) and then the male

jack (B) into the camera’s trailing cable.

Light sensor (outside the box)

If you have a camera of a different voltage you will

need to run a 12V power supply for the lamp

separate to the camera.

Not used

Thank you for purchasing our Bird Box Daytime LED lamp.

This clever bit of kit will greatly improve the light levels in your bird box during the

day to help your bird box camera provide the best colour images possible. It’s

designed to turn off automatically at night, so as to not upset the normal routines

of nesting birds.

Please see overleaf for instructions on how to wire in the lamp with your existing

kit. You can use the included screws or glue strips to attach the lamp to your bird

box. For more information, check out our setup video here: bit.ly/BBLED3

If you have purchased the pack with the optional power supply, this includes a

1-metre cable. If you need to extend the cable length we have 5, 10 and 20 metre

options available on our website, just search for the product code ‘21POWER’.

Daylight LED Lamp

105.016 mm105.016 mm

Download PDF