EPH Controls TA230 Installation guide

Type
Installation guide
50
°C
-5
122
°F
23
90°
IP 42
E N60529
IP 44
E N60529
1
2
blue brown
bl br
TA230 - 230Vac
TA24 - 24Vac TA24 TA230
br bl
24V ~
h = s troke
U 24 V ~ 230 V ~
t 4,5 min. 3,5 min.
h 3,5 mm 3,5 mm
F 125 N 125 N
P 3 W 2,5 W
I max 250 mA 150 mA
For use in normal environments.
TA2_ Thermal Actuator Installation Instructions
Page 1 of 2
Disconnect the power supply from any defetive appliances.
Factory setting is (NC) Normally Closed
Guidelines for the electrician; Level of contamination 2; As per EN60730
When changing from normally closed to normally open, live components are exposed.
Therefore, disconnect the power when changing.
CAUTION! Do not use if cable is defective.
1
3
5
4
2
20221020_TA2_InsIns_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.com www.ephcontrols.co.uk
For use in normal environments.
Installation Instructions
Page 2 of 2
To reset to (NC) Normally Closed
To set to (NO) Normally Open
1
2
black
60 °
1
23
230V?
2mm
1
2
white
2
1
60°
1
23
230V?
1
2
3
TA2_ Thermal Actuator
6
7
6.1
6.4
7.1 7.2 7.3 7.4
6.5 6.6
6.2 6.3
20221020_TA2_InsIns_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.com www.ephcontrols.co.uk
  • Page 1 1
  • Page 2 2

EPH Controls TA230 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI