2. EPH Controls
  3. TA2
TA2

EPH Controls TA2, TA230, TA24 User manual

  • Hello! I've reviewed the installation instructions for the EPH Controls Thermal Actuators, specifically models TA230 and TA24. The document details the necessary steps for setting up these actuators, including safety precautions and how to adjust between normally closed and normally open settings. It also provides the specifications for both models. I'm ready to answer any questions you have about the information presented.
  • What is the factory setting of the thermal actuator?
    What should I do before changing from normally closed to normally open setting?
    What are the voltage options for the thermal actuator?
    What is the stroke length for both actuator models?
    What is the spring pressure for the thermal actuator?
50
°C
-5
122
°F
23
90°
IP 42
E N60529
IP 44
E N60529
1
2
blue brown
bl br
TA230 - 230Vac
TA24 - 24Vac TA24
br bl
24V ~
For use in normal environments.
TA2_ Thermal Actuator Installation Instructions
Page 1 of 2
Disconnect the power supply from any defective appliances.
Factory setting is (NC) Normally Closed
Guidelines for the electrician; Level of contamination 2; As per EN60730
When changing from normally closed to normally open, live components are exposed.
Therefore, disconnect the power when changing.
CAUTION! Do not use if cable is defective.
2023-03-23_TA2_Insins_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.co.uk www.ephcontrols.co.uk
TA230
1
3
5
4
2
Voltage
Running time
Stroke
Spring pressure
Power consumption
Inrush current
230 V~
3,5 min.
3,5 mm
125 N
2,5 W
<550 mA
for max. 100ms
24 V~
4,5 min.
3,5 mm
125 N
3 W
<300 mA
for max. 2min.
For use in normal environments.
Installation Instructions
Page 2 of 2
To reset to (NC) Normally Closed
To set to (NO) Normally Open
1
2
black
60 °
1
23
230V?
2mm
1
2
white
2
1
60°
1
23
230V?
1
2
3
TA2_ Thermal Actuator
2023-03-23_TA2_Insins_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.co.uk www.ephcontrols.co.uk
6
7
6.1
6.4
7.1 7.2 7.3 7.4
6.5 6.6
6.2 6.3
/