2. RAB
  3. A17
A17

RAB A17 Operating instructions

  • Hello! I've reviewed the instructions for the RAB A17 FA Slipfitter Mount Kit. This document provides a guide on how to install and adjust your area light. It also highlights key features such as the 90° angle adjustment and the use of a locking bolt. I'm ready to answer any questions you have about this product and the installation process.
  • What is the angle adjustment range?
    What components are included in the mount kit?
    What should I do before installing or maintaining the fixture?
INSTRUCTIONS
A17 FA AREA LIGHT
SLIPFITTER MOUNT KIT INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mar[email protected]
INSTALLATION
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining xture.
1. Feed Fixture wires through the Sliptter Bracket and secure in place with (4) Screws (provided) as shown in Fig. 1.
2. Continue wire feed through the Sliptter Mount and secure to the Sliptter Bracket with Locking Bolt as shown in Fig. 2.
3. To adjust Fixture angle, loosen Locking Bolt and set Fixture to desired angle.
4. Tighten the Locking Bolt to set angle.
Fig: 1 Fig: 2
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly - [email protected]
Free Lighting Layouts
Answered online or by request
© 2021 RAB LIGHTING Inc.
A17 FA Sliptter Mount Kit IN-0521
73720-RAB
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
Sliptter Bracket
Sliptter Mount
Locking Bolt
Fixture
Notice: 90° of angle adjustment.
Screws (4)
/