TownSteel CD-CDC Series User guide

Brand: TownSteel

Model: CD-CDC Series

Type: User guide

FL1

5. REMOVE INSIDE TRIM

6. ADJUST DOOR THICKNESS

Use lever catch tool to depress lever

catch visible under hole of inside lever

shank and slide off inside lever, rose

liner and mounting plate.

OUTSIDE LEVER ASSEMBLY

INSIDE MOUNTING PLATE

INSIDE ROSE LINER

INSIDE ROSE

INSIDE LEVER

ADJUST DOOR THICKNESS

LEVER

CATCH TOOL

TURN BUTTON

b. Depress lever catch with tool provided.

Push inside lever on completely until catch engages in lever.

Confirm lever is secured.

9. INSTALL INSIDE ROSE AND LEVER

8. INSTALL INSIDE MOUNTING PLATE

AND ROSE LINER

a. Install inside mounting plate to lock body.

b. Press inside rose liner onto mounting plate and tighten mounting

screws securely.

INSIDE

MOUNTING PLATE

INSIDE

ROSE LINER

MOUNTING SCREW

7. INSTALL OUTSIDE LEVER ASSEMBLY

Install outside lever assembly on the

door. Make sure tail of latch is engaging

with retractor correctly as illustrated.

LATCH

LOCK

BODY

ASSEMBLY

OUTSIDE LEVER ASSEMBLY

a. Be sure to fit rose in recess of rose liner.

INSIDE

ROSE

INSIDE LEVER

INSIDE ROSE

INSIDE

ROSE LINER

1-3/8" (35mm) 1-9/16"～1-3/4" (40～45mm)

2" (51mm)

TURN

BUTTON

PUSH

5/16"(8mm) x 2 hole

2-3/4"(70mm)

Std latch, drill 25.4mm (1")

Drive in latch, drill 24.5mm

(31/32") hole at center of

door edge

2" 1-3/4"

51 45

1-3/8"

1-9/16"

TEMPLATE

MARK CENTER OF

2-1/8"(54mm)

HOLE ON DOOR FACE

2-15/32"(62.7mm)

5/32"(4mm)

2-3/4" (70mm) BACKSET

2-3/8" (60mm) BACKSET

5" (127mm) BACKSET

FOLD HERE

ON DOOR EDGE

(FOR METAL DOOR ONLY)

NOTE

DO NOT MAKE THE HOLES FOR

LOCKS IF REMOVING OUTSIDE

SECURING STUDS (THRU-BOLT)

CATCH TOOL

OUTSIDE

MOUNTING PLATE

CATCH TOOL

LOCATION

1-3/4"

1-9/16"

1-3/8"

a. Remove outside mounting plate toward cylindrical case.

b. Put the catch tool into the allocated position of outside mounting

plate as the illustrating bellow.

c. Rotate outside mounting plate to required door thickness by

using a catch tool.

Align arrow mark to

be positioned in latch.

Adj.

TownSteel CD-CDC Series User guide

TownSteel CD-CDC Series User guide

TownSteel CD-CDC Series User guide

Other documents