ET2 E42080-90PC Installation guide

E42080-90PC
ET2
Brand
ET2
Model
E42080-90PC
Type
Installation guide

This manual is also suitable for

Install the Fixtures
1A
2
1Ensure that the electrical box is located behind the mirror location.
Using the paper template (provided) and a fixture; level, measure, and mark the location of mirror(s) and fixtures.
2
5
3
5
3
5
3
SINGLE MIRROR INSTALLATION
MULTIPLE MIRROR INSTALLATION
1
1 1
2
2
2
5
3
2
1
ELECTRICAL
BOX
PAPER TEMPLATE
36”
30”
PRODUCT NAME: LUMINANCE 30" X 36" MIRROR
ITEM NUMBER: E42084-90PC / E42086-90PC
Please consult your electrician for installing fixture and wiring.
5
3
1
1
1C
5
3
At a mounting hole location, push the anchor into the
wall up to the threads.
Screw the anchors in the rest of the way with a Phillips-
head screwdriver.
Repeat steps 4-5 for the other anchors and screw.
24
4
44
ANCHOR
4
25
26
5
3
1B
5
3
FIXTURE MOUNTING
Place the fixture on the marked location and mark the
location of the holes for the fixture
Note: Ensure that the mounting holes are located behind the
mirror
FIXTURE
23
SCREW
23
3
23
23
7
6
8
6
Install the Fixtures
1D
HOLES
2
35 6
9
5
3
5
3
MOUNTING PL A TE
Properly place the driver input wires, and wire nut
connections into the electrical box.
Feed the fixture wires through the mounting plate
center hole .
1G
2 Multiple mirror's driver installation
1E
2
7
5
3
8
5
3
Connect the white driver wire to the neutral power line.
Connect the black driver wire to the hot power line.
7
8
1F
5
3
5
3
3
5
3
5
3
5
10
11
11
11
11
11
11
11
SINGLE DRIVER
DRIVER #1 DRIVER #2
Wiring Driver & Fixtures
3
Connect the lead wire of fixture marked "+" to Led driver
output wire marked “+”with connector, and connect the lead
wire of fixture marked "-" to Led driver output wire marked
“-”with connector. Never connect the wire with "+" to wire
with "-”.
11
1H
12
5
3
5
3
MOUNTING PLATE
#8-32 SCREW
Properly place the wires and wire nut connections inside
the electrical box.
If necessary push any excess fixture wire into the
electrical box through the mounting plate.
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
13
14
Install the Mirror
2A
1
5
3
5
3
2B
22
3
2C
2D
2B
5
3
5
3
2 2
2
11
1
5
3
5
3
3 3
3
5
3
5
3
MIRROR
4
Drill holes for installation the bracket
Place the wall anchors into holes
Mount the bracket with screws
Hang the mirror onto bracket and secure the part
at the backside of bottom mirror with T screws
if needed.
Accessories bag include:
1) Wall anchors 7pcs
2) Wood screws 6pcs
3) T shape sccrew 1pc
4) Wire nut 4pcs
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

ET2 E42080-90PC Installation guide

E42080-90PC
ET2
Brand
ET2
Model
E42080-90PC
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents