ZK902A

Dongguan Zhike Intelligent Science Technology ZK902A User manual

  • Hello! I have reviewed the operation instructions for the Laser Sweeper Robot ZK902A. This document includes detailed information on the robot's features, such as its laser radar, dust box, water tank, and various sensors. I am ready to assist you with any questions you may have about its operation, maintenance, or troubleshooting, as described in the document.
  • What does the white power indication light mean?
    What does the breathing light flashing mean on the power button?
    What should I do if the red light is quick flashing?
    How often should I clean the filter?
LASER SWEEPER ROBOT
Operation Instructions
(Please read the instruction carefully before use and keep it well)
ModelZK902A
01
02 03
04 05
06 07
08 09
10 11
12 13
14 15
16 17
18
Content
Machine and accessories
Product introduction
Precautions before using
Product parameters
Voice prompts and trouble-shooting
FAQ
Safety information
01
02
08
Quick instruction 09
Product maintenance 11
13
14
16
17
01
02 03
04 05
06 07
08 09
10 11
12 13
14 15
16 17
18
Machine and accessories
The following product and accessories will be found after opening the package, please check carefully.
(The following pictures are for your reference, and they are subject to the actual product received)
*The accessories are already installed on the machine.
The accessories are optional for the customer.
Side brush Power adapter Instruction
High efficiency filterCharging standMachine
Water tank Mop component Single suction
port component
Instruction
Cleaning brush
Machine
Charging stand
High efficiency filter
Side brush
Power adapter
Dust box
Water tank Mop
Component
Single suction
port component
*
*
01
02 03
04 05
06 07
08 09
10 11
12 13
14 15
16 17
18
Product introduction
Keys on the machine
Power key:
Short press: Sweep/pause
Long press: On/off the machine
Color of power indication light:
White: Power ≥20%
White: Power ≥20%
Breathing light flashing: Charging
Red quick flashing: Faulty
WiFi indication light:
Slow flash: Waiting for connection
Normally on: WiFi is connected
Quick flash: WiFi connection failed
Recharge key:
Short press: recharge / pause
Long press: Timing cleaning
01
02 03
04 05
06 07
08 09
10 11
12 13
14 15
16 17
18
Product introduction
Front of machine Rear of machine
Laser radar
Radar collision
senso
Exhaust pot
Side brush
Side brush
Rolling brush
Rolling brush cover
Mop component
Mop buckle
Driving wheel
Universal wheel
Alignment sensor
Collision sensor
Infrared sensor
Collision buffer
Surface lid
Charging pole piece
Anti-dropping sensor
Please clean the sensors by mop to keep them clear always.
01
02 03
04 05
06 07
08 09
10 11
12 13
14 15
16 17
18
Product introduction
Machine Dust box
Dust box buckle
Cleaning brush
Machine cover
Reset key
Wall sensor
Filter bracket
High efficiency filter
Primary filter
01
02 03
04 05
06 07
08 09
10 11
12 13
14 15
16 17
18
Product introduction and usage
How to use the dust box and HEPA filter
Please clean thr filter regularly and replace it every 6 -12 months
to ensure the clean effect well.
1. Fetch out the dust box
Attentions Do not break off the snap lock of dust box
in cast of gracture.
4.Always clean the dust box and filter with a cleaning
brush, and wash the dust box and primary filter with water.
5. Assemble the dust box and filter into the robot after
completed dried.
2.Open the lid and empty the dust.
3.Open the filter holder on the dust box and fetch out
the HEPA filter.
01
02 03
04 05
06 07
08 09
10 11
12 13
14 15
16 17
18
Product introduction
Water tank
Suction port component
Mop component
Sealing plug
Water tank buckle
Charged pole piece
Buckle
Suction port
Fixed buckle
Water inlet for mop
Mop buckle
/