HDTV Supply KVM User guide

Brand: HDTV Supply

Model: KVM

Type: User guide

KVM Workstation Operation Guide

As long as the users have the KVM workstation setup in the system, it can support the KVM

workstation, below take example as a workstation with one monitor:

Triple press the “Ctrl” key, it will show the login interface, and login with the specific user name

and password:

After login, it will should be below interface, have the input sources preview on the top bar:

Operators can simply drag any sources down to the down section to view:

or just double click the sources to control it(* to control the sources will need to make sure it’s a

PC with the USB cable connected); And now operators can use the hot-key to switch the inputs

sources seamless to this monitor:

Double click the source 1(hot-key: Ctrl+1) Double click the source 2(hot-key: Ctrl+2)

Triple click “Alt” key to enter the Video Wall control:

Free window mode:

Full-screen on whole video wall mode:

Other functions on the other keys:

Esc: Exit the KVM or video wall mode(when show the preview bar on the top)

Home: Back to login interface

Input sources tab/mode:

Tab: select input signal groups

Up/Down: Select the current sources from the signal group(no cycling)

PGUP/PGDN: When signal above 1 page, to switch the signals

LEFT/RIGHT: Select the local workstation monitor(cycling)

F1~F8: Fast select the local workstation

Video Wall tab/mode:

UP/DOWM: select the video wall(no cycling)

PGUP/PGDN:When video wall above 1 page, to switch the video wall

LEFT/RIGHT: Select the local workstation monitor(cycling)

F1~F8: Fast select the local workstation

1
2
3
4

HDTV Supply KVM User guide

Brand: HDTV Supply

Model: KVM

Type: User guide

Other documents