2. Ralph Lauren
  3. RL 2280
RL 2280

Ralph Lauren RL 2280 User manual

  • Hello! I've reviewed the assembly instructions for the RALPH LAUREN Chandelier Sconce RL 2280. This document outlines the step-by-step process for installing this crystal-embellished light fixture, including mounting, wiring, and attaching the various crystal elements. I'm ready to answer any questions you might have about the assembly or safety procedures.
  • What should I do if I find any damage or defect during inspection?
    What type of wire connection is required?
    What are the cleaning instructions for this light fixture?
Alessandra Large Chandelier Sconce
Item # RL 2280
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box.
2. Remove the mounting plate (C) from fixture body (G) by loosening side
screws (B).
3. Affix mounting plate (C) onto the outlet box and secure with mounting
screws (D).
4. Attach the rubber washer (N), crystal disk (F) to the threaded
nipple (O) and secure with rubber washer (M), finial (L).
5. Attach the crystal disk (J) to the threaded nipple (K) and secure with
crystal column (I).
6. Remove the candle tube (Q), let the crystal disk (H) pass through the
socket, then put candle tube (Q) to the socket.
7. Connect the hot wire (smooth edge,markings) from the fixture to the
hot wire from the outlet box (usually BLACK). Fasten them together
with a plastic wire connector (A) provided and wrap the connection
with electrical tape.
8. Connect the neutral wire (ribbed, no markings) from the fixture to the
wire from the outlet box (usually WHITE).
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR
SAFETY WILL BE COMPROMISED.
9. Connect ground wire from the fixture (bare copper) to ground wire
from the outlet box (usually green or copper in color).
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.
10. Attach fixture body (G) onto the mounting plate (C) and secure with
side screws (B).
NOTICE:
US
M
L
I
D
S
E
T
Q
Outlet Box
AB
C
D
E
I
H
Blub
(Not included)
X
X
J
Z
K
O
N
F
L
M
X 24PCS Y 5PCS Z 3PCS
W 1PC
G
Y
W
E
Y
Z
X
W
X
Alessandra Large Chandelier Sconce
Item # RL 2280
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
11. Hang the crystal drop (E) to the finial (L).
12. Hang the crystal drops (X) to the crystal disk (H & J), then hang the
crystal drops (Y) to the crystal disk (F).
13. Put the flower drops (Z) to the center of the fixture body (G), then
hang the crystal drop (W) to the two arms.
14. Insert bulbs (not included) into the sockets.
15. Installation is complete, turn on power at fuse or circuit breaker.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not
use abrasive or chemical agents.
NOTICE:
US
M
L
I
D
S
E
T
Q
Outlet Box
AB
C
D
E
I
H
Blub
(Not included)
X
X
J
Z
K
O
N
F
L
M
X 24PCS Y 5PCS Z 3PCS
W 1PC
G
Y
W
E
Y
Z
X
W
X
/