American Standard 7381424-100.0070A Operating instructions

Brand: American Standard

Model: 7381424-100.0070A

Type: Operating instructions

American Standard 7381424-100.0070A is a silicone flapper seal designed to replace the original flapper assembly in your toilet tank. The silicone gasket is durable and easy to install, and it can help to prevent leaks and ensure a proper flush. The flapper seal is also adjustable, so you can customize it to fit your specific toilet tank.

Here are some of the benefits of using the American Standard 7381424-100.0070A silicone flapper seal:

Prevents leaks and ensures a proper flush
Durable and easy to install
Adjustable to fit your specific toilet tank
Helps to save water and money

Here are some of the benefits of using the American Standard 7381424-100.0070A silicone flapper seal:

Prevents leaks and ensures a proper flush
Durable and easy to install
Adjustable to fit your specific toilet tank
Helps to save water and money

Product names listed herein are trademarks of AS America Inc.

7302171-103

VORMAX

™

www.americanstandard-us.com/vormaxparts

Product names listed herein are trademarks of AS America Inc.

VORMAX

™

7302171-103

NUT &

GASKET

FIGURE 6

www.americanstandard-us.com/vormaxparts

SILICONE FLAPPER SEAL

PART NUMBERS:

7381424-100.0070A

TO REPLACE SILICONE SEAL:

• Turn off water supply; flush toilet

(remove all water from the tank)

• Remove hair pin FIGURE 1

• Remove clevis pin; this frees the teeter bar

from the trip lever arm FIGURE 1

• Place fingers underneath hinge and pull up to

release all 4 hinges FIGURE 2

• Remove original flapper assembly from tank

• Firmly grab silicone gasket and massage the tabs

from one side of the flapper while pulling away

from the plastic frame FIGURE 3

TO RE-ASSEMBLE:

• Push the tabs on the silicone flapper through

appropriate openings of flush valve frame FIGURE 3

• Place the black flapper to the black flush valve

body with the overflow tube and the red flapper

to the flush valve body with the red cap and

push all 4 hinges in place

(red to red/black to black)

• Insert the trip lever arm in to the yoke FIGURE 1

• Push the clevis pin through the arm FIGURE 1

• Insert the hair pin FIGURE 1

HAIR

CLEVIS

YOKE

➞

SILICONE

FLAPPER

FRAME

➞

SILICONE FLAPPER SEAL

PART NUMBERS:

7381424-100.0070A

COMPLETE BY AdjUSTING THE SETTINGS:

• Depress trip lever handle all the way (A)

• Adjust screw on the teeter bar (B) so rear frame (C)

touches the frame stop (d)

• Return trip lever handle (A) to rest position.

• Make sure hook (E) is fully engaged under tab on valve body (F),

if not, slightly adjust screw to make sure hook is engaged.

• Turn water supply on; adjust water level to specified dimension

on back of tank and flush 5 times to prime

(E)

(F)

(A)

(C)

(D)

(B)

HOOK

CROCHET

FIGURE 1

FIGURE 3

➡

PUSH

FIGURE 2

American Standard 7381424-100.0070A Operating instructions

Brand: American Standard

Model: 7381424-100.0070A

Type: Operating instructions

Here are some of the benefits of using the American Standard 7381424-100.0070A silicone flapper seal:

Prevents leaks and ensures a proper flush
Durable and easy to install
Adjustable to fit your specific toilet tank
Helps to save water and money

Download PDF

report

American Standard 7381424-100.0070A Operating instructions

American Standard 7381424-100.0070A Operating instructions

Related papers

Other documents