![](//vs1.manuzoid.com/store/data-gzf/2b829afbf0385cdba4cdbc0d6a4ba4b3/2/000637841.htmlex.zip/bg2.jpg)
Getting Started
General Tips
© ClosetMaid Corporation 2015| Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca
• Pleaserefertotheinstructionsheetprovidedintheproductpackageforthespecicsonrequired&
recommended tools and the assembling the products.
• Take an inventory of the parts for the products purchased to insure you have everything you need
for the installation.
• Pre-plan the placement of the towers.
• Assemble and build your towers.
• Placeyourtowers,makingsuretoafxthemtothewallasdirected.
•
• Measure the length that the rods will need to be for each side. Make sure that they span between
unitsorunitandwallisnotgreaterthan48in.Thetopshelvesandclosetrodstamaximumspan
of 48 in.
•
• Theexpandableclosetrodsare30in.to48in.long.Ifthelengthisshorterthan30in.therodwill
need to be cut.
• Installtheclosetrodsandtopshelves.
•
• Assemble and install any doors and drawers into the tower unit.
Parts List
3-Impressions
25”x10”DeluxeDrawerKit
1-Impressions
25”CustomClosetKit
3-Impressions
48”TopShelfKits