Getting Started
General Tips
© ClosetMaid Corporation 2017| Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca
• Pleaserefertotheinstructionsheetprovidedintheproductpackageforthespecicsonrequired&
recommended tools and the assembling the products.
• Take an inventory of the parts for the products purchased to insure you have everything you need
for the installation.
• Pre-plan the placement of the towers.
• Assemble and build your towers.
•
Placeyourtowers,makingsuretoaxthemtothewallasdirected.
• Measure the length that the rods will need to be for each side. Make sure that they span between
unitsorunitandwallisnotgreaterthan48in.Thetopshelvesandclosetrodstamaximumspan
of 48 in.
• Theexpandableclosetrodsare30in.to48in.long.Ifthelengthisshorterthan30in.therodwill
need to be cut.
• Installtheclosetrodsandtopshelves.
• Assemble and install any doors and drawers into the tower unit.
Parts List
3-Impressions
25”x10”StandardDrawerKit
1-Impressions
5’-10’StandardClosetKit
3-Impressions
TopShelfKits