LG AXSVB2 Owner's manual

Brand: LG

Model: AXSVB2

Type: Owner's manual

LG AXSVB2 through-the-wall air conditioner sleeve is designed to provide a secure and weatherproof installation for your air conditioning unit. It is crafted from durable materials to withstand the elements and ensure longevity.

The sleeve is compatible with both expanded and louvered grille designs, allowing you to customize the look of your installation to match your home's exterior. It features a compact design that fits snugly within the wall opening, minimizing air leakage and maximizing energy efficiency.

The installation process is straightforward and can be completed with basic tools. The sleeve comes with detailed instructions and all the necessary hardware for a secure fit. Once installed, the sleeve provides a stable platform for your air conditioner, reducing vibration and noise during operation.

How to assemble the folding sleeve

THROUGH - THE - WALL AIR CONDITIONER

SLEEVE INSTALLATION INSTRUCTIONS

SLEEVE HARDWARE

• TTW Sleeve with Expanded Grille: AXSVB1

• TTW Sleeve with Louvered Grille : AXSVB2

INSTALL THE UNIT

ITEM

➀

➁

➂

➃

➄

➅

DESCRIPTION

SLEEVE LOWER

SLEEVE UPPER

COVER PANEL

REAR GRILLE

WASHER SCREW

SCREW

Q’TY

➀

➁

➃

➂

3828A20209B

WASHER

SCREW

EXPANDED

REAR GRILLE

LOUVERED

REAR GRILLE (OPTION)

Minimum

SLEEVE

LINTEL

(PURCHASED LOCALLY)

(MORTAR)

INSTALLATION OF SLEEVE

INTO PRE-CAST CONCRETE

OR MASONRY WALL

INSIDE OUTSIDE

•Remove the old air conditioner from the existing

wall sleeve and remove the existing wall sleeve.

•Prepare and install the new wall sleeve into the wall

opening.

•The wall sleeve must be fastened in the wall

securely before installing the new air conditioner.

•Keep the cover panels for later use to protect the

unit from rainy or windy weather.

•Receptacle should be installed within 20" of left

side or 45" of right side of wall opening.

• To avoid distortion to plastic air conditioner front,

install sleeve 4" minimum distance from heating

source. (e.g. Baseboard heating, radiator, etc.)

• After sleeve has been installed, caulk where

necessary entire perimeter around exterior wall

opening and sleeve. Use a good grade of caulking

compound to seal all cracks against air and water

infiltration.

• Do not remove front or back cover until all masonry

is set and window frame is in place. this will prevent

buckling of the during sebseqent construction

operatins. the rear gille and washer screws should

be kept well until the air conditioneris installed.

25-

"(656mm)

16-

"(425mm)

15-

(394mm)

4" Minimum

SLEEVE DIMENSION

SLEEVE INSTALLATION

ELECTRICAL WALL

RECEPTACLE

16-

MASONRY OPENING

FRAME OPENING

26-

" 45"20"

WALL

OPENING

WALL OPENING

•Insert the rear grille and fasten the 8 washer screws

 as shown below.

INSTALL THE COVER PANEL

PANEL COVER - BACK

ASSEMBLE THE WALL SLEEVE

•Raise the sleeve side panels to upright position as

 shown below.

•Place sleeve upper on top of side panels.

•Fasten the four screws as shown below.

•To install cover panel to back of sleeve, first

remove air conditioner from sleeve.

•Remove the 2 sleeve upper and 2 sleeve lower

washer screwsholding the rear grille in place as

shown below.

•From the inside of the sleeve, insert cover panel

against rear grille.

•Re-insert the sleeve upper and sleeve lower

screws through panel and grille and tighten in

place.

•Re-insert air conditioner into sleeve.

•If desired, use the other panel to cover the front of

the sleeve. Fasten with 4 washer screws.

PANEL COVER - FRONT

How to assemble the folding sleeve

THROUGH - THE - WALL AIR CONDITIONER

SLEEVE INSTALLATION INSTRUCTIONS

3828A20209B

LG AXSVB2 Owner's manual

LG AXSVB2 Owner's manual

Related papers

Other documents