406568B
Replace short bolts with long ones
provided in kit.
Torque to 190-220 in-lb (21.5-24.9 N•M)
Replace o-ring if applicable
Place small o-ring in groove on
the extension
Orient this side down
NOTE:
To ensure proper sealing, always
replace o-rings when pump is disassembled.
234019/819.0229 Aluminum
Diaphragm Pump Extension Kit
For 2 in. NPT or 50.8 mm BSPT ported aluminum pumps only.
Extends the outlet manifold to match the inlet-to-outlet distance
of a Wilden or ARO aluminum pump.
Read warnings and instructions.
Refer to manual 308368 or 819.4273.
-
1
