Edlund 625 APP Datasheet

Edlund
Brand
Edlund
Model
625 APP
Type
Datasheet

This manual is also suitable for

Edlund 625 APP NC is a crown punch can opening system without a compressor, specifically designed for secure operation within correctional facilities with an existing air supply. It has a fully enclosed compartment, wash down to IP-65 standard, quick-change tooling to accommodate different can sizes, and can open up to 10 cans per minute with one operator.

Edlund 625 APP NC is a crown punch can opening system without a compressor, specifically designed for secure operation within correctional facilities with an existing air supply. It has a fully enclosed compartment, wash down to IP-65 standard, quick-change tooling to accommodate different can sizes, and can open up to 10 cans per minute with one operator.

625 APP Correctional Facility Can Opening System
•
Built-in compressor
•
Two lockable, programmable counters
for accurate lid-to-can verification
•
Reinforced, welded walls and doors,
plus integral padlock latches
•
Power lock-out key to prevent access
to lid-counters and can-counters
•
Quick-change tooling to accommodate
different can sizes*
•
Ability to open up to 10 cans per minute
with one operator
•
Heavy duty stainless steel construction
with tamperproof hardware
•
Lockable and height-adjustable casters
Guard against missing can lids and costly lockdowns, with the first and only air-powered can opening system designed
specifically for correctional facilities. Constructed of heavy duty stainless steel with tamperproof hardware, the 625 APP features
a new, enclosed crown punch design and automatic lid-collecting system that makes it virtually impossible for prisoners to steal
dangerous pieces of metal. Plus, at up to 10 cans per minute, it opens up a whole new level of efficiency for many facilities.
FEATURES:
The 625 APP can be customized to fit any correctional facility’s specific security needs.
Originally designed and built for
Rikers Island, NYC DOC, one of the
largest security facilities in the USA
ADDITIONAL FEATURES INCLUDE:
WARRANTY INFORMATION: THE EDLUND COMPANY WARRANTS THESE PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. THE COMPANY’S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WITHOUT CHARGE ANY PART OR PARTS FOUND TO BE DEFECTIVE
UNDER NORMAL USE. IT IS THE RESPONSIBILITY OF THE PURCHASER TO RETURN THE ENTIRE UNIT TO THE FACTORY, TRANSPORTATION CHARGES PREPAID. THIS WARRANTY DOES NOT COVER PARTS THAT MUST BE REPLACED UNDER NORMAL USE. NO OTHER WARRANTY, WRITTEN OR VERBAL, IS AUTHORIZED BY THE COMPANY. WARRANTY INFORMATION OUTSIDE THE
UNITED STATES MAY VARY; CONSULT YOUR DISTRIBUTOR.
11/07 ED01-4480
MODEL # DESCRIPTION DIMENSIONS AIR CONSUMPTION PRODUCT CASE CUBE CASE WEIGHT
CODE FT3/M3 LBS/KGS
625 APP
Crown punch can opening system with built-in compressor, specifically 30 in x 45 in x 59 in 2 CFM (56.6 Liters/m) 62781 77/2.18 590/267.62
designed for secure operation within correctional facilities (76 cm x 114 cm x 150 cm) @ 85 PSI (5.95 kg/cm)
625 APP NC
Crown punch can opening system without a compressor, specifically 30 in x 45 in x 59 in 2 CFM (56.6 Liters/m) 62782 77/2.18 550/249.48
designed for secure operation within correctional facilities with an (76 cm x 114 cm x 150 cm) @ 85 PSI (5.95 kg/cm)
existing air supply
SPECIFICATIONS:
Edlund Company, Inc., 159 Industrial Parkway, Burlington, VT 05401, USA 800-772-2126 www.edlundco.com
We’re in your kitchen.
™
Put a lid on loss. Take the security risk out of
opening cans, with a can opening system you can count on.
•
Fully enclosed compartment with a
built-in compressor
•
Wash down to IP-65 standard
•
Quick-change tooling to accommodate
different can sizes*
•
Ability to open up to 10 cans per
minute with one operator
•
Heavy duty stainless steel construction
with tamperproof hardware
•
Programmable relay counter
•
Lockable and height-adjustable casters
•
Made in U.S.A.
*Short cans require custom tooling.
Power lock-out key prevents unauthorized
changes to lid-counter and can-counter settings
Reinforced, welded walls and doors, plus
integral padlock latches securely protect the
compressor and lid compartment
Air-powered, two-handed operation
for added safety and security
Two lockable, programmable counters
for accurate lid-to-can verification
Open shelf design unit available without
compressor for facilities with an existing air supply
625 APP NC
  • Page 1 1
  • Page 2 2

Edlund 625 APP Datasheet

Edlund
Brand
Edlund
Model
625 APP
Type
Datasheet
This manual is also suitable for

Edlund 625 APP NC is a crown punch can opening system without a compressor, specifically designed for secure operation within correctional facilities with an existing air supply. It has a fully enclosed compartment, wash down to IP-65 standard, quick-change tooling to accommodate different can sizes, and can open up to 10 cans per minute with one operator.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents