Finisar OADMF-4-1-LC Datasheet

Finisar
Brand
Finisar
Model
OADMF-4-1-LC
Type
Datasheet

This manual is also suitable for

Finisar OADMF-4-1-LC is a 4-wavelength add/drop multiplexer designed for metro access applications. It enables the user to add or drop four specific CWDM wavelengths (1471nm, 1511nm, 1551nm, and 1591nm) from network traffic while passing the other channels unaffected. This device is ideal for use in ring networks and can be easily scaled to meet changing network requirements. With its low optical insertion loss, high directivity, and low passband ripple, the OADMF-4-1-LC ensures reliable and efficient optical signal transmission.

Finisar OADMF-4-1-LC is a 4-wavelength add/drop multiplexer designed for metro access applications. It enables the user to add or drop four specific CWDM wavelengths (1471nm, 1511nm, 1551nm, and 1591nm) from network traffic while passing the other channels unaffected. This device is ideal for use in ring networks and can be easily scaled to meet changing network requirements. With its low optical insertion loss, high directivity, and low passband ripple, the OADMF-4-1-LC ensures reliable and efficient optical signal transmission.

F i n i s a r
Features:
• Low Optical
Insertion Loss
• Cost-effective CWDM
technology
• Adds/drops four
Wavelengths
OADM-4 Optibox Module
Specifications
Mechanical
Dimensions:
5.5" x 3.2" x 0.5",
139mm x 81mm x 13mm
Connectors:
• SC or LC connectors
Optical
Center Wavelengths:
(2 versions):
• SC or LC connectors
for interfacing
• Reliable passive
WDM optical
technology
• Scales easily for ring
networks
• Low-profile modular
design
● Compliance with
RoHS
CWDM OADM-4
Optibox Module
The Finisar OADM-4 optibox module is a passive optical add/drop multiplexer
designed for metro access applications that represents the state of the art in fiber
optics design. The OADM-4
optibox module adds/drops four wavelength CWDM
channels from network traffic and passes the other channels. Finisar's unique
CWDM design maps the channel into separate two-fiber paths, going in opposite
directions into the network (East/West).
Added/dropped channels are interfaced to any of Finisar's CWDM transceivers on
the equipment side. A grid of eight CWDM wavelengths is available from Finisar.
The Finisar OADM-4 optibox module delivers dramatic cost savings to network
equipment manufacturers, enabling them to develop metro access systems that are
lower in cost, easier to provision and simpler to operate.
OADM-4-1 Optibox
Finisar Shanghai Inc.
No. 66 Huiqing Rd., East Zhangjiang Hi-Tech Park, Shanghai,
China 201201
Main: +86-21-38559200 Fax: +86-21-68919894
Website: www.finisar.com
Finisar Corporation
1308 Moffett Park Drive, Sunnyvale, CA 94089-1133, USA
Main: (408) 548-1000 Fax: (408)543-0083
Email: [email protected] Website: www.finisar.com
Jan. 09 Rev. C
• 1471 nm
• 1511 nm
• 1551 nm
• 1591 nm
OADM-4-2 Optibox
• 1491 nm
• 1531 nm
• 1571 nm
• 1611 nm
Directivity:
≥ 55 dB
Return Loss:
≥ 45 dB
Passband Ripple:
≤ 0.5dB
PDL:
≤ 0.15dB
PMD:
≤ 0.2ps
Environmental:
•Operating 0 to 70
o
C,
•Relative humidity:
10 to 85%,
non-condensing
•Storage - 40 to 85
o
C
F i n i s a r
OADM-4 Optibox Module Parameter Specifications
Max Insertion Loss (dB) Min Isolation (dB)
Passband
Add Drop Pass Add Drop Pass
+/- 6.5nm 2.30 2.30 2.15 30 50 14
Note: Connector loss included.
Dimensions (Unit: inch)
5.512
3.155
12.0-14.0
OADM-4
.118
2.939
5.296
The number fibers shown are for exam
p
le
A
ll Measurements are in inches.
0.500
Ordering Information
Part Number Description
OADMF-4-1-xx 4 Wavelength Add/Drop (1471nm, 1511nm, 1551nm, 1591nm)
OADMF-4-2-xx 4 Wavelength Add/Drop (1471nm, 1511nm, 1551nm, 1591nm)
XX = LC - LC connectors
SC - SC connectors
Finisar Shanghai Inc.
No. 66 Huiqing Rd., East Zhangjiang Hi-Tech Park, Shanghai,
China 201201
Main: +86-21-38559200 Fax: +86-21-68919894
Website: www.finisar.com
Finisar Corporation
1308 Moffett Park Drive, Sunnyvale, CA 94089-1133, USA
Main: (408) 548-1000 Fax: (408)543-0083
Email: [email protected] Website: www.finisar.com
Jan. 09 Rev. C
  • Page 1 1
  • Page 2 2

Finisar OADMF-4-1-LC Datasheet

Finisar
Brand
Finisar
Model
OADMF-4-1-LC
Type
Datasheet
This manual is also suitable for

Finisar OADMF-4-1-LC is a 4-wavelength add/drop multiplexer designed for metro access applications. It enables the user to add or drop four specific CWDM wavelengths (1471nm, 1511nm, 1551nm, and 1591nm) from network traffic while passing the other channels unaffected. This device is ideal for use in ring networks and can be easily scaled to meet changing network requirements. With its low optical insertion loss, high directivity, and low passband ripple, the OADMF-4-1-LC ensures reliable and efficient optical signal transmission.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents