DELTA DORE CS 8000 TYXAL+ Installation guide

DELTA DORE
Brand
DELTA DORE
Model
CS 8000 TYXAL+
Type
Installation guide

This manual is also suitable for

1. Associate the video function with the system
Step 1: Install and activate the TYDOM 2.0
(see user guide)
Step 2: Associate the TYDOM 2.0 with the system
Ê Enter the installer code (123456, by default) and confirm with OK.
Ë Press Settings, select the menu:
Installation > Products, then confirm with OK.
Ì Select "Add", then confirm with OK.
The alarm control unit's red LED switches on.
Í Briefly press the T1 button of the TYDOM 2.0
The TYDOM 2.0 emits a beep when the T1 button is pressed,
then a second beep to confirm the association.
The alarm control unit beeps to confirm the association.
The associated product is displayed on the CLT 8000 (e.g. TY2 0 06 06).
You can now configure and personalise the TYDOM 2.0
from the CLT 8000 TYXAL+ touch screen keypad.
Step 3: Associate the DMBV TYXAL+ to the system
Ê Enter the installer code (123456, by default) and confirm with OK.
Ë Press Settings, select the menu:
Installation > Products, then confirm with OK.
Ì Select "Add", then confirm with OK.
The alarm control unit's red LED switches on.
• The alarm control unit must be in maintenance mode.
• The alarm control unit must have a CLT 8000 TYXAL+ touch screen keypad
associated to programme the mobile phone numbers (SMS).
• To associate the products with the system, they must be in their definitive
location (EN 50131).
Maintenance
mode
Maintenance
mode
ADDITION - Video function
The video function of the alarm system is provided by an infrared motion detector and DMBV TYXAL+ video associated
with a TYDOM 2.0 transmitter. These 2 products must also be associated with the system.
If an intruder is detected, an alarm is triggered and takes a 5-second video. A link to play this video is automatically
sent by SMS to the number or numbers programmed in the CLT 8000 TYXAL+ touch screen keypad.
Téléchargement
Programmation
Codes d'accès
Version logicielle
Réglages
Horloge
Langues
Ok
Retour
Installation
Installation
Zones
Carillon
Test
Initialisation
Ok
Produits
Retour
Ajouter
du produit
Appuyer sur la touche
Retour
Produits
Supprimer
Ok
Activer/désactiver
Paramétrer
Retour
Ajouter
Code d'accès
XXXXXX
Ok
SOS
1
2
3
25/11/14 12:48
SOS
Réglages
OFF
Saisir votre code
Info
Réglages
Ma maison
OFF
25/11/14 12:48
Téléchargement
Programmation
Codes d'accès
Version logicielle
Réglages
Horloge
Langues
Ok
Retour
Installation
Installation
Zones
Carillon
Test
Initialisation
Ok
Produits
Retour
Ajouter
du produit
Appuyer sur la touche
Retour
Produits
Supprimer
Ok
Activer/désactiver
Paramétrer
Retour
Ajouter
Code d'accès
XXXXXX
Ok
SOS
1
2
3
4
TYDOM 2
TY2 0 06 06
Paramétrer
Ajouté
Retour
25/11/14 12:48
SOS
Réglages
OFF
Saisir votre code
Info
Réglages
Ma maison
OFF
25/11/14 12:48
T1
Í Briefl y press the product button.
The LED fl ashes when the button is pressed, then fl ashes again to confi rm the
association (the association phase can last up to 12 seconds).
The alarm control unit beeps. The TYDOM 2.0 beeps.
The associated product is displayed on the CLT 8000 (example: DMV 0 07 02).
2. Confi gure the video function
By referring to the relevant chapters ("Call numbers" and "Entry timer on
intrusion detectors"), you can:
• Programme the SMS telephone numbers to call in case of detection. All the
numbers declared in SMS receive the link to play the video.
• Choose the detector triggering mode (immediate or delayed).
In the case of a delayed triggering of the DMBV, the video will be recorded as
soon as an intrusion is detected, but will only be transmitted if it is confi rmed.
3. Test the video function
3.1 Local test
Ê Enter the installer code (123456, by default) and confi rm with OK.
Ë Press Settings, select the menu:
Installation > Test, then confi rm with OK.
Ì Select the type of product to test: Detector, and confi rm with OK.
Í Press the button of the TYXAL+ DMBV detector twice and
wait for 3 to 4 seconds.
Î The LED is on and steady for 5 seconds. The detector fi lms.
Ï The LED fl ashes for 20 to 30 seconds.
The detector transfers the video to the TYDOM 2.0 transmitter.
Ð The LED is on and steady for 3 seconds. The transfer is over.
Ñ An SMS is sent to the programmed number or numbers within
10 seconds.
Î An SMS is sent within 10 seconds to the programmed number or
numbers.
3.2 Test under operating conditions
Refer to the "Test the installation - Test the motion detectors" chapter.
For this test, the Tydom 2.0 must be installed and connected to the GSM
network.
Installation
Initialisation
Ok
Carillon
Retour
Test
Réglages
Horloge
Langues
Ok
Retour
Installation
Code d'accès
XXXXXX
Ok
SOS
1
2
3
4
Test
Ok
Retour
Avertisseur
Détecteur
Test détecteur
Appuyer sur la touche du
produit
Retour
25/11/14 12:48
SOS
Réglages
OFF
Saisir votre code
Info
Réglages
Ma maison
OFF
25/11/14 12:48
x 2
3 sec.
3 sec.
5 sec.
20 sec.
10 sec.
1
2
abc
3
def
4
ghi
5
6
mno
7
pqrs
8
tuv
9
wxyz
Annuler
Entrer
0
PIN
4
7
8
5
6
  • Page 1 1
  • Page 2 2

DELTA DORE CS 8000 TYXAL+ Installation guide

DELTA DORE
Brand
DELTA DORE
Model
CS 8000 TYXAL+
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents