Ferm ETM1003 User manual

www.ferm.com

EN

DE

NL

FR

ES

PT

IT

SV

FI

NO

DA

HU

CS

SK

SL

PL

Eredeti használati utasítás fordítása 42

 

 

 

 

 

 





 

 

 

 

 

 

 

 

etm1003

Page is loading ...

EN

3

STAPLER/NAILER



By doing so you now have an excellent product,

delivered by one of Europeís leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive Warranty.

We hope you will enjoy using this product for

many years to come.

The numbers in the text refer to the diagrams

on pages 2-3.

Read the operating instructions

carefully before using this device.

Familiarize yourself with its functions

and basic operation. Service the device

as per the instructions to ensure that it

always functions properly. The

operating instructions and the

accompanying documentation must be

kept in the vicinity of the device.



The tacker enables you to fasten various

materials, such as fabric, wood, gauze, cardboard

and leather. Therefore, the tool is suitable to

upholster furniture, to wrap objects or to repair

shoes.

Contents

1. Machine data

2. Safety instructions

3, Use

4, Maintenance





Voltage 220-240V~

Frequency 50 Hz

Number of staples 20/min.

Max. staple depth 14 mm

Max. nail depth 15 mm

Weight ca. 0.9 kg

Lpa (sound pressure) 77.6+3 dB(A)

Lwa (sound power) 90.6+3 dB(A)

Vibration value 2.476+1,5 m/s

2



The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in

EN 60745; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

signifi cantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns



1 Tacker

400 staples

100 nails

1 Manual

1 Guarantee card



Fig. 1

1 Safety catch

2 Slide

3 Cartridge haft

4 Switch

5. On/off switch





Denotes risk of personal injury, loss of

life or damage to the tool in case of non-

observance of the instructions in this

manual.

Indicates the presence of an electrical

voltage.

Wear eye protection.



√

EN

4

 Always assume that the tool contains

fasteners. Careless handling of the tacker can

result in unexpected firing of fasteners and

personal injury.

 Do not point the tool towards yourself or

anyone nearby. Unexpected triggering will

discharge the fastener causing an injury.

 Do not actuate the tool unless the tool is

placed firmly against the workpiece. If the tool

is not in contact with the workpiece, the

fastener may be deflected away from your

target.

 Disconnect the tool from the power source

when the fastener jams in the tool. While

removing a jammed fastener, the tacker may

be accidentally activated if it is plugged in.

 Do not use this tacker for fastening electrical

cables. It is not designed for electric cable

installation and may damage the insulation of

electric cables thereby causing electric shock

or fire hazards.

Before using the tacker

 Check the following points:

• Do the voltage of the engine and the

engine safe-guard, if any, correspond to

the mains voltage (appliances for a mains

voltage of 220-240 V);

• Are the mains lead and the mains plug in

a good condition: solid, without any loose

ends or damage.

 Always wear eye protection when using the

tool.

 Maintain the tool with care.

 Check for misalignment or binding of moving

parts, breakage of parts, and any other

condition that may affect the tools operation. If

damaged, have the tool serviced before

using.

 Check if the slide cartridge has been fastened

properly.

 Do not use the tool in a humid environment.

 Do not use the tool on materials containing

asbestos.



 Do not use the tool if the switch does not turn

it “ON” or “OFF”.

 Always hold the tool with two hands while

starting.

 Always keep the cord away from the moving

parts of the machine.

 Keep your hands away from the work piece.

 In the case of jamming by a nail or staple,

switch the machine off immediately and

remove the plug from the mains.

 Never aim the tool at people or animals.

 Use only staples or nails fit for this tool.

 Make sure not to damage any leads when

using the tool.





When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double

insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

2

. When using a cable

reel always unwind the reel completely.





Fig. 2

For this tool, use one of the following types

staples or nails:

 U: 6, 8, 10, 12, 13 or 14 mm

 T: 15 mm

 I: 15 mm

Suitable staples and nails are provided by:



Rapid: R11, R54, R14, R34, R114, R64

Piranha: 5, 13

Novus

www.servotool.eu



EN

5

Before opening the tool, make sure the

tool is disconnected.



Fig. 3 - 5

Unlocking slide

 Press the slide unlock (2) on both sides to

unlock the slide.

Placing staples

 Pull the slide out of the machine

 Place the staples or nails in the cartridge

Placing nails

 Push the slide back in the machine.

 Lock the slide by sliding the slide forward until

it locks into place.

Using the tacker

 Press the On/Off switch (5) to switch the

machine on

 Press the On/Off switch (5) to switch the

machine off.

Placing the tool

 Place the tool at the spot where the staple or

nail should be located.

 Press the tool down firmly.

Pressing safety catch

 Press the safety catch to the side to unlock

the safety.

Stapling

 Press the switch.

 When the work is completed, slide the safety

catch to the other side to lock the safety back

on.

The tool will cause a re bound because of

the force it operates with. Keep this in

mind.



Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.



Should the machine fail to function correctly, a

number of possible causes and the appropriate

solutions are given below:

 In case a staple or nail is jammed in the tool,

follow the procedure below

• Disconnect the tool.

• Carefully remove the staple or nail from

the tool with a thin object (for example a

knife).

Repairs and servicing should only be

carried out by a qualified technician or

service firm.



Regularly clean the device’s casing with a soft

cloth, preferably after each use. Keep the fan slits

free of dust and dirt. Remove stubborn dirt using

a soft cloth, dampened with soapy water. Do not

use solvents such as benzene, alcohol, ammonia,

etc., which might damage the plastic parts.



If a defect appears due to a part wearing out,

please contact the service center on the warranty

card. At the end of these instructions there is

an exhaustive overview of the parts that can be

ordered.



To prevent damage during transport, the

appliance is delivered in a solid packaging which

consists largely of reusable material. Therefore

please make use of options for recycling the

packaging.

Damaged and/or disposed of electrical or

electronic devices must be dropped off at

recycling stations intended for that

purpose.



Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/EU for Waste Electrical and Electronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

Page is loading ...

1504-08

Ferm ETM1003 User manual

Ferm ETM1003 User manual

in other languages

Related papers

Other documents