Jason.L QCW1207.W.WT Operating instructions

Brand
Jason.L
Model
QCW1207.W.WT
Type
Operating instructions
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
Page 1 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
Table top x1
Leg Quadro A (Half leg) x2
Leg wood add on x4
Leg bottom beam
Upper beam x1
Lower beam x1
Plastic bracket x4
Wheels x4
A
B
C
D
E
F
G
H
Allen key x2P
M8x20MM CSK x8
M8x20MM socket head x2
M6x20MM socket head x4
M6x30MM socket head x4
Pins x2
Corner pads x4
Mushroom head M6x30 x4
I
J
K
L
M
N
O
COMPONENTS
SCREWS
Page 2 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
E
G
H
A
B
C
D
I J K L M
N
O
Page 3 of 10
Insert the Leg wood add on (C) into the
Leg Quadro A (Half leg) (B). Using Allen Key
provided, attach mushroom head screw
(O) for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
Need help!
Call us on
1300 527 665
www.jasonl.com.au
B
C
STEP 01
B
O
Page 4 of 10
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 02
Now use corner pads (N) to cover the holes
where just inserted the head screw sockets.
Insert the Leg bottom beam (D) into the Leg wood add on (C),
using Pins (M) provided. Attach on each leg.
M
D
C
N
B
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
H
J
K
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
STEP 01
Using Allen Key provided, attach 2 plastic brackets per leg (G) (as per picture
above) using M6x20MM (K) Socket head screw. Screw the wheels (H) to the
bottom of each Leg wood add on (C).
STEP 02
Page 5 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
TOP VIEW
B
C
D
G
Using Allen Key provided, attach M8x20MM Socket head (J)-
screw socket half way into leg for both legs
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
Page 6 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
E
STEP 03
Adjust extendable beam (E) to desired
length using markers and secure beam
at that length using screws provided
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
F
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
STEP 04
Adjust extendable beams (F) to desired length.
Remove plastic inserts
Loosen 2 bolts on beam using allen key
Extent lower beam to the same distance as upper beam
Insert plastic inserts back into the beam
Page 7 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
2
2
2
4
1
1
1
3
3
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
STEP 05
TOP VIEW
STEP 06
Page 8 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
I
E
I
Attach Upper Beam (E) to legs using nut insert.
See point attached
Frame looks like this. Using Allen Key, attach Upper Beam (E)
with Sockets (I).
I
I
Frame looks like this. Using Allen Key. Tighen Sockets (I) on the Lower Beam
(F) using Allen Key (O). Insert plastic spacers to improve regidity. Attach two
Sockets (I) to the side of the lower side beams (as shown in the picture).
STEP 07
F
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
Page 9 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
I
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Mobile Counter Table
STEP 08
Page 10 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
L
TABLE TOP
BOTTOM VIEW
nut insertnut insert
Place desktop ontop of frame - with cutout at the back of the desk.
Nut inserts in top will align with plastic joiner brackets using M6x30MM
(L) sockets attached top to frame.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Jason.L QCW1207.W.WT Operating instructions

Brand
Jason.L
Model
QCW1207.W.WT
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents