2. Baxton Studio
  3. BBT5281-Gravel/Walnut-5PC Dining Set

Baxton Studio BBT5281-Gravel/Walnut-5PC Dining Set, BBT5281-Dark Grey/Walnut-5PC Dining Set, BBT5281-Greyish Beige/Walnut-5PC Dining Set Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BBT5281 Arm Chair. This document provides detailed steps, parts lists, and hardware information to help you assemble your chair. I understand the importance of proper assembly, and I'm here to assist you with any questions you might have about the process or the components. Let me know how I can help!
  • What tools are needed for assembly?
    Should I fully tighten the bolts right away?
    What should I do to prevent damage to the threads?
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 50mm 4 PCS
2 WOOD SCREW M4 x 38mm 4 PCS
3 WOOD DOWEL M10 x 40mm 8 PCS
4 M4 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5281 ARM CHAIR PAGE 1 OF 2
STEP A STEP B
x2
STEP 1 STEP 2
PART LIST
ITEM DESCRIPTION QTY
A CHAIR 1 PC
B LEG (L) 1 PC
C LEG (R) 1 PC
D SUPPORT RAIL (LONG) 1 PC
E SUPPORT RAIL (SHORT) 1 PC
E
D
C
E
D
1
4
3
LONG
SHORT
R
ASSEMBLY INSTRUCTIONS PAGE 2 OF 2
STEP A
STEP B x2
x4
STEP 3 STEP 4
STEP 5
B
2
A2
4
1
Note : Follow the line drawing
to assemble the chair leg.
L
L
R
PART LIST
ITEM DESCRIPTION QTY
A TABLE TOP 1 PC
B LEGS 4 PCS
ASSEMBLY INSTRUCTIONS PART LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 60mm 8 PCS
2 M6 FLAT WASHER 8 PCS
3 M6 SPRING WASHER 8 PCS
4 M4 ALLEN KEY 1 PC
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 2
A
B
2
3
1
4
/