Hexin Technology HXSP-2108A User manual

Brand: Hexin Technology

Model: HXSP-2108A

Category: Serial converters/repeaters/isolators

Type: User manual

Hexin Technology HXSP-2108A is a converter that changes RS-232 signals to RS-485 signals. It has a strong drive capability and can drive up to 64 devices on the bus. The communication distance is up to 1000 meters. It is designed to be easy to connect and use. It is widely used in industrial monitoring, civilian PTZ monitoring, industrial control equipment, and other fields.

The HXSP-2108A has the following features:

Standard: Accord EIA RS-232, RS-485 standard
Connector: DB9 female on RS-232 side, 3 terminal block on RS-485 side
Optical isolation voltage: 2.5kv pulse/500v continuous

Hexin Technology HXSP-2108A is a converter that changes RS-232 signals to RS-485 signals. It has a strong drive capability and can drive up to 64 devices on the bus. The communication distance is up to 1000 meters. It is designed to be easy to connect and use. It is widely used in industrial monitoring, civilian PTZ monitoring, industrial control equipment, and other fields.

The HXSP-2108A has the following features:

Standard: Accord EIA RS-232, RS-485 standard
Connector: DB9 female on RS-232 side, 3 terminal block on RS-485 side
Optical isolation voltage: 2.5kv pulse/500v continuous

Http://www.hexin-technology.com/

HXSP-2108A Optical Isolation

RS-232 to RS-485 Converter

User Manual

Product introduction

HXSP-2108A converter is the communication converter

which change RS-232 signal to RS-485 signal completely

isolate. It has the strong drive capability which can drive

max to 64 devices on the bus. The communication

distance max up to 1000 meters. It is designed elegantly,

easy to connect wire, convenient to use. It is widely use d

in industrial monitoring, civilian PTZ monitoring, and

industrial control equipment, and other field s

Product Feature

1.Standard: Accord EIA RS-232, RS-485 standard.

2.Connector: DB9 female on RS-232 side, 3 terminal block on

RS-485 side.

3.Optical isolation voltage: 2.5kv pulse/500v continuous

4.Work methods: asynchronous, point to point or multi-point, 2

wire half-duplex.

5.Transmission medium: Ordinary Line , twisted pair cable or

Shielded Wire

6.Baud rate: 300~115000bps.

7.Transmission distance:1km (9600bps)

8.Power Supply: 12VDC/mA.

9.Dimension : 53mm x 80mm x 20mm

Wiring diagram:

Http://www.hexin-technology.com/

There are two connection methods:

Two HXSP-485 converters connect:

HXSP-485 …………………………………HXSP-485

Data (＋) …………………………………Data (＋)

Data (－) …………………………………Data (－)

GND …………………………………GND

HXSP-485 connect with RS-485 equipment

HXSP-485………………………………… RS-485 equipment

Data (＋)………………………………… …T+/R+ or 485+

Data (－)………………………………… …T-/R- or 485-

Problem analysis：

1. Data communication unsuccessful

A. Check RS-232 interfaces whether to be correct;

B. Check RS-485 interfaces whether to be correct;

C. Check whether RS-232 signal level（TXD、DTR、RTS）lower than＋5V, if that,

it can get through power from 6 th pin of DB9 Male.

2. Data missing or messy code

A. Check whether the baud rate and format of both sides of data communication

equipment are same.

B. If possible, add the matched resistance on the terminal circuit (120 Ω,1/4 w)

1
2

Hexin Technology HXSP-2108A User manual

Brand: Hexin Technology

Model: HXSP-2108A

Category: Serial converters/repeaters/isolators

Type: User manual

Hexin Technology HXSP-2108A is a converter that changes RS-232 signals to RS-485 signals. It has a strong drive capability and can drive up to 64 devices on the bus. The communication distance is up to 1000 meters. It is designed to be easy to connect and use. It is widely used in industrial monitoring, civilian PTZ monitoring, industrial control equipment, and other fields.

The HXSP-2108A has the following features:

Standard: Accord EIA RS-232, RS-485 standard
Connector: DB9 female on RS-232 side, 3 terminal block on RS-485 side
Optical isolation voltage: 2.5kv pulse/500v continuous

Download PDF

Related papers

Other documents