Classic Accessories Cumberland Inflatable Fishing Float Tube Owner's manual

  • Hello! I've analyzed the provided specification document for the Float Tube All. It outlines the critical dimensions and tolerances for the product when fully inflated. I am ready to answer any questions you may have regarding the specifications and features presented in the document.
  • What is the overall length (A) of the float tube?
    What is the tube circumference at the center back (D)?
    What is the height from the bottom of the tube to the seat bottom (F)?
Cumberland Float Tube
11/17/2008 Page 3 of 28
Part #
32-001-011101-00
32-031-011103-11
32-001-011101-KR
Critical Dimensions
Model A B C D E F
All 56.00 44.00 19.00 19.25 42.50 4.50
A. Overall length
B. Overall width at front
C. Height at center back
D. Tube circumference at CB
E. Tube circumference at front of
pocket
F. Height from bottom of tube to
seat bottom (inated tube)
NOTE: Measure-
ments taken on a
fully inated oat
tube
Plus/Minus Tolerances
0 - 12”
13 - 24”
25 - 48”
49” and over
+/- 0.125” max
+/- 0.25” max
+/- 0.50” max
+/- 0.75” max
Please Note:
All Dimensions
are In Inches
Unless Noted
Otherwise
F
B
C
A
E
D
Revised 05/20/09
/