2. Computers & electronics
  3. TVs & monitors
  4. Flat panel desk mounts
  5. J.Burrows
  6. JBPDMARMWE

J.Burrows JBPDMARMWE, JBPDMARMBK Assembly Instructions Manual

  • Hello! I've reviewed the assembly instructions for the J.Burrows monitor arm models JBPDMARMWE and JBPDMARMBK. This document provides detailed steps for mounting, adjusting, and managing cables with this single monitor arm. I'm ready to answer any questions you have about setting up your monitor with this device.
  • What desk thickness is compatible with the clamp version?
    What size hole is required for the grommet version?
    What weight of monitor can this arm support?
PROFESSIONAL SINGLE MONITOR ARM
JBPDMARMWE
JBPDMARMBK
1CTN
1/12
arm
Toolsrequiredforassembly
using
authorised
Officeworks Ltd
2/12
PARTS LIST
1
1pc
2
1pc
34
1pc 1pc
56
1pc 1pc
7
1pc
1pc
1pc
8
910
1pc
3/12
HARDWARELIST
A
8pcs M4*12mm screw
B C D
E F
1pc M6 Box wrench
G
8pcs M5*12mm screw 3pcs M6*12mm screw 16pcs Ø6.5*Ø13*2 washer
1pc 4X4 Allen key 1pc 5x5 Allen key
INSTALLATION DIAGRAM
1
4
3
2
5
1
6
7
8
9
10
4
Option A: Clamp version, go to step 1 Option B: Grommet version, go to step 4
4/12
STEP1
F
1pcs 4X4 Allen key
C
3pcs M6*12mm screw
1
3
2
C
C
C
5/12
Option A: Clamp
Select position
according to
thickness of the desk
6/12
5
STEP2
STEP3
For desk thickness:
25-100mm
3
4
Tighten
1
7
8
C
STEP4
Option B: Grommet
STEP5
X
F
C
5
7/12
1pcs 4X4 Allen key
3pcs M6*12mm screw
STEP6
STEP7
8/12
9
10
11
Available hole size:
8.5-25mm
For desk thickness:
25-100mm
100
75
100
75
Compatible with the monitor hole distance
75x75 or
100x100
VESA ON MONITOR
75x75 or
100x100
Tighten
STEP8
9/12
Attaching the monitor to the plate
3
21
A or B
A or B
D
A or B
D
G
G
1pc 5x5 Allen key
D
16pcs Ø6.5*Ø13*2 washer
A
8pcs M4*12mm screw
B
8pcs M5*12mm screw
STEP9 Adjust the monitor G
1pc 5x5 Allen key
E
1pc M6 Box wrench
G
10/12
E
G
Use Allen Key (G) to adjust the swivel
function
Remove the plastic cover, use Box
wrench (E) to adjust the tilt function
If the monitor cannot stop at any
height, use 5x5 allen key(G)to
adjust the screw on the arm.
Adjust the screw in “-“ direction
when the monitor is up
and “+” direction when it is down.
Factory setting: 4-5KG
STEP10
11/12
Cable
Using cord management
CAUTION: This product is intended to hold the maximum weight indicated.
Exceeding the maximum weight will result in instability and may cause injury.
Please retain your receipt to validate warranty. If you’d like to know more about
Officeworks’ furniture products, please visit our website. www.officeworks.com.au
10"~30"
75x75
100x100 2-9kg
-85
15
12/12
/