Parallax Ag9050 Quick start guide

Parallax
Brand
Parallax
Model
Ag9050
Type
Quick start guide

Parallax Ag9050 is a Power over Ethernet Module designed to work with the WIZnet W5200 Ethernet board. It allows you to power and communicate with your W5200 board over a single Ethernet cable, as long as your network supports Power over Ethernet (PoE).

The Ag9050 provides a regulated 5V output, which can power your QuickStart board and other peripherals. It also features overload and short-circuit protection, and has an industrial operating temperature range of -40 to +185 °F (-40 to +85 °C).

Some possible applications for the Ag9050 include:

Remote IP based security systems IP based home automation

Parallax Ag9050 is a Power over Ethernet Module designed to work with the WIZnet W5200 Ethernet board. It allows you to power and communicate with your W5200 board over a single Ethernet cable, as long as your network supports Power over Ethernet (PoE).

The Ag9050 provides a regulated 5V output, which can power your QuickStart board and other peripherals. It also features overload and short-circuit protection, and has an industrial operating temperature range of -40 to +185 °F (-40 to +85 °C).

Some possible applications for the Ag9050 include:

Remote IP based security systems IP based home automation

Web Site: www.parallax.com
Forums: forums.parallax.com
Sales: sales@parallax.com
Technical: support@parallax.com
Office: (916) 624-8333
Fax: (916) 624-8003
Sales: (888) 512-1024
Tech Support: (888) 997-8267
Ag9050 Power over Ethernet Module (#40012)
The Ag9050 Power over Ethernet Module is designed to be a drop-in Power over Ethernet (PoE) solution
for the WIZnet W5200 Ethernet Board. As long as your network supports power over Ethernet the
W5200 + QuickStart board can both be powered and communicate.
Features
Power over Ethernet for your WIZnet W5200 Board and P8X32A Propeller QuickStart Board
Regulated 5 V output powers your QuickStart Board and other peripherals
Overload and short-circuit protection
Industrial operating temperature range
Key Specifications
Power Requirements: Power Sourcing Equipment (PSE) or Midspan Equipment
Power Output: 9 watt max power output (5 V @ 1.8 A)
Communication Interface: Complies with IEEE 802.3af
Operating temperature: -40 to +185 °F (-40 to +85 °C)
Dimensions: 3.0 x 2.0 in (7.62 x 5.08 cm)
Application Ideas
Remote IP based security system
IP based home automation
Long distance tethered robotics
Additional Items Required
Power Sourcing Equipment (PSE)
or Midspan Equipment
WIZnet W5200 Board (#40002)
P8X32A Propeller QuickStart
(#40000)
Soldering iron
Solder
Safety glasses
Copyright © Parallax Inc. Ag9050 Power over Ethernet Module (#40012) v1.0 8/6/2013 Page 1 of 3
Assembly Instructions
1. Make sure your QuickStart + W5200 boards have been safely powered down and carefully
separated. Set the QuickStart board aside.
2. Carefully insert the Ag9050 Power over Ethernet module from the top down so that the module’s
large transformer is facing outward. The module is pin-keyed, so you cannot insert the module
backwards.
3. Use your soldering iron to solder the Ag9050 module into place from the underside of the W5200
module. Apply solder to all of the module’s pins. Make sure there are no accidental solder
bridges.
4. Check that your board setup looks like this when you’re done soldering.
Ag9050 PoE Module installed into the W5200’s PoE header.
Copyright © Parallax Inc. Ag9050 Power over Ethernet Module (#40012) v1.0 8/6/2013 Page 2 of 3
5. Reattach your QuickStart Board and any other peripherals you may have added.
6. Connect an Ethernet cable to the W5200. The Ag9050 PoE module should automatically
negotiate with Power Sourcing Equipment and begin supplying power to the QuickStart board.
Resources and Downloads
Check for the latest version of this document and datasheets from the Ag9050 Power over Ethernet
Module product page. Go to www.parallax.com and search 40012.
Revision History
Version 1.0 – Original Document
Copyright © Parallax Inc. Ag9050 Power over Ethernet Module (#40012) v1.0 8/6/2013 Page 3 of 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

Parallax Ag9050 Quick start guide

Parallax
Brand
Parallax
Model
Ag9050
Type
Quick start guide

Parallax Ag9050 is a Power over Ethernet Module designed to work with the WIZnet W5200 Ethernet board. It allows you to power and communicate with your W5200 board over a single Ethernet cable, as long as your network supports Power over Ethernet (PoE).

The Ag9050 provides a regulated 5V output, which can power your QuickStart board and other peripherals. It also features overload and short-circuit protection, and has an industrial operating temperature range of -40 to +185 °F (-40 to +85 °C).

Some possible applications for the Ag9050 include:

Remote IP based security systems IP based home automation

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents