Mountain Buggy Haven with safeguard Instructions Manual

Brand: Mountain Buggy

Model: Haven with safeguard

Category: Baby carriers

Type: Instructions Manual

This manual is also suitable for

Buggy Range Outside Cover

Mountain Buggy Haven with safeguard is suitable for children from 9 to 36 kg and is used forward-facing.

The seat has several adjustment options to ensure a comfortable and safe fit for your child. The backrest can be adjusted to two different angles, and the headrest can be adjusted in height to accommodate your child's growth. The seat also has a base angle adjustment that can be used to provide additional support for younger children.

The Haven with safeguard is equipped with ISOFIT connectors, which make it easy to install in your vehicle. The connectors simply click into place, and the seat can be easily removed when not in use.

Mountain Buggy Haven with safeguard is suitable for children from 9 to 36 kg and is used forward-facing.

The Haven with safeguard is equipped with ISOFIT connectors, which make it easy to install in your vehicle. The connectors simply click into place, and the seat can be easily removed when not in use.

READ

KEEP FOR FUTURE REFERENCE

FOR YOUR CHILD'S SAFETY

THESE INSTRUCTIONS

BEFORE USE

CAREFULLY

haven

™

with safeguard

™

Group 1, 2, 3

Suitable for Children

9 – 36kg

Please register your product purchase through our online warranty

registration by visiting: www.mountainbuggy.com/register

For rights & remedies, refer www.mountainbuggy.com/warranty

The haven

™

with safeguard

™

complies with requirements

applicable in market of sale

mountainbuggy.com

Congratulations on choosing

your new car seat!

Product Care

Safety Warnings

Features

Instructions

Product care

CLEANING & CARING

Check your car seat for cuts & bruises. If your product

is damaged in any way, or you’re not sure how to use

it, please consult our web support from where you can

access a local customer care team.

Caring for your car seat

Unlike children, your car seat likes to stay clean.

Cleaning the fabric cover:

• Read the label on the removable cover for washing

instructions.

• Hand wash in warm water only.

• DO NOT tumble dry.

• The fabric cover can be easily removed for washing.

1. Remove the cover and machine wash it at 30ºC; line

dry only.

2. To replace the cover follow the instructions above

in reverse.

GENERAL INSTRUCTIONS

Group 1, 2, 3

Suitable for children 9 to 36kg.

THIS DOCUMENT CONTAINS

IMPORTANT INFORMATION AND MUST

BE KEPT WITH THE SEAT FOR FUTURE

REFERENCE.

This product should be used forward

facing until the child is too large for the

seat or exceeds 36kgs.

This product should never be used

rearward facing.

Product care

IMPORTANT

Cleaning the seat:

• Sponge clean only. Use hand soap and warm water.

• DO NOT use solvents, detergents or washing up

liquids as these may weaken the seat.

• DO NOT lubricate or oil any part of the seat.

• DO NOT wring.

• Dry thoroughly before storage.

• Store in a well ventilated space, away from direct

sunlight which could damage or fade your product.

• Store in a safe place when it is not being used.

Avoid placing heavy objects on top of it.

• DO NOT allow to come into contact with corrosive

substances e.g. battery acid.

The correct use and maintenance of your car seat

will ensure it gives long and trouble free use. When

somebody else is using your car seat, ensure that

they also know how to use it and especially the

correct way to adjust it. The safety of your child is your

responsibility.

Please read thoroughly before commencing

installation as an incorrect installation could be

dangerous.

• Only suitable for use in vehicles ﬁtted with a

three-point seat belt approved under UN/ECE 16

or equivalent standard.

• The category of this child restraint system is

“SEMI-UNIVERSAL” and it is suitable for

installation in the vehicles and in the seat

positions indicated in the vehicle list on

mountainbuggy.com.

• Other vehicles and seat positions may also be

suitable for this restraint system.

• If in doubt, consult the manufacturer, retailer or

certiﬁed installer.

If your vehicle is ﬁtted with ISOFIT fastening points

the seat can be ﬁtted using its ISOFIT connectors.

CONSULT THE INSTRUCTION MANUAL FOR YOUR

VEHICLE TO LOCATE THE FASTENING POINTS OF

THE ISOFIT SYSTEM. IF IN DOUBT, CONSULT YOUR

CAR DEALERSHIP.

Safety Warnings

WARNINGS

• PLEASE READ ALL INSTRUCTIONS IN

THIS MANUAL AND IN THE VEHICLE

OWNER’S MANUAL RELATED TO CAR

SEATS CAREFULLY AND UNDERSTAND

THEM. INSTALL AND USE THE CAR SEAT AS

DESCRIBED IN THE INSTRUCTION MANUAL.

FAILURE TO DO THIS COULD RESULT IN

SERIOUS INJURY OR DEATH OF YOUR

CHILD.

• Do not remove any labels on the car seat.

Important information is contained on the

labels.

• Do not use a car seat that has been in a

crash. A crash can cause damage to the

car seat that you cannot see.

• Do not replace the car seat cover with any

other than the ones we recommend as

these parts are integral to the car seat’s

performance.

• Do not use a second-hand car seat or

car seat whose history you do not know.

The rigid items and plastic parts of a child

restraint must be so located and installed

that they are not liable, during everyday

use of the vehicle to become trapped by a

movable seat or in a door of the vehicle.

• Do not use on the vehicle seats that face

the sides or rear of the vehicle. Use the

car seat only on the vehicle seats that face

forward.

• Do not use in any conﬁguration not shown

in the instructions.

• Never use this car seat with 2 point vehicle

belts.

• Do not use a car seat with damaged or

missing parts.

• Do not modify or attempt to modify the car

seat in any way.

• Do not take apart or attempt to take apart

Safety Warnings

this car seat except as instructed in this

manual.

• Do not use belt routing methods not shown

in these instructions.

• Do not use any load bearing contact

points other than those described in the

instructions and marked on the child

restraint.

• Do not allow children to play with or adjust

the car seat.

• Do not use this car seat in a passenger

seat with an active airbag unless the

vehicle manufacturer conﬁrms that it is

safe.

• This child restraint should be securely

belted in the vehicle even when not in use.

In a crash or sudden stop, an unsecured

car seat may injure other occupants. Make

sure to properly secure any loose objects,

such as luggage or books, in your car as

they may cause injuries in the event of an

accident.

• Never leave your child unattended in a car

even for a short time.

• Never take your child out of the car seat

when the vehicle is moving.

• This car seat is designed to be used only

in vehicles; do not use outside of vehicles.

Never use this car seat without the child

safety seat cover.

• Hot! Cover the car seat when left in direct

sunlight. Parts of a car seat may become

too hot for the child's skin. Always check

surfaces before placing a child in the car

seat.

• Any straps holding the restraint to the

vehicle should be tight, that device

restraining the child should be adjusted to

the child's body, and that straps should not

Safety Warnings

be twisted; ensuring that any lap strap is

worn low down, so that the pelvis is ﬁrmly

engaged.

• Don’t let the adult safety-belt buckle

interfere with the main load bearing

contact points on the car seat. Please

contact the car seat manufacturer if in

doubt about this point.

Safety Warnings

Do not use on

a passenger

seat with a

front airbag.

On outer rear seat

YES

On a rearward-facing seat

On seats facing sidewards

On rear seat with lapbelt only

Front seat with airbag off

On centre rear seat with

3-point belt

Safety Warnings

CHECKLIST BEFORE USE

Haven with Safeguard (9–18kg child)

Inspect

• Child restraint free of damage

Verify Child within Size Range

• Weight: between 9kg and 18kg

Install Child Restraint Forward-Facing in Safe

Location in Vehicle

• Vehicle seats that face front of vehicle only

• Child facing front of vehicle

• Compatible vehicle seat belts

• Belt path followed

• Tight against vehicle seat

Haven without Safeguard (15–36kg child)

Inspect

• Child restraint free of damage

Verify Child within Size Range

• Weight: between 15kg and 36kg

• Height: eyes below top of backrest

Install Child Restraint Forward-Facing in Safe

Location in Vehicle

• Vehicle seats that face front of vehicle only

• Child facing front of vehicle

• Compatible vehicle seat belts

• Belt path followed

• Tight against vehicle seat

Secure Child Properly in Booster

• Correct vehicle belt ﬁt (across shoulder and lap)

• Vehicle seat belt not twisted

• Vehicle lap belt under arm rests

• Vehicle shoulder belt under arm rest and passes

through shoulder belt guide

Features

01 Headrest

02 Shoulder Belt Guide

03 Protection Flank

04 Belt Guide

05 FIX Connector

06 FIX Adjustment Button

07 Seat

08 Safeguard

09 ISOFIT guider sleeve

Features

10 Backrest Adjust Button

11 Belt Guide

12 Backrest Cover

13 Backrest Angle Supporting stop

14 Belt Guide

15 Base Adjustor

Instructions

ADJUSTING BACKREST AND HEADREST

Backrest Angle Adjustment

There are 2 positions for the Backrest.

1. Push outwards the Adjustment Stops on the two

sides and the backrest can be adjusted into Upright

Position.

2. Push inwards the Adjustment Stops on the two

sides and the backrest can be adjusted into Recline

Position.

NOTICE:

Please conﬁrm the position of the Adjustment Stops

on the two sides before use. Please Do NOT use the

car seat when the position of the adjustment stops are

inconsistent.

Instructions

Base Supporting Angle Adjustment

While used as group 1, the car seat Base Adjustor can

be pulled out to adjust the base angle.

WARNING:

The car seat Base Adjustor is only used for group 1

(from 9–18kg).

Please do not pull out the Base Adjustor for group 2

and 3 (from 15–36kg).

Adjusting Backrest Height

Hold the Release Handle on the back of the backrest

and push/pull up and down at the same time to adjust

the height of the backrest. (The Protection Flanks will

open automatically when adjust the backrest height to

ﬁt the body of the baby.)

NOTICE:

Please adjust the car seat Backrest height according to

the height of the baby to make the Headrest height and

Protection Flank width suitable to protect the baby.

Instructions

ISOFIT instruction

Note:

Please install the ISOFIT guider sleeve onto the ISOFIT

anchorage (1) when connect the ISOFIT connector to

the anchorages which is between the vehicle seat

surface and the vehicle back. See diagrams:

Instructions

Child Restraint with Safeguard (9-18kg Child)

WARNING:

In order to use the restraint as group 1 (from 9 to 18

kg) it should be used along with the safeguard.

The car seat MUST be used with a 3 point vehicle seat

belt when used as a child restraint with

safeguard.

Pinch the FIX

Adjustment Buttons

on the two sides and

push out the legs.

Pull the car seat

outwards to ensure

the FIX Connectors

are locked well.

Push the car seat backwards till the car seat

backrest is against the vehicle seat backrest.

Instructions

Put the baby into the car seat and insert the safeguard in the front.

Meanwhile, pull the vehicle belt latch plate, route the vehicle shoulder and

lap belt through the belt guides on the two sides of the safeguard and lock

the vehicle belt latch plate into the belt buckle on the other side. Settle and

tighten the vehicle belt.

WARNING:

Check and ensure the FIX Connectors on the two sides has been locked cor-

rectly. Check and ensure the safeguard has been installed into the car seat

correctly and restrainted by the 3 point Vehicle Belt.

How to take the child out of the restraint

• Unfasten the vehicle seat belt, and open the safeguard.

• Take the child out of the restraint system.

• Fit the safeguard again and fasten the seat belt.

WARNING: Safeguard should always be secured in vehicle when not in use.

Removing the restraint from the car (group 1)

• Unfasten the vehicle seat belt.

• Pass the seat belt through the guides on the safeguard and

remove it.

• Pinch the FIX Release Buttons on the two sides to release the

FIX Connectors.

• Take the restraint oﬀ the vehicle seat.

Instructions

Child Restraint without Safeguard (15-36kg Child)

The child seat MUST be used with a 3 point vehicle

seat belt when used as a booster. Safeguard will need

to be removed.

Put the car seat on the vehicle seat, align it with the

ISOFIT interface in the vehicle seat and push forward.

“Click” will be heard when the FIX Connectors are

locked.

Instructions

WARNING

• Make sure the lap section of the vehicle

belt rests as low as possible over the child's

hips and that the shoulder section of the

vehicle belt is positioned over the centre of

the child's shoulder.

• Veriﬁy that the vehicle buckle does not

interfere with the armrest or side of the

booster seat. If it does, move the car seat

to another vehicle seating position.

• Do not route the vehicle belt using any

other path when using this car seat. For

assistance contact your retailer or Mountain

Buggy.

• Do not use 2 point vehicle belts to install

this car seat.

• Only install this car seat on forward-facing

vehicle seats.

1. Put the child seat on a forward-facing vehicle seat

(5a).

2. Have the child sit on the booster seat so their back

contacts the backrest from shoulders to bottom. (5c)

3. Adjust the headrest to ﬁt the child. so the vehicle

belt passes over the center of the child’s shoulder.

(5b)

4. Position the vehicle belt over the child. Make sure

the vehicle lap belt passes under both armrests of the

booster seat, and the vehicle shoulder belt passes

under the armrest on the side where the seat belt is

buckled and through the upper belt guide. Check that

the vehicle belt is not twisted and then buckle it. (5c)

Page is loading ...

Mountain Buggy Haven with safeguard Instructions Manual

Brand: Mountain Buggy

Model: Haven with safeguard

Category: Baby carriers

Type: Instructions Manual

This manual is also suitable for

Buggy Range Outside Cover

Mountain Buggy Haven with safeguard is suitable for children from 9 to 36 kg and is used forward-facing.

The Haven with safeguard is equipped with ISOFIT connectors, which make it easy to install in your vehicle. The connectors simply click into place, and the seat can be easily removed when not in use.

Download PDF

report

Mountain Buggy Haven with safeguard Instructions Manual

This manual is also suitable for

Mountain Buggy Haven with safeguard Instructions Manual

Related papers

Other documents