iogear GUS402 Quick start guide

Type
Quick start guide

This manual is also suitable for

iogear GUS402 is a peripheral sharing switch that allows you to connect up to 4 USB devices to 2 computers and easily switch between them with the press of a button. It supports a wide range of devices such as printers, scanners, hard drives, and other USB 2.0 compatible devices.

iogear GUS402 is a peripheral sharing switch that allows you to connect up to 4 USB devices to 2 computers and easily switch between them with the press of a button. It supports a wide range of devices such as printers, scanners, hard drives, and other USB 2.0 compatible devices.

4x2 / 4x4 USB 2.0 Peripheral Sharing Switch
Quick Start Guide
GUS402 / GUS404
PART NO. Q1221-c
www.iogear.com
1
Package Contents
System Requirements
GUS402
1 4x2 USB 2.0 Peripheral Sharing Switch
1 Quick Start Guide
1 Warranty Card
GUS404
1 4x4 USB 2.0 Peripheral Sharing Switch
1 Quick Start Guide
1 Warranty Card
For PC Users
• Windows
®
XP, Windows Vista
®
, Windows
®
7, and Windows
®
8,
Windows
®
10
Available USB 2.0 port
For MAC Users
• Mac 8.6 or greater. Requires OS X for USB 2.0 support
Available USB 2.0 port
1 2
2
Overview
GUS402
1. PC Port 1 / 2
2. PC Indicator LEDs
3. USB 2.0 Device Ports
4. Optional Mini USB Power Input
5. Console Selection Button
2
1
3
4
5
GUS404
1. PC Port 1 / 3
2. PC Port 2 / 4
3. Console Indicator LEDs
4. USB 2.0 Device Ports
5. Optional Mini USB Power Input
6. Console Selection Button
4
1
2
3
56
1 2
3
Hardware Installation
Step 1
Plug your USB 2.0 compatible devices into the ports on the front
of the unit.
Step 2
Plug the console USB cables into at USB2.0 compatible port on
each computer.
Note: The GUS402/GUS404 are hot-swappable and do not require the
computers to be turned off during connection, or when attaching devices
to the USB ports.
2
1
Operation
FCC Statement
4
Connected Devices
The GUS402 and GUS404 allow a single keyboard, mouse, printer,
USB compatible monitor, hard disk drive, or other USB 2.0 device to
be shared by multiple computers. To share a non-USB monitor,
IOGEAR offers adapters (sold separately) enabling VGA, DVI or
HDMI monitors to be connected to a USB 2.0 port. The following part
numbers are available at www.iogear.com and other retail locations:
Switching between computers
Press the Console Selection Button to switch the USB ports
connection to the next computer in sequence. The Console Indicator
LEDs will light to indicate which computer is connected.
GUC2015V
GUC2020DW6
GUC2025H
for VGA monitors
for DVI monitors
for HDMI monitors
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential setting. This product generates, uses, and
can radiate radio frequency energy and, if not installed and used as
directed, it may cause harmful interference to radio communications.
Although this product complies with the limits for a Class B digital
device, there is no guarantee that interference will not occur in a
particular installation.
CE Compliance
This device has been tested and found to comply with the following
European Union directives: Electromagnetic Capability (2004/108/EC),
Low Voltage (2006/95/EC) and R&TTED (1999/5/EC).
Warranty Information
This product carries a 3 Year Limited Warranty. For the terms and
conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
Limited Warranty
Contact
WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP
THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
15365 Barranca Parkway, Irvine 92618
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

iogear GUS402 Quick start guide

Type
Quick start guide
This manual is also suitable for

iogear GUS402 is a peripheral sharing switch that allows you to connect up to 4 USB devices to 2 computers and easily switch between them with the press of a button. It supports a wide range of devices such as printers, scanners, hard drives, and other USB 2.0 compatible devices.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents