Promaster 3 in 1 Cool Light Owner's manual

Cool Light 3 in 1 Lighting System

Instruction Manual

Patent No.:200920037761.9

Please note that the hood comes attachment rods. One end

of each rod should be place in the rod pocket of the hood.

Spread out the hood by opening the velcro and put the light

body in the opening. Make sure the light stand bracket is

facing to you.

Insert the other end of each of the rods into the mounting

holes indicated with a triangle symbol around the perimeter

of the light body. This forms the shape of thereflector hood.

Insert 4 fluorescent photo lamps into the base. (Maximum of

85 watts per lamp)

To use as a softbox, stretch the softbox diffuser over the

outer rim of the hood and affix to the velcro strips.

CoolLight 3 in 1 Instruction Manual

Specifications:

Power Input : AC100-130V, 60Hz or

AC200-240V, 50Hz

Light Holders : Four

Max.Light Power : 65watt  4 fluorescent (not included)

Bulb Base : E27 screw

(1) Power cable (2) Fuse

(3) On/Off power switch-1 (4) On/Off power switch-2

(5) Umbrella Holder (6) Lamp Holder4

(7) Lamp angle adjustment (8) Stand Mounting Bolt

(9) Mounting hole for softbox rods (8 holes)

1.Diffuser

2.Light Body

3.Hood

This manual is also suitable for

Download PDF