72-5602
72-5602
72-5602
72-5602
72-5602
72-5602
72-5602
72-5602
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
2010-up
Ford/Mazda speaker
connector
2010-up
Ford/Mazda speaker
connector
2010-up
Ford/Mazda speaker
connector
2010-up
Ford/Mazda speaker
connector
2010-up
Ford/Mazda speaker
connector
2010-up
Ford/Mazda speaker
connector
2010-up
Ford/Mazda speaker
connector
2010-up
Ford/Mazda speaker
connector
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
Rev. 11-27-13
Rev. 11-27-13
Rev. 11-27-13
Rev. 11-27-13
Rev. 11-27-13
Rev. 11-27-13
Rev. 11-27-13
Rev. 11-27-13
INST72-5602
INST72-5602
INST72-5602
INST72-5602
INST72-5602
INST72-5602
INST72-5602
INST72-5602
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
There are four wires in this plug. The factory
tweeter wiring is included. The factory tweeter is
protected with a capacitor. If you intend to retain
the factory tweeter, connect solid white wires
together and connect to the positive terminal of
the replacement speaker. Connect white/ black
wires together and connect to the negative
terminal on the replacement speaker.
New speaker (-)
New speaker (-)
New speaker (-)
New speaker (-)
New speaker (-)
New speaker (-)
New speaker (-)
New speaker (-)
New speaker (+)
New speaker (+)
New speaker (+)
New speaker (+)
New speaker (+)
New speaker (+)
New speaker (+)
New speaker (+)
Factory tweeter (-)
Factory tweeter (-)
Factory tweeter (-)
Factory tweeter (-)
Factory tweeter (-)
Factory tweeter (-)
Factory tweeter (-)
Factory tweeter (-)
Factory tweeter (+)
Factory tweeter (+)
Factory tweeter (+)
Factory tweeter (+)
Factory tweeter (+)
Factory tweeter (+)
Factory tweeter (+)
Factory tweeter (+)
/
