American Standard 4101.001 User manual

American Standard
Brand
American Standard
Model
4101.001
Category
Faucets
Type
User manual

This manual is also suitable for

A21
© 2008 AS America Inc.
ARCH™
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
MODEL NUMBER:
4101.100 Kitchen Faucet with Pull-out Spray Spout
Escutcheon plate (installation is optional).
SUGGESTED SPECIFICATION:
Single control kitchen faucet shall feature swivel pull-out spray with toggle button activation, metal escutcheon plate and metal
lever handle. Shall also feature washerless ceramic disc valve cartridge, flexible hose supplies and two integral check valves.
Fitting shall be American Standard Model # 4101.001.___ .
GENERAL DESCRIPTION:
Metal swivel spout. Metal escutcheon plate and metal lever
handle. Pull-out spray with adjustable spray pattern and
toggle button activation. Hose is (1250mm (48") long.
Washerless 40mm ceramic disc valve cartridge. Braided
flexible supply hoses with 3/8" compression connections.
Brass mounting shank with brass fixation ring. 2.2
gpm/8.3L/min. maximum flow rate. Can be mounted with or
without supplied escutcheon plate (escutcheon size 10-5/16"L
x 2-5/16"W).
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Memory Position Valving: Allows user to turn valve on and
off at preferred temperature setting without readjusting handle
position each time.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Integral Check Valves:
Prevents back flow.
Pull-out Spray: With toggle button activation. Switches water
flow from stream to spray.
Choice of Finishes: Available in Polished Chrome or
Stainless Steel (PVD) finishes.
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING HOLE
533mm
(21)
53.8mm
(2-3/16)
149.4mm
(5-7/8)
242.4mm
(9-9/16)
287.5mm
(11-5/16)
58.2mm
(2-5/16)
261.4mm
(10-5/16 )
253.7mm
(10 )
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
Pull-out kitchen faucet
Product
Number
Description
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
4101.100
Optional Soap Dish. Can be mounted anywhere on counter.
(hardware provided)
4101.115
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
A22
© 2008 AS America Inc.
MODEL NUMBER:
4101.100 Kitchen Faucet with Pull-out Spray Spout
Escutcheon plate (installation is optional).
SUGGESTED SPECIFICATION:
Single control kitchen faucet shall feature swivel pull-out spray with toggle button activation, metal escutcheon plate and metal
lever handle. Shall also feature washerless ceramic disc valve cartridge, flexible hose supplies and two integral check valves.
Fitting shall be American Standard Model # 4101.001.___ .
GENERAL DESCRIPTION:
Metal swivel spout. Metal escutcheon plate and metal lever
handle. Pull-out spray with adjustable spray pattern and
toggle button activation. Hose is (1250mm (48") long.
Washerless 40mm ceramic disc valve cartridge. Braided
flexible supply hoses with 3/8" compression connections.
Brass mounting shank with brass fixation ring. 2.2
gpm/8.3L/min. maximum flow rate. Can be mounted with or
without supplied escutcheon plate (escutcheon size 10-5/16"L
x 2-5/16"W).
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Memory Position Valving: Allows user to turn valve on and
off at preferred temperature setting without readjusting handle
position each time.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Integral Check Valves:
Prevents back flow.
Pull-out Spray: With toggle button activation. Switches water
flow from stream to spray.
Choice of Finishes: Available in Polished Chrome or
Stainless Steel (PVD) finishes.
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING HOLE
533mm
(21)
53.8mm
(2-3/16)
149.4mm
(5-7/8)
242.4mm
(9-9/16)
287.5mm
(11-5/16)
58.2mm
(2-5/16)
261.4mm
(10-5/16 )
253.7mm
(10 )
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
Pull-out kitchen faucet
Product
Number
Description
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
4101.100
Optional Soap Dish. Can be mounted anywhere on counter.
(hardware provided)
4101.115
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
ARCH™
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
  • Page 1 1
  • Page 2 2

American Standard 4101.001 User manual

American Standard
Brand
American Standard
Model
4101.001
Category
Faucets
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents