American Standard 4210.002 User manual

American Standard
Brand
American Standard
Model
4210.002
Category
Faucets
Type
User manual

This manual is also suitable for

Standard
®
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
MODEL NUMBER:
4210 Kitchen Faucet with Pull Out Spray Spout
Escutcheon plate (installation is optional). Chrome finish.
4210S Kitchen Faucet with Pull Out Spray Spout
Escutcheon plate (installation is optional). Satin Nickel finish.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Memory Position Valving: Allows user to turn valve on and
off at preferred temperature setting without readjusting handle
position each time.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Integral Check Valves: Prevents back flow.
Pull-out Spray Spout: Switches water flow from a stream
to a spray. Simplifies even the most difficult cleaning tasks.
Choice of Finishes: Choice of Polished Chrome or Satin
Nickel (PVD) finishes.
SUGGESTED SPECIFICATION:
Single control kitchen pull-out faucet shall feature a swivel pull-out spray spout, metal escutcheon plate and genuine
porcelain lever handle. Shall also feature washerless ceramic disc valve cartridge with integral hot limit safety stop, flexible
hose supplies and two integral check valves. Fitting shall be American Standard Model # 4210_.
GENERAL DESCRIPTION:
Metal body and metal escutcheon plate. Swivel pull-out spray
spout. Metal hose is 1250mm (4') long. Washerless 47mm
ceramic disc valve cartridge with integral hot limit safety stop.
Braided flexible supply hoses with 3/8" compression
connections. Brass mounting shank with brass fixation ring.
Complete with two integral check valves. 2.2 gpm/8.3L/min.
maximum flow rate. Can be mounted with or without supplied
escutcheon plate (escutcheon size 10-1/4"L x 2-1/2"W).
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
99mm
(3-7/8)
20˚
Pull-out kitchen faucet. Chrome finish.
Product
Number
Description
4210
Pull-out kitchen faucet. Satin Nickel finish.
4210S
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
197mm
(7-7/8)
257mm
(10-1/8)
482mm
(19)
237mm
(9-3/8)
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING
HOLE
260mm
(10-1/4)
57mm(2-1/4)
with escutcheon
76mm(3)
less escutcheon
4210 Shown
© 2008 AS America Inc.
A21
Standard
®
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
MODEL NUMBER:
4210 Kitchen Faucet with Pull Out Spray Spout
Escutcheon plate (installation is optional). Chrome finish.
4210S Kitchen Faucet with Pull Out Spray Spout
Escutcheon plate (installation is optional). Satin Nickel finish.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, precise
valve control and a lifetime of drip-free, maintenance-free
performance.
Memory Position Valving: Allows user to turn valve on and
off at preferred temperature setting without readjusting handle
position each time.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Integral Check Valves: Prevents back flow.
Pull-out Spray Spout: Switches water flow from a stream
to a spray. Simplifies even the most difficult cleaning tasks.
Choice of Finishes: Choice of Polished Chrome or Satin
Nickel (PVD) finishes.
SUGGESTED SPECIFICATION:
Single control kitchen pull-out faucet shall feature a swivel pull-out spray spout, metal escutcheon plate and genuine
porcelain lever handle. Shall also feature washerless ceramic disc valve cartridge with integral hot limit safety stop, flexible
hose supplies and two integral check valves. Fitting shall be American Standard Model # 4210_.
GENERAL DESCRIPTION:
Metal body and metal escutcheon plate. Swivel pull-out spray
spout. Metal hose is 1250mm (4') long. Washerless 47mm
ceramic disc valve cartridge with integral hot limit safety stop.
Braided flexible supply hoses with 3/8" compression
connections. Brass mounting shank with brass fixation ring.
Complete with two integral check valves. 2.2 gpm/8.3L/min.
maximum flow rate. Can be mounted with or without supplied
escutcheon plate (escutcheon size 10-1/4"L x 2-1/2"W).
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
99mm
(3-7/8)
20˚
Pull-out kitchen faucet. Chrome finish.
Product
Number
Description
4210
Pull-out kitchen faucet. Satin Nickel finish.
4210S
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
197mm
(7-7/8)
257mm
(10-1/8)
482mm
(19)
237mm
(9-3/8)
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING
HOLE
260mm
(10-1/4)
57mm(2-1/4)
with escutcheon
76mm(3)
less escutcheon
4210 Shown
© 2008 AS America Inc.
A22
  • Page 1 1
  • Page 2 2

American Standard 4210.002 User manual

American Standard
Brand
American Standard
Model
4210.002
Category
Faucets
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents