담 당 관리자
Model Description
MODEL
BRAND
Printing Specification
Part No.
1.
2.
User’s Guide Specification
User’s Guide Specification
Changes
4.
REV.
NO.
MM/DD/YY
SIGNATURE
CHANGE NO.
CHANGE CONTENTS
1
2
3
4
5
7
6
SUFFIX
LG
MFL67230031
(1202-REV01)
8
9
Special Instructions3.
Product Name
MJ
10
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
N
O
T
E
S
(1) Origin Notification
* LGEIN : Printed in Indonesia * LGEWA : Printed in U.K.
* LGESP : Printed in Brazil * LGEMX : Printed in Mexico
* LGEND : Printed in China * LGEIL : Printed in India
* LGEMA : Printed in Poland
42/50PA4500/4520
42/50PA4500/4520
JY Choi
12.02.05
JO Kim
11.12.15
HJ Shin
11.12.15
1. Trim Size (Format) : 170 mm x 240 mm
2. Printing Colors
• Cover : 1 COLOR (BLACK)
• Inside : 1 COLOR (BLACK)
3. Stock (Paper)
• Cover : Uncoated paper , 백상지 80 g/㎡
• Inside : Uncoated paper , 백상지 80 g/㎡
4. Printing Method : Off-set
5. Bindery : Saddle stitch
6. Language : English
7. Number of pages : 32
Feb/05/12
CHOI JIN YOUNG
EKPC200058 Added Isolator and changed PA49** contents
Maplitho grade below tolerance for GSM is 5 g/m2
(Tolerance +/- 5 mm)
Pagination sheet
Pagination sheet
P/NO. MFL67230032
Total pages : 96 pages
LG(EN)
P/no
…
Front cover
…
LG(EN)
Back cover
…
23
2
…
…
…
LG(FR)
…
2
…
23
LG(FR)
…
…
LG(POR)
…
2
…
23
LG(POR)
…
…
LG(ARA)
…
23
…
2
LG(ARA)
Front cover
Front cover
Front cover
Back cover
Back cover
Back cover
P/NO : MFL67230001 (1108-REV01)
Printed in Korea
P/NO : MFL67230031 (1202-REV01)
www.lg.com
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating the
set and retain it for future reference.
PA45**
PA49**
PA65**
MFL67230031
127(
y
$QWHQQD,VRODWRU,QVWDOODWLRQ*XLGH
ANTENNA/
CABLE IN
&DEOH$QWHQQD
:DOO
,VRODWRU
&RQQHFWWR79
&RQQHFWWR6HW7RSER[
RU
&RQQHFWRQHHQGRIWKHLVRODWRUWRFDEOHDQWHQQDMDFNDQGWKHRWKHUWR79VHWRUVHWWRSER[
Isolator Usage (Safety Caution)
"Equipment connected to the protective earthing of mains connection of the building, or through other
protective earthing to a cable distribution system using coaxial cable, may create fire hazard in some
circumstances. Connection to a cable distribution system has therefore to be provided through a device
providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)"
y
127(
1. Always use isolator with RF signal port (In wall RF port or in set RF Port).
2. Isolator will protect if there is any voltage difference between GND of power Board and
GND of Antenna Signal, the Antenna contact might be heated and excessive heat might
cause an accident, therefore Isolator installation is highly recommended.
3. Avoid disconnecting the antenna isolator after installation.
4. When applying RF isolator, a slight loss of signal sensitivity can occur.
5. You can improve safety of TV by efficiently removing power voltage from TV
antenna.
y
$QWHQQD,VRODWRU,QVWDOODWLRQ0HWKRG
*Above Pictures may differ from the actual.
y
,VRODWRU&RQQHFWLRQ0HWKRG
1
ISOLATOR GUIdE
ENG
ENGLISH
2
ENG
ENGLISH
SAFETY INSTRUCTIONS
y
Please read these safety precautions carefully before using the product.
y
In this manual, the illustration may be somewhat different from your product because it is
just example to help the instruction.
PRECAUTION IN INSTALLING THE PRODUCT
Keep away from heat sources like electrical
heaters.
- Electrical shock, fire, malfunction or
deformation may occur.
If you can smell smoke or other odours or hear
a strange sound unplug the power cord and
contact the service center.
- If you continue to use without taking proper
measures, electrical shock or fire can occur.
Do not use the product in damp place such
as a bathroom or any place where it is likely
to get wet.
- This may cause a fire or could give an
electric shock.
Install the product on a flat and stable place
that has no risk of dropping the product.
- If the product is dropped, you may be injured
or the product may be broken.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in
installation such as bookcase or rack.
- Ventilation required.
ELECTRICAL POWER RELATED PRECAUTIONS
Make sure to connect the power cable to a
properly earthed outlet.
- You may be electrocuted or injured.
Do not touch the power plug with wet hands.
Additionally, if the cord pin is wet or covered
with dust, dry the power plug completely or wipe
dust off.
- You may be electrocuted due to excess
moisture.
Never touch this product or antenna during a
thunder or lighting storm.
-
Y
ou may be electrocuted.
Do not insert a conductor (like a metal
chopstick) into one end of the power cable while
the other end is connected to the input terminal
on the wall.
Additionally, do not touch the power cable right
after plugging into the wall input terminal.
-
Y
ou may be electrocuted.
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
PRECAUTIONS WHEN MOVING THE PRODUCT
Do not impact the product when moving it.
- You may be electrocuted or the product
can be damaged.
Make the panel face forward and hold it
with both hands to move.
-
If you drop the product, the damaged
product can cause electric shock or fire.
Contact your nearest service center for
repair
.
Make sure to turn off the product.
Make sure to remove all cables before
moving the product.
-
Y
ou may be electrocuted or the product
can be damaged.
PRECAUTIONS WHEN USING THE PRODUCT
Do not disassemble, repair or modify the
product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check,
calibration or repair.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN /
BURN-IN” ON YOUR TELEVISION SCREEN
-
When a fixed image (e.g. logos, screen menus, video game,
computer display or teletext pages) is displayed on the
television for an extended period it can become permanently
imprinted on the screen. This phenomenon is known as “image
burn” or “burn-in”. Image burn is not covered under the
manufacturer’s warranty.
-
In order to prevent image burn, avoid displaying a fixed
image on your television’s screen for a prolonged period (2 or
more hours for LCD, 1 or more hours for Plasma).
-
Image burn can also occur on the letterboxed areas of
your television if you use the 4:3 aspect ratio setting for an
extended period.
As long as this unit is connected to the AC wall outlet, it is
not disconnected from the AC power source even if you
turn off this unit by SWITCH.
y
If you ignore the warning message, you may be seriously injured or there is a
possibility of accident or death.
y
If you ignore the caution message, you may be slightly injured or the product may
be damaged.
CAUTION
WARNING
WARNING
CAUTION
WARNING
CAUTION
WARNING
CAUTION
WARNING
SAFETY INSTRUCTIONS
3
ENG
ENGLISH
TABLE OF CONTENTS / ADDITIONAL INFORMATION
TABLE OF CONTENTS
2
SAFETY INSTRUCTIONS
3
ADDITIONAL INFORMATION
4
INSTALLATION PROCEDURE
4
ASSEMBLING AND PREPARING
4 Unpacking
7
Separate purchase
7
Parts and buttons
9 Lifting and moving the TV
10
Setting up the
TV
10 - Attaching the stand
12 - Tidying cables
13
-
Mounting on a table
1
4 - Mounting on a wall
15
REMOTE CONTROL
16 WATCHING TV
16 Connecting an antenna
16 Turning the TV on for the first time
17
MAKING CONNECTIONS
17 Connecting your Unit
18 ENTERTAINMENT
18 - Connecting USB storage devices
19
-
Browsing files
20
TROUBLESHOOTING
21
SPECIFICATIONS
23
OPEN SOURCE SOFTWARE NOTICE
Viewing the owner’s manual
The owner’s manual in PDF file format is supplied on the enclosed CD. Install the Adobe Acrobat Reader to
view the owner’s manual on your PC.
1
Insert the supplied CD. The web page appears automatically.
2
Click Owner’s Manual on the web page.
3
View the owner’s manual.
If the web page does not appear automatically, access My computer and then click LG and index.htm
to view the owner’s manual.
NOTE
ADDITIONAL INFORMATION
1
ISOLATOR GUIDE
24
ENVIRONMENTAL INFORMATION
4
ENG
ENGLISH
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and item.
Remote control,
Batteries (AAA)
( See p. 15)
Owner’s manual,
CD manual
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Screw for assembly
Power Cord Holder
( See p. 12)
Power Cord
4 EA, M4 x 30
( See p. 10~11)
3 EA, M5 x 16
( See p. 10)
Protection Cover
( See p. 11)
Ferrite core
(Depending on model)
Cable Holder
( See p. 12)
Stand Body
( See p. 10)
Stand Base
( See p. 10)
Isolator
(Depending on model)
( See p. 7)
Only 42/50PA45**, 50/60PA65**
INSTALLATION PROCEDURE
1
Open the package and make sure all the accessories are included.
2
Attach the stand to the TV set.
3
Connect an external device to the TV set.
NOTE
y Image shown may differ from your TV.
y Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
y Your TV's feature may vary from country to counrty depending on channel broadcast system.
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Only 42/50PA49**
Remote control,
Batteries (AAA)
( See p. 15)
Owner’s manual,
CD manual (Included
Pentouch Software)
Pentouch Caution Guide-
lines
Screw for assembly Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing
cloth.
Power Cord
4 EA, M4 x 30
( See p. 10~11)
3 EA, M5 x 16
( See p. 10)
Protection Cover
( See p. 11)
Cable Holder
( See p. 12)
Power Cord Holder
( See p. 12)
Ferrite core
(Depending on model)
D-sub 15 pin signal cable Eye-bolt & Wall bracket
2 EA ( See p. 13)
Cradle Touch Pen Dongle
(AN-TD200)
Charging Cable
Tip
The number of tip may differ
depending on the model.
Touch Pen (AN-TP300)
The number of touch pen
may differ depending on the
model.
Stand Base
( See p. 10)
Stand Body
( See p. 10)
Isolator
(Depending on model)
( See p. 7)
FREEZE
RATIO
L/R SELECT
ENTER
BACK
EXIT
Q.MENU
INFO
MENU
CHVOL
P
A
G
E
FAV
3D
MUTE
1 2 3
4 5 6
7 8
0
9
MARK
LIST
FLASHBK
ENERGY
SAVING
TV
AV MODE
INPUT
Home
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
Do not use any pirated items to ensure the safety and product life span.
y
Any damages or injuries by using pirated items are not covered by the warranty.
CAUTION
y
The items supplied with your product may vary depending on the model and Country.
y
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
y
How to use the ferrite core.
This feature is not available for all country.
1. Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
NOTE
(Gray)
[Cross Section of
Ferrite Core]
[to an External device]
[Figure 1]
[to the TV]
10 mm(+ / - 5 mm)
- If there are three ferrite cores, follow as shown in Figures 1 and 2.
- If there are four ferrite cores, follow as shown in Figure 1, 2 and 3.
- If there is charging cable, additionally follow as shown in Figure 4.
2. Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
(Black)
[Cross Section of
Ferrite Core]
3. Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,
R cable. Place the ferrite core close to the TV.
(Black)
[Cross Section of
Ferrite Core]
[to a wall plug]
[to the TV]
[Figure 2]
[to a wall plug]
[to the TV]
[Figure 3]
10 mm(+ / - 5 mm)
y For an optimal connection, HDMI cables and USB de-
vices should have bezels less than 10 mm thick and
18 mm width. Use an extension cable that supports
USB 2.0 if the USB cable or USB memory stick does
not fit into your TV’s USB port.
*A 10 mm
*B 18 mm
4. Use the ferrite core to reduce the electromagnetic interference in the charging cable.
Wind the charging cable on the ferrite core once. Place the ferrite core close to an external device and
the cradle or touch pen.
[to an External device]
[to the Cradle or Touch pen]
[Figure 4]
[Cross Section of
Ferrite Core]
(Gray)
*Above Pictures may differ from the actual.
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
y The TV can be placed in standby mode in order to reduce the power consumption. And the TV
should be turned off if it will not be watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
NOTE
y
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
y
Do not drag the TV. The floor or the product may be damaged.
y
Some models have a thin film attached on to the screen and this must not be removed.
CAUTION
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with compatible LG Plasma TV.
AN-TP300
Touch Pen, Cradle
The number of touch pen and
cradle may differ depending on
the model.
Compatibility
42/50PA45** 42/50PA49** 50/60PA65**
AN-TP300
Touch Pen, Cradle
•
Separate purchase
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Button Description
/I Turns the power on or off
INPUT Changes the input source
SETTINGS Accesses the main menus, or saves your input and exits the menus
OK
Selects the highlighted menu option or confirms an input
-
+
Adjusts the volume level
v
^
Scrolls through the saved programmes
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
Buttons
Only 42/50PA45**, 42/50PA49**, 50/60PA65**
/DVI IN 2
/DVI IN 2
IN 3
USB IN
USB IN
IN
1
COMPONENT
IN
VIDEO
AUDIO
LP
B
P
R
R
1
2
Y
VIDEO
AUDIO
R
L/MONO
AV IN
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
ANTENNA/
CABLE IN
AUDIO IN
(RGB/DVI)
INPUT
SETTINGS
OK
USB
input
HDMI
/DVI
input
HDMI
input
Screen
Connection panel
Buttons
(Only 42/50PA450*)
(Only 42/50PA452*,
42/50PA49**,
50/60PA65**)
Speakers
Remote control and
intelligent
1
sensors
Power indicator
y
Red – In Standby mode
y
Off – TV turns on
Side Connection panel
(Can be adjusted using the
in the menu.)
■ Image shown may differ from your TV.
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Buttons
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
y
It is recommended to move the TV in the
box or packing material that the TV originally
came in.
y
Before moving or lifting the TV, disconnect
the power cord and all cables.
y
When holding the TV, the screen should face
away from you to prevent the screen from
scratches.
y
Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
y
When transporting a large TV, there should
be at least 2 people.
y
When transporting the TV by hand, hold the
TV as shown in the following illustration.
y
When transporting the TV, do not expose the
TV to jolts or excessive vibration.
y
When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
y
Avoid touching the screen at all times, as
this may result in damage on the screen
or some of the pixels used to create
images.
CAUTION
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
M4 x 30
4 EA
M5 x 16
3 EA
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
1 2
3
Front
Only 42/50PA45**, 42/50PA49**,50/60PA65**
y
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
y
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
Stand Base
Stand Body
■ Image shown may differ from your TV.
11
ENG
ENGLISH
ASSEMBLING AND PREPARING
M4 x 30
2 EA
M4 x 30
4 EA
1
2
To detach the stand,
Protection cover
3
y
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
y
This will protect the opening from accu-
mulating dust and dirt.
y
When installing the wall mounting
bracket, use the Protection cover.
NOTE
y
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
CAUTION
■ Image shown may differ from your TV.
12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Tidying cables
1
Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
Power Cord Holder
2
Gather and bind the cables with the Cable
Holder.
Cable Holder
CAUTION
y Do not move the TV by holding the cable
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
■ Image shown may differ from your TV.
13
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
Securing the TV to a wall (Depending on model)
1
Insert and tighten the eye-bolts on the back of
the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
y
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
NOTE
y
Make sure that children do not climb on
or hang on the TV.
CAUTION
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
y Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.
NOTE
y
When adjusting the angle of the product,
watch out for your fingers.
CAUTION
■ Image shown may differ from your TV.
14
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
Use the screws that are listed on the
VESA standard screw specifications.
y
The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
NOTE
y
Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
y
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
y
Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
y
Use the screws and wall mount bracket
that meet the VESA standard. Any
damages or injuries by misuse or using
an improper accessory are not covered
by the warranty.
CAUTION
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Wall Mounting Bracket
Mounting on a wall
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Model 42/50PA45**
42/50PA49**
50PA65**
60PA65**
VESA (A x B) 400 x 400 600 x 400
Standard screw M6 M8
■ Image shown may differ from your TV.
15
ENG
ENGLISH
REMOTE CONTROL
POWER
ENERGY
SAVING
INFO
LIST
SETTINGS
OK
Q.MENU
EXIT
P
A
G
E
MUTE
FAV
Q.VIEW
RATIO INPUTGUIDE
TV/RAD
P
ENERGY
1 2 3
4 5 6
7 8
0
9
P
A
G
E
SAVING
RATIO
INPUT
FAV
MUTE
LIST
Q.VIEW
EXIT
OK
Q.MENU
SETTINGS
INFO
GUIDE
TV/
RAD
AV MODE
P
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching
and ends to the label inside the compartment, and close the
battery cover. Be sure to point the remote control to the remote control sensor on
the TV.
To remove the batteries, perform the installation actions in reverse.
y
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
y
In Analogue TV and in some countries, some remote control buttons may not work.
(POWER)
Turns the TV on or off.
ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption .
INPUT Changes the input source; Turns the TV on .
TV/RAD Selects Radio, TV and DTV programme.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
+ - Adjusts the volume level.
FAV Accesses your favourite programme list.
MUTE Mutes all sounds.
P
∧∨ (P + -)
Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
GUIDE Shows programme guide.
SETTINGS Accesses the main menus, or saves your input and exit the menus.
Q. MENU Accesses the quick menus.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
OK Selects menus or options and confirms your input.
Returns to the previous level.
INFO Views the information of the current programme and screen.
EXIT Clears all on-screen displays and return to TV viewing.
Coloured buttons These access special functions in some menus.
1
TELETEXT
BUTTONS
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
SUBTITLE Recalls your preferred subtitle in digital mode.
Control buttons
(
, , , , )
Controls the MY MEDIA menus, or the SIMPLINK compatible devices
(USB,SIMPLINK).
SIMPLINK Accesses the AV devices connected with the HDMI cable through HDMI-
CEC.
Opens the SIMPLINK menu.
RATIO Resizes an image.
AV MODE
(Depending on model)
Selects an AV mode
1
1
or
or
■ Image shown may differ from your TV.
16
ENG
ENGLISH
WATCHING TV
4
When the basic settings are complete,
press OK.
y If you do not complete the Initial setting, it
will appear whenever the TV turns on.
y Disconnect the power cord from the
power outlet when you do not use the TV
for a long period of time.
NOTE
5
To turn the TV off, press
(POWER) .
WATCHING TV
Connecting an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
y
Use a signal splitter to use more than 2
TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y
If the image quality is poor with an
antenna connected, aim the antenna to
the correct direction.
y
An antenna cable and converter are not
supplied.
NOTE
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press
(POWER) to turn
the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
y
You can also access Factory Reset by
accessing OPTION in the main menus.
NOTE
3
Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language Selects a language to display.
Mode Setting Selects Home Use for the
Home environment.
Country Selects a country to display.
(Except Israel)
Time Zone Selects a Time Zone to
display.(Only Australia)
Auto Tuning Scans and saves available
channels automatically.
y
DTV mode control buttons may not
function based on country broadcasting
circumstances. (Only DTV)
y
In country that Digital broadcasting
regulation isn’t fixed, some DTV function
may not work depending on digital
broadcasting circumstances. (Only DTV)
y
To display images in the best quality for
your home environment, select Home
Use.
y
Store Demo is suitable for the retail
environment.
y
If you select Store Demo, the any
customized settings will switch back to
the default settings of Store Demo in 5
minutes.
NOTE
ANTENNA /
CABLE IN
Add Isolator
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
LG 50PA4520 Owner's manual
- Category
- LED TVs
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
