CAME ZR24 is a control board compatible with CAME single-phase ratio motors with power up to 500W and 50÷60Hz frequency. Designed and built by CAME, it complies with current regulations, has an ABS container with an IP54 protection level and requires 230V (AC) power on terminal blocks L1 and L2. Thanks to the low voltage (24V) command accessories, the accessories’ overall power should not exceed 20W. Some of the main features are: Re-opening during closure, Total stop, Automatic closing, “Operator present”.
CAME ZR24 is a control board compatible with CAME single-phase ratio motors with power up to 500W and 50÷60Hz frequency. Designed and built by CAME, it complies with current regulations, has an ABS container with an IP54 protection level and requires 230V (AC) power on terminal blocks L1 and L2. Thanks to the low voltage (24V) command accessories, the accessories’ overall power should not exceed 20W. Some of the main features are: Re-opening during closure, Total stop, Automatic closing, “Operator present”.
CAME ZR24 is a control board compatible with CAME single-phase ratio motors with power up to 500W and 50÷60Hz frequency. Designed and built by CAME, it complies with current regulations, has an ABS container with an IP54 protection level and requires 230V (AC) power on terminal blocks L1 and L2. Thanks to the low voltage (24V) command accessories, the accessories’ overall power should not exceed 20W. Some of the main features are: Re-opening during closure, Total stop, Automatic closing, “Operator present”.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI