Paradyne Hotwire 7995 Quick Installation Instructions

Brand
Paradyne
Model
Hotwire 7995
Category
Power extensions
Type
Quick Installation Instructions
7995-A2-374 SHDSL-Serial NTU
Quick Installation Instructions
Document Number 7995-A2-GZ10-00
September 2004
Installation
➊ Connect the LINE port to your DSL line with an
RJ45 connector cable.
➋ Connect the V.35 interface to your router.
➌ Connect the LAN port to the SNMP management
network with an RJ45 connector cable.
➍ Connect the Console port to a VT100 compatible
terminal or PC COM port with an RS232 cable.
➎ Connect the Power jack to the power adapter with
the power adapter cord. Attach the power adapter
to the wall outlet or other AC source. Then turn on
the power switch on the rear panel.
It can take a couple of minutes for the NTU to link up
with its partner unit.The link is up when the DSL LOS
indicator LED is off.
See the User’s Guide for management and
troubleshooting information.
Off
On
Power
Console
LAN
V.35
LINE
DSL Line
Router
SNMP
Management
VT100
Compatible
Terminal
Power
Adapter
04-17571
1
2
3
4
5
Copyright © 2004 Paradyne Corporation. Printed in U.S.A.
  • Page 1 1

Paradyne Hotwire 7995 Quick Installation Instructions

Brand
Paradyne
Model
Hotwire 7995
Category
Power extensions
Type
Quick Installation Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents