http://www.3com.com/
Part No. DUA1720-3BAA04
Published January 2003
SuperStack
®
3
Switch Implementation Guide
Generic guide for units in the SuperStack 3 Switch 4400 Series:
3C17203, 3C17204, 3C17205, 3C17206
3Com Corporation
5500 Great America
Parkway, Santa Clara,
California 95052-8145
Copyright © 2003, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced
in any form or by any means or used to make any derivative work (such as translation, transformation, or
adaptation) without written permission from 3Com Corporation.
3Com Corporation reserves the right to revise this documentation and to make changes in content from time
to time without obligation on the part of 3Com Corporation to provide notification of such revision or change.
3Com Corporation provides this documentation without warranty, term, or condition of any kind, either
implied or expressed, including, but not limited to, the implied warranties, terms or conditions of
merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements or
changes in the product(s) and/or the program(s) described in this documentation at any time.
If there is any software on removable media described in this documentation, it is furnished under a license
agreement included with the product as a separate document, in the hard copy documentation, or on the
removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy,
please contact 3Com and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software described herein are
provided to you subject to the following:
All technical data and computer software are commercial in nature and developed solely at private expense.
Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or
as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are
provided in 3Com’s standard commercial license for the Software. Technical data is provided with limited rights
only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable.
You agree not to remove or deface any portion of any legend provided on any licensed program or
documentation contained in, or delivered to you in conjunction with, this User Guide.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not
be registered in other countries.
3Com, the 3Com logo and SuperStack are registered trademarks of 3Com Corporation.
Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and Windows
NT are registered trademarks of Microsoft Corporation. Novell and NetWare are registered trademarks of
Novell, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively
through X/Open Company, Ltd. Solaris is a registered trademark of Sun Microsystems.
IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Inc.
All other company and product names may be trademarks of the respective companies with which they are
associated.
ENVIRONMENTAL STATEMENT
It is the policy of 3Com Corporation to be environmentally-friendly in all operations. To uphold our policy, we
are committed to:
Establishing environmental performance standards that comply with national legislation and regulations.
Conserving energy, materials and natural resources in all operations.
Reducing the waste generated by all operations. Ensuring that all waste conforms to recognized environmental
standards. Maximizing the recyclable and reusable content of all products.
Ensuring that all products can be recycled, reused and disposed of safely.
Ensuring that all products are labelled according to recognized environmental standards.
Improving our environmental record on a continual basis.
End of Life Statement
3Com processes allow for the recovery, reclamation and safe disposal of all end-of-life electronic components.
Regulated Materials Statement
3Com products do not contain any hazardous or ozone-depleting material.
Environmental Statement about the Documentation
The documentation for this product is printed on paper that comes from sustainable, managed forests; it is
fully biodegradable and recyclable, and is completely chlorine-free. The varnish is environmentally-friendly, and
the inks are vegetable-based with a low heavy-metal content.
CONTENTS
ABOUT THIS GUIDE
Conventions 10
Related Documentation 11
Documentation Comments 11
Product Registration 12
1 SWITCH FEATURES OVERVIEW
What is Management Software? 15
Upgrading the Switch 4400 SE 15
Switch Features Explained 17
Automatic IP Configuration 17
Port Security 17
Power Management 18
Aggregated Links 18
Auto-negotiation 18
Multicast Filtering 19
Resilient Links 20
Spanning Tree Protocol and Rapid Spanning Tree Protocol 20
Switch Database 21
Traffic Prioritization 21
Roving Analysis 21
RMON 22
Webcache Support 22
Broadcast Storm Control 22
VLANs 22
Configuration Save and Restore 23
2 OPTIMIZING BANDWIDTH
Port Features 27
Duplex 27
Flow Control 28
Auto-negotiation 28
Smart Auto-sensing 29
Aggregated Links 29
How 802.3ad Link Aggregation Operates 30
Implementing 802.3ad Aggregated Links 31
Aggregated Links and Your Switch 33
Aggregated Link — Manual Configuration Example 37
3 USING MULTICAST FILTERING
What is an IP Multicast? 39
Benefits of Multicast 40
Multicast Filtering 40
Multicast Filtering and Your Switch 41
IGMP Multicast Filtering 42
4 USING RESILIENCE FEATURES
Resilience Feature Overview 46
What are Resilient Links? 46
Spanning Tree Protocol (STP) 47
Rapid Spanning Tree Protocol (RSTP) 48
What is STP? 48
How STP Works 50
STP Requirements 50
STP Calculation 51
STP Configuration 52
STP Reconfiguration 52
How RSTP Differs to STP 52
STP Example 52
STP Configurations 54
Default Behavior 56
RSTP Default Behavior 56
Fast Start Default Behavior 56
Using STP on a Network with Multiple VLANs 57
5 USING THE SWITCH DATABASE
What is the Switch Database? 59
How Switch Database Entries Get Added 59
Switch Database Entry States 60
6 USING TRAFFIC PRIORITIZATION
What is Traffic Prioritization? 62
How Traffic Prioritization Works 63
Traffic Classification 64
Traffic Marking 65
Traffic Re-Marking 67
Traffic Prioritization 67
Traffic Queues 71
Configuring Traffic Prioritization on the Switch 71
Methods of Configuring Traffic Prioritization 72
Important QoS Considerations 72
Default QoS Configurations 74
Example QoS Configurations 75
Other Configuration Examples and Guidelines 76
7 STATUS MONITORING AND STATISTICS
Roving Analysis Port 77
Roving Analysis and Your Switch 77
RMON 78
What is RMON? 78
The RMON Groups 78
Benefits of RMON 79
RMON and the Switch 80
Alarm Events 81
The Default Alarm Settings 81
The Audit Log 82
Email Notification of Events 82
8 SETTING UP VIRTUAL LANS
What are VLANs? 85
Benefits of VLANs 86
VLANs and Your Switch 87
The Default VLAN 87
Communication Between VLANs 87
Creating New VLANs 88
VLANs: Tagged and Untagged Membership 88
VLAN Configuration Examples 89
Using Untagged Connections 89
Using 802.1Q Tagged Connections 90
9 USING WEBCACHE SUPPORT
What is Webcache Support? 93
Benefits of Webcache Support 93
How Webcache Support Works 94
Cache Health Checks 95
Webcache Support Example 96
Important Considerations 97
10 USING AUTOMATIC IP CONFIGURATION
How Your Switch Obtains IP Information 100
How Automatic IP Configuration Works 100
Automatic Process 101
Important Considerations 102
Server Support 102
Event Log Entries and Traps 102
11 MAKING YOUR NETWORK SECURE
Port Security 104
What is Network Login? 105
How Network Login Works 106
Important Considerations 107
What is Disconnect Unauthorized Device (DUD)? 107
How DUD Works 107
What is Switch Management Login? 108
Benefits of RADIUS Authentication 109
How RADIUS Authentication Works 109
Important Considerations 111
What is RADIUS? 112
12 POWER MANAGEMENT AND CONTROL
What is Power over Ethernet? 113
Benefits of Power over Ethernet 113
Planning Power Budgets 114
Calculating Power Budgets 114
Implementing a Power Plan 115
Configuring a Guaranteed Power Plan 116
Monitoring Power Usage 116
Monitoring Power Usage LEDs 117
Monitoring Port LEDs 117
Monitoring Power Usage using the Web Interface 118
Problem Solving 119
A CONFIGURATION RULES
Configuration Rules for Gigabit Ethernet 123
Configuration Rules for Fast Ethernet 124
Configuration Rules with Full Duplex 125
B NETWORK CONFIGURATION EXAMPLES
Simple Network Configuration Examples 128
Segmentation Switch Example 128
Collapsed Backbone Switch Example 129
Desktop Switch Example 130
Advanced Network Configuration Examples 131
Improving the Resilience of Your Network 131
Enhancing the Performance of Your Network 132
Utilizing the Traffic Prioritization Features of Your Network 133
C IP ADDRESSING
IP Addresses 135
Simple Overview 135
Advanced Overview 136
Subnets and Subnet Masks 138
Default Gateways 140
GLOSSARY
INDEX
ABOUT THIS GUIDE
This guide describes the features of the SuperStack
®
3 Switch 4400 Series
and outlines how to use these features to optimize the performance of
your network.
Most features detailed in this guide are common to all Switches in the
4400 Series. Refer to the Management Quick Reference Guide that
accompanies your Switch for details of the specific features your Switch
supports.
This guide is intended for the system or network administrator who is
responsible for configuring, using, and managing the Switches. It
assumes a working knowledge of local area network (LAN) operations
and familiarity with communication protocols that are used to
interconnect LANs.
For detailed descriptions of the Web interface operations and the
Command Line Interface (CLI) commands that you require to manage the
Switch please refer to the Management Interface Reference Guide
supplied in HTML format on the CD-ROM that accompanies your Switch
or on the 3Com Web site.
If release notes are shipped with your product and the information there
differs from the information in this guide, follow the instructions in the
release notes.
Most user guides and release notes are available in Adobe Acrobat
Reader Portable Document Format (PDF) or HTML on the 3Com
World Wide Web site:
http://www.3com.com/
10 ABOUT THIS GUIDE
Conventions Table 1 and Table 2 list conventions that are used throughout this guide.
Table 1 Notice Icons
Icon Notice Type Description
Information note Information that describes important features or
instructions
Caution Information that alerts you to potential loss of data or
potential damage to an application, system, or device
Warning Information that alerts you to potential personal injury
Table 2 Text Conventions
Convention Description
Screen displays This typeface represents information as it appears on the
screen.
Syntax The word “syntax” means that you must evaluate the syntax
provided and then supply the appropriate values for the
placeholders that appear in angle brackets. Example:
To change your password, use the following syntax:
system password <password>
In this example, you must supply a password for <password>.
Commands The word “command” means that you must enter the
command exactly as shown and then press Return or Enter.
Commands appear in bold. Example:
To display port information, enter the following command:
bridge port detail
The words “enter”
and “type”
When you see the word “enter” in this guide, you must type
something, and then press Return or Enter. Do not press
Return or Enter when an instruction simply says “type.”
Keyboard key names If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+). Example:
Press Ctrl+Alt+Del
Words in italics Italics are used to:
Emphasize a point.
Denote a new term at the place where it is defined in the
text.
Identify menu names, menu commands, and software
button names. Examples:
From the Help menu, select Contents.
Click OK.
Related Documentation 11
Related
Documentation
In addition to this guide, each Switch documentation set includes the
following:
SuperStack 3 Switch 4400 Getting Started Guide
This guide contains:
all the information you need to install and set up the Switch in its
default state
information on how to access the management software to begin
managing the Switch.
SuperStack 3 Switch Management Interface Reference Guide
This guide provides detailed information about the Web interface and
Command Line Interface that enable you to manage the Switch. It is
supplied in HTML format on the CD-ROM that accompanies the
Switch.
SuperStack 3 Switch Management Quick Reference Guide
This guide contains:
a list of the features supported by the Switch.
a summary of the Web interface and Command Line Interface
commands for the Switch.
Release Notes
These notes provide information about the current software release,
including new features, modifications, and known problems.
There are other publications you may find useful, such as:
Documentation accompanying the Advanced Redundant Power
system.
Documentation accompanying the Expansion Modules.
Documentation accompanying 3Com Network Supervisor. This is
supplied on the CD-ROM that accompanies the Switch.
Documentation
Comments
Your suggestions are very important to us. They will help make our
documentation more useful to you. Please e-mail comments about this
document to 3Com at:
pddtechpubs_comments@3com.com
12 ABOUT THIS GUIDE
Please include the following information when contacting us:
Document title
Document part number (on the title page)
Page number (if appropriate)
Example:
SuperStack 3 Switch Implementation Guide
Part number: DUA1720-3BAA04
Page 25
Please note that we can only respond to comments and questions about
3Com product documentation at this e-mail address. Questions related to
technical support or sales should be directed in the first instance to your
network supplier.
Product
Registration
You can now register your SuperStack 3 Switch on the 3Com Web site:
http://www.3com.com/register/
I
SWITCH FEATURES
Chapter 1 Switch Features Overview
Chapter 2 Optimizing Bandwidth
Chapter 3 Using Multicast Filtering
Chapter 4 Using Resilience Features
Chapter 5 Using the Switch Database
Chapter 6 Using Traffic Prioritization
Chapter 7 Status Monitoring and Statistics
Chapter 8 Setting Up Virtual LANs
Chapter 9 Using Webcache Support
Chapter 10 Using Automatic IP Configuration
Chapter 11 Making Your Network
Secure
Chapter 12 Power
Management
and Control
14
1
SWITCH FEATURES OVERVIEW
This chapter contains introductory information about the SuperStack
®
3
Switch 4400 management software and supported features. It covers the
following topics:
What is Management Software?
Switch Features Explained
For detailed descriptions of the Web interface operations and the
Command Line Interface (CLI) commands that you require to manage the
Switch please refer to the Management Interface Reference Guide
supplied in HTML format on the CD-ROM that accompanies your Switch.
What is
Management
Software?
Your Switch can operate in its default state. However, to make full use of
the features offered by the Switch, and to change and monitor the way it
works, you have to access the management software that resides on the
Switch. This is known as managing the Switch.
Managing the Switch can help you to improve its efficiency and therefore
the overall performance of your network.
There are several different methods of accessing the management
software to manage the Switch. These methods are explained in
Chapter 3 of the Getting Started Guide that accompanies your Switch.
Upgrading the
Switch 4400 SE
You can use the Switch 4400 SE Enhanced Software Upgrade (3C17207)
to upgrade the SuperStack 3 Switch 4400 SE (3C17206) to the enhanced
software functionality of the other products in the SuperStack 3 Switch
4400 Series. These features include:
Webcache Support
Advanced Traffic Prioritization
Configuration Save and Restore
16 CHAPTER 1: SWITCH FEATURES OVERVIEW
Network Login
RADIUS Authentication of Switch Management Login
The Switch 4400 and Switch 4400 SE can only be stacked together if the
Switch 4400 SE has been upgraded using the Switch 4400 SE Enhanced
Software Upgrade (3C17207). This ensures that both Switches support
the same features across a stack.
Once a Switch 4400 SE has been upgraded with the Enhanced Software
Upgrade (3C17207), it can be stacked with Switch 4400 units, but not
with Switch 4400 SE units that have not been upgraded.
For further
information about stacking, refer to Chapter 2 of the Getting Started
Guide that accompanies your Switch.
To upgrade the Switch 4400 SE:
1 Purchase the Switch 4400 SE Enhanced Software Upgrade (3C17207)
from a 3Com distributor. This is supplied with an encrypted License Key
that you must register on the 3Com Web site.
2 Visit the following URL on the 3Com Web site:
http://www.3com.com/register
3 Select Switches.
4 Select Switch 4400 SE Enhanced Software Upgrade.
5 Enter the Serial Number of your SuperStack 3 Switch 4400 SE unit. The
Serial Number can be found on the underside of the unit.
6 Enter the License Key of the Enhanced Software Upgrade. The License
Key is supplied on the cover of the Switch 4400 SE Enhanced Software
Upgrade CD.
7 Enter your email address. 3Com uses this address to confirm the details
of your Upgrade License.
8 Select Submit.
If you have not already done so, you must now register your SuperStack 3
Switch 4400 SE unit. Your Switch 4400 SE unit must be registered before
you can use the Enhanced Software Upgrade.
An Activation Key for the Upgrade License is displayed, along with the
unit and License details. Make a note of the Activation Key (this is also
sent to the email address you entered in step 7
above).
Switch Features Explained 17
9 Log in to the Command Line Interface (CLI) of the Switch 4400 SE unit
that you are upgrading.
10 At the Top-level menu, enter:
system license add
11 Enter the Activation Key for your Upgrade License. Enter Yes to confirm
the installation of the license. The Enhanced Software features are now
available on this unit.
If your Switch 4400 SE has additional features enabled by a License Key,
and that Switch fails, you do not need to purchase an additional License
Key. In order to re-use the License Key, when you raise a Return Materials
Authorization (RMA) with 3Com for the failed product, your License Key
will be released and you will be able to re-use it against the replacement
product.
To re-use your License Key, you must re-register it against the
replacement product at the following URL:
http://www.3com.com/register
Switch Features
Explained
The management software provides you with the capability to change the
default state of some of the Switch features. This section provides a brief
overview of these features their applications are explained in more
detail later in this guide.
For a list of the features supported by your Switch, please refer to the
Management Quick Reference Guide that accompanies your Switch.
Automatic IP
Configuration
Your Switch can have its IP information automatically configured using a
DHCP server, Auto-IP, or BOOTP server. Alternatively, you can manually
configure the IP information.
For more information about how the automatic IP configuration feature
works, see Chapter 10
Using Automatic IP Configuration.
Port Security Your Switch has the following port security features, which guard against
unauthorized users connecting devices to your network:
Network Login — controls user access at the network edge by
blocking or unblocking access on a per-port basis.
18 CHAPTER 1: SWITCH FEATURES OVERVIEW
Disconnect Unauthorized Device (DUD) — disables a port if an
unauthorized device transmits data on it.
Switch Management Login — user name and password information is
stored in a database on a RADIUS server in your network. Log in
attempts to the Switch are remotely authenticated by the RADIUS
server.
For more information about how the port security features work, see
Chapter 11
Making Your Network Secure.
Power Management Power Management is the supply and control of power to connected
Ethernet devices. Power Management provides two benefits:
Cabling needs are reduced — Power over Ethernet (802.3af)
compliant devices need only an Ethernet cable.
Reliability is increased — As the power is supplied over the Ethernet
cable it can be backed up by redundant and uninterruptible power
supplies.
Power Management is only available on the Switch 4400 PWR
(3C17205).
For more information about power management, see Chapter 12
Power Management and Control.
Aggregated Links Aggregated links are connections that allow devices to communicate
using up to four links in parallel. Aggregated links provide two benefits:
They can potentially double, triple or quadruple the bandwidth of a
connection.
They can provide redundancy — if one link is broken, the other links
share the traffic for that link.
For more information about aggregated links, see Chapter 2
Optimizing Bandwidth.
Auto-negotiation Auto-negotiation allows ports to auto-negotiate port speed,
duplex-mode (only at 10 Mbps and 100 Mbps) and flow control. When
auto-negotiation is enabled (default), a port “advertises” its maximum
Switch Features Explained 19
capabilities — these capabilities are by default the parameters that
provide the highest performance supported by the port.
1000BASE-SX ports do not support auto-negotiation of port speed.
Ports operating at 1000 Mbps only support full duplex mode.
For details of the auto-negotiation features supported by your Switch,
please refer to the Management Quick Reference Guide that
accompanies your Switch.
Duplex
Full duplex mode allows packets to be transmitted and received
simultaneously and, in effect, doubles the potential throughput of a link.
Flow Control
All Switch ports support flow control, which is a mechanism that
minimizes packet loss during periods of congestion on the network.
Flow control is supported on ports operating in half duplex mode, and is
implemented using the IEEE Std 802.3-2002 (incorporating 802.3x) on
ports operating in full duplex mode.
Smart Auto-sensing
Smart auto-sensing allows auto-negotiating multi-speed ports, such as
10/100 Mbps or 100/1000 Mbps, to monitor and detect high error rates,
or problems in the “physical” interconnection to another port. The port
reacts accordingly by tuning the link from its higher speed to the lower
supported speed to provide an error-free connection to the network.
1000BASE-SX ports do not support smart auto-sensing.
For more information about auto-negotiation and port capabilities, see
Chapter 2
Optimizing Bandwidth.
Multicast Filtering Multicast filtering allows the Switch to forward multicast traffic to only
the endstations that are part of a predefined multicast group, rather than
broadcasting the traffic to the whole network.
The multicast filtering system supported by your Switch uses IGMP
(Internet Group Management Protocol) snooping to detect the
20 CHAPTER 1: SWITCH FEATURES OVERVIEW
endstations in each multicast group to which multicast traffic should be
forwarded.
For more information about multicast filtering, see Chapter 3
Using
Multicast Filtering.
Resilient Links The resilient link feature enables you to protect critical links and prevent
network downtime should those links fail. Setting up resilient links
ensures that if a main communication link fails, a standby duplicate link
automatically takes over the task of the main link. Each main and standby
link pair is referred to as a resilient link pair.
Resilient links are a simple method of creating redundancy that provides
you with a fast reaction to link failure. Resilient links are quick to set up,
you have full control over their configuration, and the port at the other
end of the resilient link does not have to support any resilience feature.
For more information about resilient links, see Chapter 4
Using
Resilience Features”.
Spanning Tree
Protocol and Rapid
Spanning Tree
Protocol
Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP)
are bridge-based systems that make your network more resilient to link
failure and also provide protection from network loops — one of the
major causes of broadcast storms.
STP allows you to implement alternative paths for network traffic in the
event of path failure and uses a loop-detection process to:
Discover the efficiency of each path.
Enable the most efficient path.
Disable the less efficient paths.
Enable one of the less efficient paths if the most efficient path fails.
RSTP is an enhanced version of the STP feature and is enabled by default.
RSTP can restore a network connection quicker than the legacy STP
feature. RSTP can detect if it is connected to a legacy device that only
supports IEEE 802.1D STP and will automatically downgrade to STP on
that particular port.
STP conforms to the IEEE Std 802.1D, 1998 Edition and RSTP conforms to
the IEEE Std 802.1w-2001.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI