Builders Edge 120032222001 Specification

Type
Specification
22" ROUND GABLE VENT
The 22" Round Gable Vent is a functional and decorative vent designed to provide unforced free air flow
ventilation of attics or similar spaces when used in conjunction with proper soffit ventilation practices.
Local ventilation codes apply when installing this unit.
FEATURES:
-Easy to install on all types of exteriors.
-Single unit body construction of vent housing.
-J-Channel eliminated
-Double baffles for increased weather resistance.
-Fully screened for complete insect protection.
-Finish trim ring adjusts for a range of siding thickness.
SPECIFICATIONS:
Material: Vent: UV stabilized copolymer; Color molded in; .100" nominal wall
Ring: UV stabilized copolymer; Color molded in; .100" nominal wall
Bae: Black PP; .025" wall
Screen: Fiberglass; 18x16 mesh
Paintable/Stainable HIPS available
Fabrication: Single piece molded unit
Bae and screen sealed to interior side of unit
Trim ring single piece molded unit
Attachment: Screw or nail directly to any surface.
Packaging: 1 assembly per box
Vent Free Area: 50 sq. in.
Rough Opening: 16" x 16"
Dimensions: See drawing below
Patent No: 5349799
22_round_gable_vent_spec.ai
Issued: 06/17/99
Revised: 10/11/10
3/4", 1", 1 1/4", 1 1/2"
SIDING
20 1/8" O.A. VENT
22" O.A. TRIM RING
(55.9 cm)
2"
23 13/16" O.A. FLANGE
(60.5cm)
  • Page 1 1

Builders Edge 120032222001 Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI