Backyard Discovery Ready Shed John Deere 8 x 8-feet Barn Setup Manual

Save this assembly manual for future reference in the event that

you need to order replacement parts.

READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING CONSTRUCTION.

INS-

817230019-A-8x8 J.D. BARN SHED DISASSEMBLY-ENG 4-6-17

Manufacturer: Backyard Discovery

3305 Airport Drive

Pittsburg, KS 66762

1-800-856-4445

READY SHED

8X8 JOHN DEERE

BARN SHED

DISASSEMBLY

MODEL: # 817230019

IMPORTANT!

READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.

BEFORE YOU BEGIN

• SAFETY FIRST

Your safety is what matters, follow the instructions fully to ensure it gets dissassembled correctly

and safely.

• SURFACE PREPARATION

To ensure proper disassembly you must uncrate your shed on a level firm surface.

• HANDLE WITH CARE

This crate is your shed, handle all parts with care as you follow the instructions to take it apart.

• DON'T THROW ANYTHING AWAY

Keep all parts during the disassembly until you are able to inventory the parts using the next Instruction

Manual found in your shed crate.

• DON'T SKIP ANY STEPS

This crate has been designed to keep it's parts from being damaged and from falling over.

Skipping steps could cause parts to fall and land on you or cause damage to your shed or

surrounding structures.

STOP!

DO NOT RETURN THIS PRODUCT TO STORE!

If you have questions or concerns,

please call 800-856-4445

or

email customerserv@backyarddiscovery.com

1

2

DISASSEMBLY TOOLS

REQUIRED

OTHER TOOLS WE SUGGEST

• Utility Knife

• 6' Ladder

• Gloves

• Phillips Bit Driver

• Drill

DON'T SKIP ANY STEPS

This crate has been designed to keep it's parts from being damaged and from falling over.

Skipping steps could cause parts to fall and land on you or cause damage to your shed or

surrounding structures.

•These instructions will take you step by step through the disassembly process.

•

Only remove screws shown in the current step, do not skip foward or take out any additional screws

until instructed to.

DO THIS ON BOTH SIDES.

SCREW PFH 8x3

(4 PLCS)

REMOVE

(2 PLCS)

3

REMOVE SCREW

(8 PLCS)

PARTS BEING REMOVED

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

NEXT: REMOVE SCREW

(2 PLS)

TOP VIEW

4

- FLOOR JOIST - W4L07736

1 1/2"x5 1/2"x89"

(2)

REMOVE

(2) RP1 - ROOF PANEL - W2A02123

CAUTION

LOOSE PARTS BEHIND, MOVE WITH

CAUTION.

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

PARTS BEING REMOVED

TOP VIEW

REMOVE SCREW

(8 PLCS)

5

- FLOOR JOIST - W4L07736

1 1/2"x5 1/2"x89"

(2)

REMOVE JOIST

CAUTION

LOOSE PARTS BEHIND, MOVE WITH

CAUTION.

PARTS BEING REMOVED

6

- FILLER BOARD - W4L07701

1"x3 3/8"x21 3/8" (24x86x543)

(4)

- VERTICAL TRIM - W4L07674

5/8"x3 3/8"x44 1/2" (16x86x1130)

(4)

- ANGLED ROOF TRIM - W4L07666

5/8"x3 3/8"x36" (16x86x914)

(8)

- SIDE VERTICAL TRIM - W4L07665

5/8"x2 3/8"x44 1/2" (16x60x1130)

(4)

LEFT SIDE

RIGHT SIDE

ANGLED ROOF TRIM

(8 PCS)

VERTICAL TRIM

(4 PCS)

FILLER BOARD

(4 PCS)

SIDE VERTICAL TRIM

(4 PCS)

REMOVE SCREW

(2 PLCS)

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

PARTS BEING REMOVED

7

LEFT SIDE

RIGHT SIDE

REMOVE SCREW

(1 PLCS)

HEADER

(1 PCS)

TOP DOOR TIRM

(1 PCS)

DRIP EDGE

(1 PCS)

- DRIP EDGE - W4L07741

1 7/16"x1 15/16"x62 3/4"

(1)

- HEADER - W4L07739

1 1/2"x3 1/2"x58 1/2"

(1)

- TOP DOOR TIRM - W4L07740

1 7/16"x3 3/8"x62 3/4"

(1)

REMOVE SCREW

(2 PLCS)

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

PARTS BEING REMOVED

8

REMOVE

LEFT SIDE

(1) RP1 - ROOF PANEL - W2A02123

CAUTION

LOOSE PARTS BEHIND, MOVE WITH

CAUTION.

PARTS BEING REMOVED

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

DIAMOND PLATE THRESHOLD

(1 PCS)

- DIAMOND PLATE THRESHOLD - A4M00837

(1)

(1) WP2 - REAR CENTER WALL PANEL - W2A02119

REMOVE

LEFT SIDE

9

REMOVE SCREW

(2 PLCS)

PARTS BEING REMOVED

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

(1) WP5 - UNIVERSAL RIGHT

WALL PANEL - W2A02122

(1) WP4 - UNIVERSAL LEFT

WALL PANEL - W2A02121

REMOVE

LEFT SIDE

10

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

PARTS BEING REMOVED

REMOVE SCREW

(2 PLCS)

11

(1) RP1 - ROOF PANEL - W2A02123

REMOVE

RIGHT SIDE

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

PARTS BEING REMOVED

REMOVE SCREW

(2 PLCS)

12

RIGHT SIDE

(1) WP6 - FRONT LEFT

WALL PANEL - W2A02138

REMOVE

REMOVE SCREW

(1 PLCS)

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

PARTS BEING REMOVED

13

REMOVE

(1) LEFT DOOR - W2A02140

RIGHT SIDE

CAUTION

LOOSE PARTS, MOVE WITH CAUTION.

PARTS BEING REMOVED

REMOVE SCREW

(2 PLCS)

(1) WP7 - FRONT RIGHT

WALL PANEL - W2A02139

REMOVE

LEFT SIDE

14

CAUTION

LOOSE PARTS BEHIND, MOVE WITH

CAUTION.

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

PARTS BEING REMOVED

REMOVE SCREW

(2 PLCS)

15

REMOVE

(1) RIGHT DOOR - W2A02141

LEFT SIDE

PARTS BEING REMOVED

SHINGLES

- 2" CONCRETE BLOCK - CB000002

(1)

- 4" CONCRETE BLOCK - CB000001

(1)

- JOHN DEERE VENT (8x16) (1)

- VENT (8x16) - A4M00771(1)

RIDGE CAPS

REMOVE ALL LOOSE PARTS

LEFT SIDE

16

STOP

ONLY REMOVE LOOSE PARTS AND

MOVE TO NEXT STEP.

•Only remove item's shown in the current step, do not skip foward or take out any additional parts until instructed to.

PARTS BEING REMOVED

17

- FLOOR JOIST - W4L07736

1 1/2"x5 1/2"x89"

(5)

- FASCIA BOARD - W4L07672

5/8"x2 3/8"x87 1/4" (16x60x2216)

(2)

RIGHT SIDE

REMOVE SCREW

(6 PLCS)

FLOOR JOIST

(5 PCS)

FASCIA BOARD

(2 PCS)

CAUTION

LOOSE PARTS, MOVE WITH CAUTION.

PARTS BEING

REMOVED

SHINGLES

18

- 7/16" OSB GABLE BRACE - W4L07667

7/16"x6 1/8"x11" TREATED

(6)

- LEVELING SHINGLE 12 x 7.5 - A6P0027-L

12 x 7.5

(4)

REMOVE ALL LOOSE PARTS

- 2" CONCRETE BLOCK - CB000002

(1)

- 4" CONCRETE BLOCK - CB000001

(1)

PARTS BEING REMOVED

•Only remove screws shown in the current step, do not skip foward or take out any additional screws until instructed to.

CAUTION

REMOVING BOARD WILL

REDUCE STABILTY.

TOP VIEW

REMOVE SCREW

(8 PLCS)

19

- 5/8" FLOOR SHEATHING - W4L07738

5/8"x43"x92"

(1)

- 5/8" FLOOR SHEATHING - W4L07737

5/8"x48"x92"

(1)

REMOVE

Page is loading ...

Backyard Discovery Ready Shed John Deere 8 x 8-feet Barn Setup Manual

Backyard Discovery Ready Shed John Deere 8 x 8-feet Barn Setup Manual

Related papers

Other documents