Gamber-Johnson 7160-1275-21 Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
7160-1275-21
Type
Installation guide

This manual is also suitable for

Gamber-Johnson 7160-1275-21 is a cradle designed to be used with a variety of Gamber-Johnson mounting systems. It enables docking and undocking of Panasonic FZ-T1 Tablets. The cradle features a barrel key lock for added security, a slam latch for quick and easy docking, upper walls to guide the tablet into place, a cable restraint to keep cables organized, and an AMPS hole pattern for flexible mounting options. The cradle is certified to meet various regulatory standards, including EN 55032, FCC 47 CFR Part 15B Class B, EN 50581, EN62368-1, IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No.

Gamber-Johnson 7160-1275-21 is a cradle designed to be used with a variety of Gamber-Johnson mounting systems. It enables docking and undocking of Panasonic FZ-T1 Tablets. The cradle features a barrel key lock for added security, a slam latch for quick and easy docking, upper walls to guide the tablet into place, a cable restraint to keep cables organized, and an AMPS hole pattern for flexible mounting options. The cradle is certified to meet various regulatory standards, including EN 55032, FCC 47 CFR Part 15B Class B, EN 50581, EN62368-1, IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No.

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
REV. B
INST-921
This instruction sheet is for the Panasonic FZ-T1 Tablet cradle only. For instructions on
features, set-up, and operation of the computer, please refer to the manual provided by
Panasonic with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided with each
individual product.
This instruction sheet is for the following products:
Item No. 7160-1275-20(-P)(-E)
CRADLE, W/LOCK(External Power Supply sold separately)
Item No. 7160-1275-10(-P)(-E)
CRADLE (External Power Supply sold separately)
1 /4
INSTALLATION INSTRUCTIONS
Product
Revision
Form
Printing Spec:
PS-001
7160-1275
PANASONIC FZ-T1 TABLET CRADLE
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Barrel Key Lock
FEATURE IDENTIFICATION
2 / 4
Upper Walls
Cable Restraint
Slam Latch
Part#/Serial# Label
Amps Hole Pattern
#8-32 x 0.625" or
M4-0.7 x 16mm
hardware provided
Warranty Label
DOCKING AND UNDOCKING THE COMPUTER
OPERATION - DOCKING
1. Insert the bottom of the tablet
into the bottom cavity of the
dock. The walls on the dock will
guide the tablet into place.
2. Rotate the top of the tablet
into the dock, overcoming the
resistance until the Release
Button returns to the "Latched"
position. The slam latch will
come over the front of the tablet.
There will also be an audible
confirmation as the latch system
springs downward.
3. Optional - With the dock in the
"Latched" position, turn the lock
to the "LOCKED" position (CW).
OPERATION - UNDOCKING
1. Turn the lock to the
"UNLOCKED" position (CCW).
2. With your hand on the top of
the tablet, push up on the blue
Release Button until the
computer is free to move forward.
While the dock is "Un-Latched",
pull the top of the tablet forward
until it clears the dock. This can
be done right or left handed.
3. Remove the computer by
pulling it away from the dock.
3 / 4
Insert Bottom First
Rotate Top
"Un-Locked" Position
"Latched" Position
"Locked" Position
Gamber-Johnson LLC, 3001 Borham Ave.,
Stevens Point, WI, 54481, USA, 715-344-3482
Regulatory Certification Information
Regulatory Model #: 7160-1275
GJ Model #'s & Description:
7160-1275-20(-P)(-E) Cradle-Panasonic FZ-T1 Tablet- W/Lock
7160-1275-10(-P)(-E) Cradle-Panasonic FZ-T1 Tablet
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions. (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
4/4
Certifications:
EN 55032:2012/AC: 2013
•
FCC 47 CFR Part 15B Class B
•
EN 50581:2012 ROHS2 Directive 2011/65/EU
•
EN62368-1:2014+A11:2017
•
IEC 62368-1:2014
•
UL 62368-1:2014
•
CAN/CSA C22.2 No. 62368-1:2014
•
UN ECE R10: 2014 Add. 9, Revison 5
•
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Gamber-Johnson 7160-1275-21 Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
7160-1275-21
Type
Installation guide
This manual is also suitable for

Gamber-Johnson 7160-1275-21 is a cradle designed to be used with a variety of Gamber-Johnson mounting systems. It enables docking and undocking of Panasonic FZ-T1 Tablets. The cradle features a barrel key lock for added security, a slam latch for quick and easy docking, upper walls to guide the tablet into place, a cable restraint to keep cables organized, and an AMPS hole pattern for flexible mounting options. The cradle is certified to meet various regulatory standards, including EN 55032, FCC 47 CFR Part 15B Class B, EN 50581, EN62368-1, IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents