Gamber-Johnson Quick Release Keyboard Cradle for the Rugged Lite Keyboard Installation guide

Brand: Gamber-Johnson

Model: Quick Release Keyboard Cradle for the Rugged Lite Keyboard

Type: Installation guide

This manual is also suitable for

Samsung Galaxy Tab Active Pro Docking Station, Rugged Lite Backlit Keyboard, 2-in-1 Attachable Keyboard, and Quick Release Keyboard Cradle

Gamber-Johnson Quick Release Keyboard Cradle for the Rugged Lite Keyboard is a versatile device designed to securely hold and protect your keyboard in various scenarios. Its key features include:

Quick release mechanism: The cradle allows for quick and easy docking and undocking of the keyboard, making it convenient for mobile use or when you need to remove the keyboard for cleaning or storage.
Adjustable mounting options: With its VESA 75mm stud pattern and #8-32 nylok nut hardware, the cradle can be mounted on various surfaces, providing flexibility in positioning your keyboard for optimal comfort and efficiency.

Gamber-Johnson Quick Release Keyboard Cradle for the Rugged Lite Keyboard is a versatile device designed to securely hold and protect your keyboard in various scenarios. Its key features include:

Quick release mechanism: The cradle allows for quick and easy docking and undocking of the keyboard, making it convenient for mobile use or when you need to remove the keyboard for cleaning or storage.
Adjustable mounting options: With its VESA 75mm stud pattern and #8-32 nylok nut hardware, the cradle can be mounted on various surfaces, providing flexibility in positioning your keyboard for optimal comfort and efficiency.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Product Mounting Disclaimer

Rev. A

INST-965

This instruction sheet is for the Rugged Lite Keyboard Cradle only. For instructions on

features, set-up, and operation of the Keyboard, please refer to the manual provided with

7160-1449.

This cradle is designed to be compatible with the Gamber-Johnson Rugged Lite Keyboard.

Installation instructions for other Gamber-Johnson products are provided with each individual

product.

This cradle is designed to be a quick release holder or a permanent fixture for the keyoard.

Please see page 3 for operational instructions.

1 / 3

INSTALLATION INSTRUCTIONS

Product

Revision

Form

Printing Spec:

PS-001

7160-1470-00

RUGGED LITE KEYBOARD CRADLE

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Front Hooks

Latch

and

Release

Rear Walls

Provides Support

Part Number Label

VESA 75mm Stud Pattern

#8-32 nylok nut hardware provided

Metal Bracket

FEATURE IDENTIFICATION

2 / 3

DOCKING AND UNDOCKING THE KEYBOARD

OPERATION - DOCKING

1. Insert the front of the Keyboard into the Front Hooks, using the front pockets on the Keyboard to

guide it into place with the Front Hooks.

2. Rotate the rear of the Keyboard into the cradle. Push down in the center of the Keyboard, near

the Gamber-Johnson logo, overcoming the resistance until the blue Latch snaps over the rear

pocket of the Keyboard. There will be an audible confirmation from the Latch.

3 / 3

Insert Bottom First

Rotate Top

Push to latch

OPTIONAL - NO REMOVAL OF KEYBOARD

1. Use (2) supplied #6-32 x 0.500" screws to

permanently attach the Keyboard to the

cradle. Once latched, screw the Keyboard

through the two rear holes in the Keyboard.

Do not over tighten.

2. Remove (2) screws when Keyboard needs

to be removed.

OPERATION - UNDOCKING

1. With your hand on the rear of the Keyboard,

push down on the blue Release until the

Keyboard is free to move upward. While the

Keyboard is "Un-Latched", pull the rear of the

Keyboard upward until it clears the cradle. This

can be done right or left handed.

Insert #6 Screws

(2) provided with cradle

Push

Back

Pull Up

Gamber-Johnson Quick Release Keyboard Cradle for the Rugged Lite Keyboard Installation guide

Brand: Gamber-Johnson

Model: Quick Release Keyboard Cradle for the Rugged Lite Keyboard

Type: Installation guide

This manual is also suitable for

Samsung Galaxy Tab Active Pro Docking Station, Rugged Lite Backlit Keyboard, 2-in-1 Attachable Keyboard, and Quick Release Keyboard Cradle

Gamber-Johnson Quick Release Keyboard Cradle for the Rugged Lite Keyboard is a versatile device designed to securely hold and protect your keyboard in various scenarios. Its key features include:

Quick release mechanism: The cradle allows for quick and easy docking and undocking of the keyboard, making it convenient for mobile use or when you need to remove the keyboard for cleaning or storage.
Adjustable mounting options: With its VESA 75mm stud pattern and #8-32 nylok nut hardware, the cradle can be mounted on various surfaces, providing flexibility in positioning your keyboard for optimal comfort and efficiency.

Download PDF

report

Gamber-Johnson Quick Release Keyboard Cradle for the Rugged Lite Keyboard Installation guide

This manual is also suitable for

Gamber-Johnson Quick Release Keyboard Cradle for the Rugged Lite Keyboard Installation guide

Related papers

Other documents