STARVILLE DMX-Master MK II ENC User manual

Brand: STARVILLE

Model: DMX-Master MK II ENC

Category: Stroboscopes & disco lights

Type: User manual

DMX-Master I,

DMX-Master MK II ENC

DMX controller

user manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

02.06.2016, ID: 168962, 236071 | SW B3.0V3.2

Table of contents

1 General information................................................................................................................................. 5

1.1 Further information........................................................................................................................... 6

1.2 Notational conventions.................................................................................................................... 7

1.3 Symbols and signal words............................................................................................................... 9

2 Safety instructions.................................................................................................................................. 10

3 Features....................................................................................................................................................... 14

4 Installation.................................................................................................................................................. 16

5 Setup.............................................................................................................................................................. 18

6 Connections and controls................................................................................................................... 19

7 Basics............................................................................................................................................................. 31

8 Operating.................................................................................................................................................... 34

8.1 Introduction....................................................................................................................................... 34

8.2 Enabling programming mode..................................................................................................... 34

8.3 Programming scenes...................................................................................................................... 35

8.4 Programming chase........................................................................................................................ 42

Table of contents

DMX-Master I, DMX-Master MK II ENC

8.5 Assigning / reversing DMX channels........................................................................................ 47

8.6 Calling up scenes.............................................................................................................................. 55

8.7 Calling chases.................................................................................................................................... 57

8.8 The MIDI functions........................................................................................................................... 59

8.9 Sending data...................................................................................................................................... 62

8.10 Receiving data................................................................................................................................ 63

9 Technical specifications....................................................................................................................... 64

10 Plug and connection assignment.................................................................................................... 65

11 Protecting the environment.............................................................................................................. 66

Table of contents

DMX controller

1 General information

This manual contains important instructions for the safe operation of the unit. Read and follow

the safety instructions and all other instructions. Keep the manual for future reference. Make

sure that it is available to all those using the device. If you sell the unit please make sure that

the buyer also receives this manual.

Our products are subject to a process of continuous development. Thus, they are subject to

change.

General information

DMX-Master I, DMX-Master MK II ENC

1.1 Further information

On our website (www.thomann.de) you will find lots of further information and details on the

following points:

Download This manual is also available as PDF file for you to download.

Keyword search Use the search function in the electronic version to find the topics of

interest for you quickly.

Online guides Our online guides provide detailed information on technical basics

and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service If you have any problems with the device the customer service will

gladly assist you.

General information

DMX controller

1.2 Notational conventions

This manual uses the following notational conventions:

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

Texts and values displayed on the device are marked by quotation marks and italics.

Examples: ‘24ch’, ‘OFF’.

Letterings

Displays

General information

DMX-Master I, DMX-Master MK II ENC

The individual steps of an instruction are numbered consecutively. The result of a step is

indented and highlighted by an arrow.

Example:

1. Switch on the device.

2. Press [Auto].

ðAutomatic operation is started.

3. Switch off the device.

References to other locations in this manual are identified by an arrow and the specified page

number. In the electronic version of the manual, you can click the cross-reference to jump to

the specified location.

Example: See

‘Cross-references’ on page 8.

Instructions

Cross-references

General information

DMX controller

1.3 Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are

used in this manual.

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Warning signs Type of danger

Warning – danger zone.

General information

DMX-Master I, DMX-Master MK II ENC

2 Safety instructions

This device is used to control spotlights, dimmers, lighting effects equipment, Moving Heads

or other DMX-controlled devices. The device is designed for professional use and is not suit‐

able for use in households. Use the device only as described in this user manual. Any other use

or use under other operating conditions is considered to be improper and may result in per‐

sonal injury or property damage. No liability will be assumed for damages resulting from

improper use.

This device may be used only by persons with sufficient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

device only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

DMX controller

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

Safety

Safety instructions

DMX-Master I, DMX-Master MK II ENC

NOTICE!

External power supply

The device is powered by an external power supply. Before connecting the

external power supply, ensure that the input voltage (AC outlet) matches the

voltage rating of the device and that the AC outlet is protected by a residual cur‐

rent circuit breaker. Failure to do so could result in damage to the device and pos‐

sibly the user.

Unplug the external power supply before electrical storms occur and when the

device is unused for long periods of time to reduce the risk of electric shock or

fire.

NOTICE!

Risk of fire

Do not cover the device nor any ventilation slots. Do not place the device near

any direct heat source. Keep the device away from naked flames.

Safety instructions

DMX controller

NOTICE!

Operating conditions

This device has been designed for indoor use only. To prevent damage, never

expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and

strong vibrations.

NOTICE!

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react

with the coating of your parquet, linoleum, laminate or PVC floor and after some

time cause permanent dark stains.

In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad

floor protectors or a carpet.

Safety instructions

DMX-Master I, DMX-Master MK II ENC

3 Features

Special features of the device:

n192 DMX channels

n12 units with up to 16 DMX channels operable

n30 banks with 8 freely programmable scenes

nSix Chase programmes with up to 240 scenes from 30 banks

nEight faders for manual control

nAll data interchangeable between two units

nAuto programmes (scenes and chases), controlled by Wait Time knob (or Tap Sync) and

Fade Time knob

nStepless fade time setting (0-30 seconds)

nTwo encoder wheels for precise adjustment of PAN and TILT (DMX Master MK-II ENC)

nFine tuning for PAN and TILT

nInverted DMX channels allow reverse output control for the sliders

nAssigned or reversed DMX channel preview

n8 / 16 channel mode for assigned or reversed DMX channels

nBlackout master

nStand-alone mode

Features

DMX controller

nManual overriding of scenes in chases

nSound control

nMIDI control for banks, chases and blackout

nLCD

nDMX polarity adjustable

nMemory retention on power failure

nAuto addressing

Features

DMX-Master I, DMX-Master MK II ENC

4 Installation

NOTICE!

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react

with the coating of your parquet, linoleum, laminate or PVC floor and after some

time cause permanent dark stains.

In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad

floor protectors or a carpet.

Unpack and carefully check that there is no transportation damage before using the unit. Keep

the equipment packaging. To fully protect the device against vibration, dust and moisture

during transportation or storage use the original packaging or your own packaging material

suitable for transport or storage, respectively.

Installation

DMX controller

Wiring diagram for fog

machines

Installation

DMX-Master I, DMX-Master MK II ENC

5 Setup

Create all connections while the device is off. Use the shortest possible high-quality cables for

all connections. Take care when running the cables to prevent tripping hazards.

Connect the included power adapter to the 9V connector of the unit and then plug the power

adapter into a wall outlet.

Turn on the device using the main switch on the rear panel. Turn on the device using the main

switch at the back side. After turning the device on the displays shows the software version

and the operation mode for a short time. The related display LEDs light up.

Connecting the power supply

Turning the unit on

Setup

DMX controller

6 Connections and controls

Front panel DMX Master I

Connections and controls

DMX-Master I, DMX-Master MK II ENC

Front panel DMX Master MK-II ENC

Connections and controls

DMX controller

Page is loading ...

STARVILLE DMX-Master MK II ENC User manual

Brand: STARVILLE

Model: DMX-Master MK II ENC

Category: Stroboscopes & disco lights

Type: User manual

Download PDF

report

STARVILLE DMX-Master MK II ENC User manual

STARVILLE DMX-Master MK II ENC User manual

Other documents