Toshiba Computer Monitor 65HC15 User manual

Brand: Toshiba

Model: Computer Monitor 65HC15

Category: LCD TVs

Type: User manual

This manual is also suitable for

65HC15

(E) 65HC15

65HC15

Owner's Record

The model number and serial number are on the back

of your monitor. Record these numbers in the spaces below.

Refer to these numbers whenever you communicate

with your Toshiba dealer about this monitor.

Model: 65HC15

Serial No.:

Projection Monitor

OWNER’S MANUAL

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

#01E_01_65HC15 5/20/05, 4:22 PM1

Black

23566732

(E) 65HC15

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Dear Customer,

Thank you for purchasing this Toshiba monitor. This manual

will help you use the many exciting features of your new

monitor. Before operating the monitor, please read this

manual completely, and keep it nearby for future reference.

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

NOTICE OF POSSIBLE ADVERSE EFFECTS ON

MONITOR PICTURE DISPLAY

If a fixed (non-moving) pattern or image remains on the

monitor screen for extended periods of time, the image can

become permanently ingrained in the cathode ray tube(s) of

the monitor and cause subtle but permanent ghost images.

This type of damage is NOT COVERED BY YOUR

WARRANTY. See item 33 on page 4 for details.

ENERGY STAR

qualified monitor. Products

that earn the ENERGY STAR prevent green

house gas emissions by meeting strict energy

efficiency guidelines set by the U.S.

Environmental Protection Agency and the U.S.

Department of Energy. ENERGY STAR and the

ENERGY STAR mark are registered U.S. marks.

The lightning symbol in the triangle tells you that the

voltage inside this product may be strong enough to

cause an electric shock. DO NOT TRY TO SERVICE

THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that

important operating and maintenance instructions

follow this symbol.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NOTE: NEVER CONNECT THIS MONITOR

TO A PERSONAL COMPUTER (PC).

THIS MONITOR IS NOT INTENDED FOR USE WITH A PC.

Child Safety

It Makes A Difference

Where Your TV/monitor

Stands

Congratulations on your purchase! As you enjoy

your new TV/monitor, keep these safety tips in mind:

The Issue

If you are like most consumers, you have a TV/monitor in your

home. Many homes, in fact, have more than one TV/monitor.

The home theater entertainment experience is a growing trend,

and larger TVs/monitors are popular purchases; however, they

are not always supported on the proper TV/monitor stands.

Sometimes TVs/monitors are improperly secured or

inappropriately situated on dressers, bookcases, shelves, desks,

audio speakers, chests, or carts. As a result, TVs/

monitors may fall over, causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home

Entertainment Support Safety

Committee, comprised of TV/

monitor and consumer electronics

furniture manufacturers, to advocate

children’s safety and educate

consumers and their families about TV/

monitor safety.

Tune Into Safety

 One size does NOT fit all! Use appropriate furniture

large enough to support the weight of your TV/monitor (and

other electronic components).

Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly into

the TV/monitor).

Carefully read and understand the other enclosed

instructions for proper use of this product.

Do not allow children to climb on or play with furniture

and TVs/monitors.

Avoid placing any item on top of your TV/monitor (such as a

VCR, remote control, or toy) that a curious child may reach for.

Remember that children can become excited while watching

a program and can potentially push or pull a TV/monitor over.

Share our safety message about this hidden hazard of the

home with your family and friends. Thank you!

NOTE: THIS MONITOR

DOES NOT CONTAIN A TUNER.

A set-top box (i.e., an analog or digital receiver/tuner,

cable box, or satellite receiver) is required to receive

analog or digital antenna broadcast, cable, or satellite

signals. For more information, refer to the applicable

connection instructions in this owner’s manual.

2500 Wilson Blvd.

Arlington, VA 22201 U.S.A.

Tel. 703-907-7600 Fax 703-907-7690

www.CE.org

CEA is the Sponsor, Producer and

Manager of the International CES

#01E_02-05_65HC15 5/20/05, 4:22 PM2

Black

(E) 65HC15

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all

warnings when installing your monitor:

16) Never modify this equipment. Changes or modifications

may void: a) the warranty, and b) the user’s authority to

operate this equipment under the rules of the Federal

Communications Commission.

17) DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT

DAMAGE! Never place the monitor

on an unstable cart, stand, or table. The

monitor may fall, causing serious personal

injury, death, or serious damage to the monitor.

18) Never place or store the monitor in direct

sunlight; hot, humid areas; areas

subject to excessive dust or vibration;

or locations with temperatures at or

below 41°F (5°C).

19) Always place the monitor on the floor

or a sturdy, level, stable surface that

can support the weight of the unit.

20) Never place items such as vases,

aquariums, or candles on top of the monitor.

21) Never block or cover the slots or

openings in the monitor cabinet

back, bottom, and sides. Never

place the monitor:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains,

or walls; or

• in a confined space such as a

bookcase, built-in cabinet, or any

other place with poor ventilation.

The slots and openings are provided

to protect the monitor from

overheating and to help maintain

reliable operation of the monitor.

22) Never allow anything to rest on or roll over the power

cord, and never place the monitor where the power cord is

subject to wear or abuse.

23) Never overload wall outlets and

extension cords.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with a dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer’s instructions.

8) Do not install near any heat

sources such as radiators,

heat registers, stoves, or other

apparatus (including amplifiers)

that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician

for replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and

the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during

lightning storms or when

unused for long periods

of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power supply

cord or plug is damaged, liquid has

been spilled or objects have fallen into

the apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

15) CAUTION: To reduce the risk of electric shock, do not

use the polarized plug with an extension cord, receptacle,

or other outlet unless the blades can be inserted

completely to prevent blade exposure.

Wide plug

QUALIFIED

SERVICE

TECHNICIAN

#01E_02-05_65HC15 5/20/05, 4:22 PM3

Black

(E) 65HC15

Ground clamp

Antenna discharge unit

(NEC Section 810-20)

Grounding conductors

(NEC Section 810-21)

Power service grounding

electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

QUALIFIED

SERVICE

TECHNICIAN

24) Always operate this equipment from

a 120 VAC, 60 Hz power source only.

25) Always make sure the antenna system is properly

grounded to provide adequate protection against voltage

surges and built-up static charges (see Section 810 of the

National Electric Code).

26) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in

a position where your body (or any item you are in contact

with, such as a ladder or screwdriver) can accidentally

touch overhead power lines. Never locate the antenna

near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during

lightning activity:

a) an antenna system; or b) cables, wires, or any home

theater component connected to an antenna or phone

system.

Care

For better performance and safer operation of your TOSHIBA

monitor, follow these recommendations and precautions:

27) Always sit approximately 10–25 feet away from the monitor

and as directly in front of it as possible. The picture can

appear dull if you sit too far to the left or right of the monitor,

or if sunlight or room lights reflect on the screen. Turn the

monitor off to check for reflections on the screen, and then

remove the source of reflections while viewing the monitor.

28) Always unplug the monitor before

cleaning. Never use liquid or

aerosol cleaners.

29) WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind

into the monitor cabinet slots.

30) [This item applies to projection monitors only.] If the air

temperature rises suddenly (for example, when the

monitor is first delivered), condensation may form on the

lenses. This can make the picture appear distorted or the

color appear faded. If this happens, turn off the monitor

for 6 to 7 hours to allow the condensation to evaporate.

31)For added protection of your monitor from lightning and

power surges, always unplug the power cord if you leave

the monitor unattended or unused for long periods of time.

32) During normal use, the monitor may

make occasional snapping or popping

sounds. This is normal, especially

when the unit is being turned on or

off. If these sounds become frequent

or continuous, unplug the power cord

and contact a Toshiba Authorized Service Center.

33)

Possible Adverse Effects on Monitor Picture Display: If a

fixed (non-moving) pattern or image remains on the monitor

screen for extended periods of time, the image can become

permanently ingrained in the cathode ray tube(s) of the monitor

and cause subtle but permanent ghost images. This type of

damage is NOT COVERED BY YOUR WARRANTY.

Never leave the monitor on for extended periods of time

while it is displaying the following images or formats:

• Fixed Images, including but not limited to PIP/POP

windows, closed captions, video game patterns, TV station

logos, stock tickers, and websites.

•

Special Formats that do not use the entire screen, including

but not limited to widescreen or letterbox format media

viewed on a 4:3 aspect ratio display (with gray or black bars at

the top and bottom of the screen); or 4:3 aspect ratio format

media viewed on a widescreen/16:9 aspect ratio display (with

gray or black bars on the left and right sides of the screen).

Service

34) WARNING: RISK OF ELECTRIC

SHOCK! Never attempt to service the

monitor yourself. Opening

and removing the covers may

expose you to dangerous voltage or

other hazards. Refer all servicing to

a Toshiba Authorized Service Center.

35) If you have the monitor serviced:

• Ask the service technician to use only replacement parts

specified by the manufacturer.

• Upon completion of service, ask

the service technician to perform

routine safety checks to determine

that the monitor is in safe

operating condition.

36)When the monitor reaches the end of its useful life, ask a

qualified service technician to properly dispose of the

monitor. Improper disposal may result in a picture tube

implosion and possible personal injury.

#01E_02-05_65HC15 5/20/05, 4:22 PM4

Black

(E) 65HC15

Important Safety Precautions for Split Cabinet Feature

Toshiba monitor model 65HC15 has a split cabinet feature

that allows disassembly of the cabinet into two sections

during installation.

For details, please refer to the insert titled “Disassembly/

Reassembly Instructions for Split Cabinet Feature”

included with this owner’s manual in the accessory pack.

If you do not have the insert, you can download a copy of

it from our Web site at www.toshiba.com/tacp or call

1-800-631-3811.

WARNING: If you split the cabinet for any

purpose, NEVER energize the bottom section

until it is completely and properly installed.

Energizing the disassembled bottom section and

subjecting it to intentional misuse (for example, exposing it to

a foreign object) creates the potential for an electrical shock

hazard that could result in death or serious injury.

CAUTION: If you use the split cabinet feature, ALWAYS

handle and treat the top section of the monitor cabinet,

which contains a glass mirror, with great care. If subjected

to excessive mechanical abuse (for example, if bumped or

dropped), the mirror may break, creating exposed glass

fragments with sharp edges. Contact with these glass

fragments may result in injury.

Installation, Care, and Service

CAUTION: The split cabinet feature allows disassembly of

the cabinet into two sections during installation. If you use

the split cabinet feature, follow these precautions while

the two sections of the monitor cabinet are disassembled:

1) Always handle and treat the top section of the monitor

cabinet (with the viewing screen), which contains a glass

mirror, with great care. If subjected to excessive mechanical

abuse (for example, if bumped or dropped), the mirror may

break, creating exposed glass fragments with sharp edges.

Contact with these glass fragments may result in injury.

2) Never temporarily locate the disassembled bottom section

in an area where it may be exposed to foreign objects or

abuse (for example, areas where children may be playing,

where items may fall on top of the unit, or where liquids

may spill into the unit). Failure to follow this instruction

may result in damage to the optic components of the

monitor. SUCH DAMAGE IS NOT COVERED UNDER THE

TOSHIBA LIMITED WARRANTY.

3) Always keep the top and bottom sections of the monitor

cabinet in an upright position while disassembled. Failure

to follow this instruction may result in damage to the

monitor, including but not limited to the optic components,

cabinet, bezel, and glass mirror. SUCH DAMAGE IS NOT

COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

4) Never energize the bottom section of the

monitor cabinet while disassembled.

Failure to follow this instruction could

result in death or serious injury.

5) Never place anything on top of the disassembled bottom

section of the monitor cabinet. Failure to follow this

instruction may result in damage to the optic components.

SUCH DAMAGE IS NOT COVERED UNDER THE

TOSHIBA LIMITED WARRANTY.

6) Never store or transport the unit while it is disassembled.

Failure to follow this instruction may result in damage to the

monitor, including but not limited to the optic components,

cabinet, bezel, and glass mirror. SUCH DAMAGE IS NOT

COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

FCC compliance information

Federal Communications Commission (FCC)

This equipment complies with Part 15 of the FCC rules.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B device, pursuant to

Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference

in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by removing and applying power

to the equipment, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Changes or modifications to this equipment not expressly

approved by Toshiba could void the user’s authority to

operate this equipment.

#01E_02-05_65HC15 5/20/05, 4:22 PM5

Black

(E) 65HC15

Important Safety Information ............................. 2-5

Introduction................................................................ 7

Welcome to Toshiba......................................................... 7

Exploring your new monitor ............................................ 7

Connecting your Monitor ........................................ 8

Connecting a VCR .......................................................... 9

Connecting a cable converter box and VCR ................... 10

Connecting a DVD player or satellite receiver and

a VCR............................................................................ 11

Connecting a DVD player with ColorStream

(component video) and a VCR ...................................... 12

Connecting a DTV receiver/set-top box with

ColorStream

(component video) and a VCR ................ 13

Connecting two VCRs ................................................... 14

Connecting a camcorder ................................................ 14

Connecting an HDMI™ or a DVI device to

the HDMI input ........................................................... 15

Controlling infrared remote-controlled devices

through the monitor (IR pass-through).......................... 16

Connecting an audio system .......................................... 17

Using the remote control ...................................... 18

Preparing the remote control for use .............................. 18

Installing the remote control batteries ............................ 18

Remote control effective range ....................................... 18

Learning about the remote control ................................. 19

Using the remote control to operate your other devices .. 20

Remote control function key chart.......................... 21

Programming the remote control to operate your other

devices ........................................................................... 22

Remote control codes .................................................... 22

Setting up your Monitor ........................................ 24

Turning on the Monitor................................................. 24

Learning about the menu system ................................... 24

Changing the on-screen display language ....................... 25

Adjusting the color convergence..................................... 25

Operating your Monitor ......................................... 27

Viewing the wide-screen picture formats

(480i, 480p, and 1080i signals only) ........................... 27

Selecting the picture size ......................................... 27

Scrolling the TheaterWide

picture

(TheaterWide 2 and 3 only) ................................... 29

Using the AUTO ASPECT feature ......................... 30

Using the POP double-window feature .......................... 31

Swapping the main and POP pictures ..................... 32

Switching the speaker sound

(main or POP program).......................................... 32

Double-Window aspect ratio .................................. 32

Using the LOCKS menu ............................................... 33

Entering the PIN code ............................................ 33

If you cannot remember your PIN code .................. 33

Using the V-CHIP menu ............................................... 33

ENABLE BLOCKING .......................................... 34

TV RATING (Independent rating system for

broadcasters) ........................................................... 34

MPAA RATING (Independent rating system for

movies) ................................................................... 35

BLOCKING OPTION.......................................... 35

Changing the PIN code ................................................. 36

Adjusting the picture ..................................................... 36

Selecting the picture mode ...................................... 36

Adjusting the picture quality ................................... 37

Saving your new preferences ................................... 37

Selecting the color temperature ............................... 38

Using the CableClear

DNR feature ....................... 38

Resetting your picture setting adjustments .............. 39

Selecting the display format

(for 480p signals only) ............................................ 39

Selecting the cinema mode...................................... 39

Selecting the video input source ..................................... 40

Labeling the video input sources .................................... 40

Using the closed caption feature ..................................... 41

Setting the sleep timer.................................................... 42

Setting the clock ............................................................ 42

Adjusting the sound ....................................................... 43

Muting the sound ................................................... 43

Using the WOW

surround sound feature ................ 43

Adjusting the sound quality .................................... 44

Resetting your audio adjustments ........................... 44

Using the StableSound

feature .............................. 45

Turning off the built-in speakers ............................. 45

Selecting the Audio OUT sound ............................. 46

Selecting the background of the menu display ............... 46

Displaying monitor status information on-screen........... 47

Understanding the last mode memory feature ................ 47

Appendix................................................................... 48

Specifications ................................................................. 48

Tr oubleshooting ............................................................. 49

Limited United States Warranty ..................................... 50

Index .......................................................................... 51

#01E_06_65HC15 5/20/05, 4:22 PM6

Black

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

(E) 65HC15

INPUT

EXITMENU

VOLUME

VIDEO

S-VIDEO

AUDIO

L/MONO

VIDEO 3 IN

OUT 1

OUT 2

Introduction

Welcome to Toshiba

Thank you for purchasing this Toshiba Monitor, one of the innovative

projection monitors on the market. The goal of this manual is to

guide you through setting up and operating your Toshiba monitor as

quickly as possible.

This manual applies to model 65HC15. Before you start reading,

check the model and serial numbers on the back of your monitor.

Write these numbers in the space provided on the front cover of this

manual for your records.

Instructions in this manual are based on using the remote control.

You also can use the controls on the monitor’s front panel if they have

the same name as those on the remote control.

Please read all the safety and operating instructions carefully, and keep

the manual for future reference.

Exploring your new monitor

You can operate your monitor using the buttons on the front panel or

the remote control. The back panel and front panel (behind the door)

provide all the terminal connections you will need to connect other

equipment to your monitor. See “Connecting your Monitor” on page

123

456

ENT

100

POWER

RECALL

INPUT

+10

PIC SIZE

EXIT

INFO

STOP

MUTE SLEEP

TV/VCR PAUSE

FFREW

SKIP

SPLIT

SWAP

LIGHT

REC

FREEZE SOURCE

PLAY

CBL/SAT

VCR

DVD

VOLCH

ENTER

DVDMENU

CT-90232

Back

Front

Remote sensor

(behind the screen)

Video 3

Video/audio inputs

(behind the door)

INPUT

HDMI IN

EXIT

Volume x •

Variable Audio OUT

VIDEO 1/2

ColorStream

HD1/HD2

Audio OUT

Remote control

POWER

Power

indicator

IR OUT

NOTE: THIS MONITOR DOES

NOT CONTAIN A TUNER.

A set-top box (i.e., cable box or

analog/digital receiver) is required to

receive: (1) analog and/or digital

broadcast signals from an antenna;

and (2) analog and/or digital cable.

For more information, refer to the

applicable connection and setup

instructions in this owner’s manual.

THIS MONITOR REQUIRES

COLOR CONVERGENCE

ADJUSTMENT AFTER

SETTING UP.

Convergence may drift as a result of

relocating or adjusting the position of

the MONITOR. After setting up your

MONITOR, it is recommended that

you set the convergence.

For instructions on adjusting the color

convergence, see page 25.

#01E_07_65HC15 5/20/05, 4:22 PM7

Black

IntroductionConnecting

your Monitor

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

AppendixIndex

(E) 65HC15

Connecting your Monitor

Note: Cables except for Dual-wand IR blaster cable are not supplied with your

monitor.

●

Standard A/V (audio/video) cables usually come in sets of three, and

are typically color-coded according to use: yellow for video, red for

stereo right audio, and white for stereo left (or mono) audio.

On your monitors back panel, the standard A/V inputs are

color-coded in the same manner as the cables.

●

S-video cable is for use with video equipment that has an S-video input.

●

Component video cables come in sets of three, and are for use with

video equipment that has component video inputs. (ColorStream

Toshiba’s brand of component video.)

●

HDMI cable is for use with video equipment that has an HDMI type

A connector (see page 15).

●

Dual-wand IR blaster cable is for use with video devices with IR

(infrared) remote control. This can be used with the monitor’s IR pass-

through feature (see page 16).

Note: The IR blaster cable included with your monitor has specific

characteristics that allows them to work properly with this monitor’s IR OUT

ports. Never use other aftermarket IR blaster cable with this

monitor. Other cables may not function properly and can cause damage.

THIS TYPE OF DAMAGE IS NOT COVERED BY YOUR TOSHIBA

WARRANTY.

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba monitor:

●

For GOOD picture quality: Use a standard yellow video cable.

●

For BETTER picture quality:

If your equipment has an S-video

input, use an S-video cable instead of a standard yellow video cable.

(You still must connect the standard red and white audio cables for full

system connection, but do not connect the standard yellow video cable

at the same time, or the picture performance will be unacceptable.)

●

For BEST picture quality: If your equipment has component video (or

HDMI) inputs, use either component video cables (or an HDMI cable)

instead of a standard video or S-video cable. (A component video

connection requires separate audio cables. An HDMI connection does

not require separate audio cables.)

Component video cables

Standard A/V cables (red/white/yellow)

S-video cable

NOTICE:

RISK OF EQUIPMENT DAMAGE!

Do not plug in any power cords

until you have finished connecting all equipment.

HDMI cable

Dual-wand IR blaster cable

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

(E) 65HC15

Connecting a VCR

This connection allows you to watch video tapes.

You will need:

• one set of standard A/V cables

IN from ANT OUT to TV

CH 3

CH 4

VIDEO

AUDIO

OUT

OUT 1

OUT 2

Note:

If you have a mono VCR, connect L/Mono to

VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an

S-video cable (in the S-video terminals)

instead of the standard video cable.

Do not connect a standard video cable and

an S-video cable to Video-1 (or Video-2) at

the same time, or the picture performance

will be unacceptable.

The unauthorized recording, use,

distribution, or revision of television

programs, videotapes, DVDs, and other

materials is prohibited under Copyright

Law of the United States and other

countries, and may subject you to civil

and criminal liability.

From Cable Box or Antenna

Stereo VCR

Monitor

#01E_08-17_65HC15 5/20/05, 4:22 PM9

Black

IntroductionConnecting

your Monitor

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

AppendixIndex

(E) 65HC15

Connecting a cable converter box and VCR

This connection allows you to watch basic and premium cable

channels and watch video tapes.

To watch basic and premium cable channels, put the monitor in

VIDEO 1 mode and set the VCR to channel 3 or 4 (whichever

channel is vacant in your area), and use the converter box to change

channels.

You will need:

• two coaxial cables

• one set of standard A/V cables

IN from ANT OUT to TV

CH 3

CH 4

VIDEO

AUDIO

OUT

OUT 1

OUT 2

INOUT

Cable converter box

Stereo VCR

Note:

If you have a mono VCR, connect L/Mono to

VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S-

video cable (in the S-video terminals) instead

of a standard video cable. Do not connect a

standard video cable and an S-video cable to

Video-1 (or Video-2) at the same time, or the

picture performance will be unacceptable.

The unauthorized recording, use,

distribution, or revision of television

programs, videotapes, DVDs, and other

materials is prohibited under Copyright

Law of the United States and other

countries, and may subject you to civil

and criminal liability.

From cable

Monitor

#01E_08-17_65HC15 5/20/05, 4:22 PM10

Black

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

(E) 65HC15

From

Antenna

From

Satellite

Dish

Connecting a DVD player or satellite receiver

and a VCR

This connection allows you to watch DVD/satellite and VCR.

You will need:

• one (or two, if satellite receiver is used) coaxial cable

• one set of standard A/V cables (between the monitor and VCR)

• one S-video cable (between the monitor and DVD player/satellite

receiver)

• one pair of standard audio cables (between the monitor and DVD

player/satellite receiver)

IN from ANT OUT to TV

CH 3

CH 4

VIDEO

AUDIO

OUT

VIDEO

OUTOUT

S-VIDEO

AUDIO

OUT

IN from ANT

VIDEO

OUTOUT

S-VIDEO

AUDIO

OUT

IntroductionConnecting

your Monitor

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

AppendixIndex

(E) 65HC15

Connecting a DVD player with ColorStream

(component video) and a VCR

This connection allows you to watch DVDs and video tapes.

Your monitor has ColorStream (component video) inputs.

Connecting your monitor to a DVD player with component video

output (such as a Toshiba DVD player with ColorStream) can greatly

enhance picture quality and realism.

You will need:

• one coaxial cable

• one set of standard A/V cables

• one pair of audio cables

• one set of component video cables (one S-video cable for a DVD

player without component video inputs; see notes at right)

IN from ANT OUT to TV

CH 3

CH 4

VIDEO

AUDIO

OUT

VIDEO

OUT

S-VIDEO

AUDIO

COMPONENT VIDEO

OUT

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

(E) 65HC15

Connecting a DTV receiver/set-top box with

ColorStream

(component video) and a VCR

This connection allows you to watch DTV (digital TV), VCR, and

TV programs, and record DTV (composite video only) and TV

programs.

Your monitor has ColorStream (component video) inputs.

Connecting your monitor to a DTV receiver with component video

inputs can greatly enhance picture quality and realism.

–To watch a DTV program, select ColorStream HD2 on the

monitor.

–To record and watch the same TV program, tune the VCR to the

channel to record, and select VIDEO 1 on the monitor.

–To record one program while watching another, tune the VCR to

the channel to record, tune the DTV receiver to the channel to

watch, and select ColorStream HD2 on the monitor.

You will need:

• two coaxial cables

• two sets of standard A/V cables

• one pair of audio cables

• one set of component video cables (one S-video cable for a DTV

receiver without component video; see notes at right)

IN from ANT OUT to TV

CH 3

CH 4

VIDEO

AUDIO

OUT

VIDEO

OUT

S-VIDEO

AUDIO

COMPONENT VIDEO

OUT

Satellite IN

IntroductionConnecting

your Monitor

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

AppendixIndex

(E) 65HC15

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to

another VCR while watching a videotape.

–To record one program while watching another, tune VCR1 to the

channel to record, tune VCR2 to the channel to watch, and select

VIDEO 2 on the monitor.

You will need:

• one signal splitter

• three coaxial cables

• three sets of standard A/V cables

IN from ANT OUT to TV

CH 3

CH 4

VIDEO

AUDIO

OUT

IN from ANT OUT to TV

VIDEO AUDIO

CH 3

CH 4

OUT

OUT 1

OUT 2

OUT OUT

Splitter

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

You will need:

• one set of standard A/V cables

VIDEO

AUDIO

OUT

VIDEO

S-VIDEO

AUDIO

L/MONO

VIDEO 3 IN

Note:

If you have VCR (VCR1) with S-video, use

S-video cables instead of standard video

cables for better picture performance. Do not

connect both a standard video cable and an

S-video cable to Video-1 (or Video-2) at the

same time or the picture performance will be

unacceptable.

Do not connect the same VCR to the output

and input terminals is on the monitor at the

same time. To dub or edit, VCR 2 must select

Line IN, and the monitor must select VIDEO

*The Video OUT terminal does not output

the POP picture.

** The Audio OUT terminals can output the

sound of either the Main or POP picture

(see “Selecting the Audio OUT sound” on

page 46).

VCR1

From

Antenna

Monitor

VCR2

Note:

If you have a camcorder with S-video, use an

S-video cable instead of a standard video

cable for better picture performance. Do not

connect both a standard video cable and an

S-video cable at the same time or the picture

performance will be unacceptable.

Camcorder

Video-3 (front panel)

The unauthorized recording, use,

distribution, or revision of television

programs, videotapes, DVDs, and other

materials is prohibited under Copyright

Law of the United States and other

countries, and may subject you to civil

and criminal liability.

#01E_08-17_65HC15 5/20/05, 4:23 PM14

Black

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

(E) 65HC15

[1]

HDMI = High-Definition Multimedia Interface.

[2]

DVI = Digital Video Interface.

[3]

HDCP = High-bandwidth Digital Content Protection.

[4]

EIA/CEA-861/861B compliance covers the transmission of

uncompressed digital video with high-bandwidth digital

content protection, which is being standardized for reception

of high-definition video signals. Because this is an

evolving technology, it is possible that some

devices may not operate properly with the monitor.

Connecting an HDMI

or a DVI device to the HDMI input

Monitor

HDMI device

HDMI, the HDMI logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing, LLC.

The HDMI

[1]

input on your monitor receives digital

audio and uncompressed digital video from an HDMI

device or uncompressed digital video from a DVI

[2]

device.

This input is designed to accept HDCP

[3]

program

material in digital form from EIA/CEA-861/861B–

compliant

[4]

consumer electronic devices (such as a set-

top box or DVD player with HDMI or DVI output).

The HDMI input is designed for best performance

with 1080i high-definition video signals, but will also

accept and display 480i, 480p, and 720p signals.

VIDEO AUDIO

OUT

HDMI OUT

IntroductionConnecting

your Monitor

Using the

Remote Control

Setting up

your TV

Using the TV’s

Features

AppendixIndex

(E) 65HC15

Controlling infrared remote-controlled devices through the monitor (IR pass-through)

You can use the monitor’s IR OUT terminal (infrared pass-through)

to remotely operate (through the monitor) many infrared remote-

controlled devices (such as a Toshiba infrared remote-controlled VCR

or DVD player) enclosed within an entertainment center or similar

cabinet. Without the IR OUT connection, the device typically would

need to be visible to operate it remotely.

You will need:

• one dual-wand IR blaster cable (included with your monitor)

• other audio/video cables as required to connect the device(s) to

the monitor (see pages 8-15).

To connect the IR blaster cable:

1. Locate the infrared sensor on the front of your device. This sensor

is marked on some devices.*

2. Align one of the IR blaster cable’s wands about 1 inch away from

the infrared sensor on the front of the device and attach it using

the enclosed mounting tape. If you have a second device, attach

the second wand in a similar manner (see illustration below).

Note: If you do not have a second device, coil the second wand with a

rubber band and leave it behind the monitor.

3. Plug the IR blaster cable’s plug into the monitor’s IR OUT

terminal.

OUT 1

OUT 2

1 2 3

5 6

8 9

ENT

100

POWER

RECALL

INPUT

+10

PIC SIZE

EXIT

INFO

STOP

SLEEP

TV/VCR

PAUSE

REW

SKIP

SPLIT

SWAP

LIGHT

REC

FREEZE

SOURCE

PLAY

CBL/SAT

VCR

DVD

VOL

ENTER

DVDMENU

*If you cannot locate the device’s infrared

sensor:

1. Turn OFF the device.

2. Starting at the lower left corner of the

device, place the end of the device’s

remote control (with the infrared emitter)

so it touches the front of the device and

press POWER. (Do not use the monitor’s

remote control for this step.)

3. If the device turns on, the place that the

remote control touched the device is the

location of the sensor.

4. If the device does not turn on, move the

remote control slightly to the right and

press POWER again.

5. Repeat step 4 until you locate the

device’s infrared sensor.

To control the device(s):

Point the monitor remote control

(programmed to operate the device; see

pages 22–23) or the device’s remote

control at the front of the monitor and

press the button for the desired

function. The signal passes from the

remote control through the monitor to

the device via the IR blaster cable.

Front of IR-controlled DVD player (for example)

Front of IR-controlled audio device (for example)

Infrared

sensor

IR blaster cable wand (approx. 1 inch from device)

Back of TV

If you use the device’s remote control

to operate the device, you also will

need to use the monitor’s remote

control to operate the monitor.

#01E_08-17_65HC15 5/20/05, 4:23 PM16

Black

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

(E) 65HC15

Connecting an audio system

This connection allows you to use an audio amplifier and external

speakers and adjust the audio level using the monitor’s remote

control.

To control the audio, turn on the monitor and the stereo amplifier,

and turn off the built-in speakers (see “Turning off the built-in

speakers” on page 45).

You will need:

• one pair of standard audio cables

LINE IN

OUT 1

OUT 2

Note:

To hear sound when using an external audio

amplifier, the volume of both the monitor and

the amplifier must be set above 0 (zero).

For example, if the volume of the monitor is

set to 0, you will not be able to hear any

sound even if the volume of the amplifier is at

its highest level.

Monitor

Amplifier

#01E_08-17_65HC15 5/20/05, 4:23 PM17

Black

IntroductionConnecting

your TV

Using the

remote control

Setting up

your TV

Using the TV’s

Features

AppendixIndex

(E) 65HC15

Squeeze tab and

lift cover.

Note:

• Be sure to use AA size batteries.

• Dispose of batteries in a designated

disposal area.

• Batteries should always be disposed of with

the environment in mind. Always dispose of

batteries in accordance with applicable laws

and regulations.

• If the remote control does not operate

correctly, or if the operating range becomes

reduced, replace batteries with new ones.

•When necessary to replace batteries in the

remote control, always replace both

batteries with new ones. Never mix battery

types or use new and used batteries in

combination.

• Always remove the batteries from the

remote control if they are dead or if the

remote control is not to be used for an

extended period of time.

This will prevent battery acid from leaking

into the battery compartment.

Caution:

• Never throw batteries into a fire.

Using the remote control

Preparing the remote control for use

Your monitor remote control can operate your monitor and most

cable converter boxes, satellite receivers, VCRs, DVD players, and

HTIBs (home theater in a box), even if they are different brands.

If you have a Toshiba device:

Your monitor remote control is preprogrammed to operate most

Toshiba devices. See pages 20–21.

If you have a non-Toshiba device or a Toshiba device

that the remote control is not preprogrammed to

operate:

You can program the monitor remote control so it will operate the

other device. See pages 20–23.

Installing the remote control batteries

1. Remove the battery cover from the back of the remote control.

2. Install two “AA” size batteries, making sure to match the + and –

signs on the batteries to the signs on the battery compartment.

3. Reinsert the battery cover in the remote control until the tab

snaps.

Remote control effective range

For optimum performance, aim the remote control directly at the

monitor and make sure there is no obstruction between the remote

control and the monitor.

Note:

Your monitor’s remote control may not

operate certain features on your VCR or other

electronic device.

Refer to the owner’s manuals for your other

devices to determine their available features.

If your monitor’s remote control does not

operate a specific feature on a device, use the

remote control that came with the device.

#01E_18-23_65HC15 5/20/05, 4:23 PM18

Black

IntroductionConnecting

your Monitor

Using the

remote control

Setting up

your Monitor

Operating your

Monitor

AppendixIndex

(E) 65HC15

Note:

The error message “Not Available” will appear

if you press a key for a function that is not

available.

Learning about the remote control

The buttons used for operating the monitor only are described here.

POWER turns the monitor on and off

RECALL displays monitor status information on-screen (page 47)

SLEEP sets the monitor to turn off at a specific time (page 42)

INPUT selects the video input source (page 40)

MUTE reduces or turns off the sound (page 43)

Device Switch switches among TV, CBL/SAT, VCR, and DVD modes

(pages 20-23)

Set to “TV” to control the monitor.

Numbers (0-9, 100) enters the numbers directly

VOL (volume) y z adjusts the volume level

MENU accesses the on-screen system (page 24)

ENTER activates the function settings in the menu (page 24)

y z x • (arrows) select or adjust items in the menus (page 24)

PIC SIZE cycles through the five picture sizes: Natural,

TheaterWide 1, 2, 3, and Full (page 27)

EXIT closes on-screen menus (page 24)

SPLIT turns the POP feature on and off (page 31)

SOURCE selects the POP picture source (page 31)

FREEZE freezes the picture. Press again to restore the moving picture.

SWAP switches the main and POP pictures (page 32)

LIGHT illuminates the keypad for five seconds

123

456

ENT

100

POWER

RECALL

INPUT

+10

PIC SIZE

EXIT

INFO

STOP

MUTE SLEEP

TV/VCR PAUSE

FFREW

SKIP

SPLIT

SWAP

LIGHT

REC

FREEZE SOURCE

PLAY

CBL/SAT

VCR

DVD

VOLCH

ENTER

DVDMENU

CT-90232

#01E_18-23_65HC15 5/20/05, 4:23 PM19

Black

IntroductionConnecting

your TV

Using the

remote control

Setting up

your TV

Using the TV’s

Features

AppendixIndex

(E) 65HC15

SKIP/SEARCH

Skips back to beginning of current DVD

chapter or locates previous chapters.

SKIP/SEARCH

Skips forward to locate later DVD

chapters.

STOP

Stops the tape or DVD.

PLAY

Begins playback of a tape or DVD.

PAUSE

Press during play or record mode to

pause the picture; press again to restart.

CH y z

y selects the next higher channel;

z selects the next lower channel.

CLEAR

Press to reset the DVD title and chapter

number.

y z x •

Press to navigate DVD menus (may not

work on some DVD players).

DVD MENU

Accesses DVD menus.

Channel Numbers (0-9)

Press to directly access channels (as

opposed to CH y z).

RECALL/INFO

Displays on-screen information.

POWER

Turns the selected device on and off.

Using the remote control to operate your other

devices

If you have a non-Toshiba device or a Toshiba device that the remote

control is not preprogrammed to operate, you must first program the

remote control to recognize the device (if you have not already done

so). See pages 22 and 23.

To use your monitor remote control to operate a:

• Cable converter box or satellite receiver, set the Device Switch to

“CBL/SAT”.

•VCR, set the Device Switch to “VCR”.

•DVD player or HTIB, set the Device Switch to “DVD”.

Note:

Even after the monitor remote control is

programmed, it may not operate certain

features on your other device. If this happens

and you wish to use those features, you will

need to use the device’s original remote

control.

Page is loading ...

Toshiba Computer Monitor 65HC15 User manual

Brand: Toshiba

Model: Computer Monitor 65HC15

Category: LCD TVs

Type: User manual

This manual is also suitable for

65HC15

Download PDF

report

Toshiba Computer Monitor 65HC15 User manual

This manual is also suitable for

Toshiba Computer Monitor 65HC15 User manual

Related papers

Other documents