2. Moog
  3. Syncing Multiple DFAMs

Moog Syncing Multiple DFAMs Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Moog Syncing Multiple DFAMs Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
30
SYNCING MULTIPLE DFAMS
To Sync multiple DFAM units together,
simply patch from the TRIGGER
output on the Patchbay of the Primary
unit, into the ADV / CLOCK input on
the Secondary unit.
Press RUN / STOP on the Secondary unit first. This will ensure that it is ready to
play when it begins receiving a Clock signal from the Primary unit.
Press RUN / STOP on the Primary unit. Both units should now be playing in sync.
PRIMARY UNIT SECONDARY UNIT
SECONDARY UNIT
PRIMARY UNIT
/