Garmin Nexus Owner's manual

TB1

How to connect a Navicontrol AP 203 PLUS, 303 PLUS and

3003 PLUS autopilot to the Server.

In this connection you should be

able to steer the autopilot with

GPS data, such as BTW, XTE

etc, as reference.

You can not use wind as

steering reference.

AP203, 303 and

3003 PLUS

PROCESSOR

BOX

The settings:

Server:

Some of the calibration codes C79 - C93

have to be set to send:

GGL, RMB, RMC, APA, APB, BOD and XTE.

Navicontrol:

Please look in the manual how to activate the

autopilot to steer with GPS data as reference.

NX2T7a

OUTPUT B

GREEN5.

YELLOW

WHITE

SCREEN

NETWORK

+12 V1.

0 V

OUTPUT A

NMEA